Search NASA⌕ Search

Engineering topics

Piot, Philippe

Publications and source records attributed to Piot, Philippe.

At least 55 records · Page 3

Application of Transverse-to-Longitudinal Phase-Space-Exchanged Beam Produced from a Nano-Structure Photocathode to a Soft X-Ray Free-Electron Laser

Nano-structured cathodes can form transversely modulated beams which can be subsequently converted to temporally modulated beam via a transverse-to-longitudinal phase space-exchanging beamline. We demonstrate via numerical simulation the generation of transversely modulated beam at the nm scale and investigate the corresponding enhancement in a soft-X-ray SASE free-electron laser. Our study is supported by start-to-end simulation combining WARP, IMPACT-T and GENESIS(FEL process) and focuses on the optimization of the beamline to preserve initial modulation at the nanometer level. We also discuss the scaling of the concept to shorter-wavelengths.

43 PARTICLE ACCELERATORS↗

Emittance Measurements at FAST Facility

The FAST facility at Fermilab recently been commissioned has demonstrated the generation of electron beam within a wide range of parameter (energy, charge) suitable for accelerator-science and beam-physics experiments. This accelerator consists of a photo-electron gun, injector, ILC-type cryomodules, and multiple downstream beam-lines. It will mainly serve as injector for the upcoming Integrable Optical Test Accelerator (IOTA). At the same time we will also carry out a LINAC based intense gamma ray experiment based on the Inverse Compton scattering. It is essential to understand the beam emittance for both experiments. A number of techniques are used to characaterizing the beam emittance including slit based method and quad scan method. An on-line emittance measurement based on multi-slit method is developed so the emittance measured will be immediately available to support further beam optimization. In this report we will present the results from the emittance studies using this tool. We will also present the emittance measurement based on quads scan technique for the high energy beam line.

43 PARTICLE ACCELERATORS↗

Coherent Stacking Scheme for Inverse-Compton Scattering at MHz Repetition Rates

An experiment to produce 1-MeV gamma rays via Compton back-scattering of infrared photons on 250-MeV electron bunches is currently in preparation at the Fermilab Accelerator Science & Technology (FAST) facility. To increase the gamma-ray flux the energy of the infrared laser pulses are planned to be amplified within the interaction region using a resonant cavity. This passive amplifier composed of a Fabry-Perot cavity will allow the laser pulse bunches to coherently and constructively stack. Our estimates, based on theoretical models, show that the laser pulse energy can be increased from approximately 1-2 mJ at the exit of the last active amplifier to 5 -10 mJ at the interaction point when the laser repetition rate is set at the nominal value of 3 MHz. This paper details the cavity design option(s) and associated wave-optic simulations.

43 PARTICLE ACCELERATORS↗

A Remarkable Return On Investment In Fundamental Research: 40 Years of Basic Energy Sciences at the Department of Energy

In 1977, the Department of Energy established an office of Basic Energy Sciences (BES) to support fundamental research in areas pertinent to DOE missions. In the 40 years since its founding, BES has grown substantially, supporting both individual researchers and interdisciplinary teams of researchers at universities and national laboratories. It engages with the scientific community through an extensive network of advisory committees that help BES to identify high priority problems or areas of opportunity. BES has also created unique shared research facilities, open to all scientists, which have become a distinctive feature of the U.S. research effort and have greatly increased the productivity of university, federal, and industrial research efforts. BES collaborates closely with other federal research agencies, including other DOE offices focused on applied research. Such research often builds on new scientific knowledge generated by BES and advances it toward commercial technologies. In all, BES represents a bet on the future—a significant federal investment in new knowledge.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synchronous acceleration with tapered dielectric-lined waveguides

Here, we present a general concept to accelerate non-relativistic charged particles. Our concept employs an adiabatically-tapered dielectric-lined waveguide which supports accelerating phase velocities for synchronous acceleration. We propose an ansatz for the transient field equations, show it satisfies Maxwell's equations under an adiabatic approximation and find excellent agreement with a finite-difference time-domain computer simulation. The fields were implemented into the particle-tracking program {\sc astra} and we present beam dynamics results for an accelerating field with a 1-mm-wavelength and peak electric field of 100~MV/m. The numerical simulations indicate that a $\sim 200$-keV electron beam can be accelerated to an energy of $\sim10$~MeV over $\sim 10$~cm. The novel scheme is also found to form electron beams with parameters of interest to a wide range of applications including, e.g., future advanced accelerators, and ultra-fast electron diffraction.

43 PARTICLE ACCELERATORS↗

Time-Resolved Electron-Bunch Diagnostics Using Transverse Wakefields

The development of future free electron lasers (FELs) requires reliable time-resolved measurement of variable ultra-short electron-bunchs characteristics. A possible technique is to streak the bunch in the transverse direction by means of time-dependent external fields. In this paper we explore the possible use of self-generated electromagnetic fields *. A passive deflector, consisting of a dielectric-lined waveguide, is used to produce wakefields that impart a time-dependent transverse kick to the relativistic electron bunch passing off-axis. We investigate the technique and its performances and explore its possible application at the Fermilab Accelerator Science & Technology (FAST) facility.

43 PARTICLE ACCELERATORS↗

High Spectral Density Compton Back-Scattered Gamma-Ray Sources at Fermilab

A ~1 MeV gamma-ray source is planned to be built at Fermilab following the completion of the ~300 MeV superconducting linac. The high-energy photons are back-scattered from the interactions between electrons and high-intensity IR laser pulses. In this contribution, we discuss some of the experiment design challenges and evaluate the performances of the gamma-ray source. We expect the peak brilliance to be of the order of 10²² photons/s-(mm-mrad)²-0.1\% BW and the spectral density of the radiation in excess of 3x10⁵ photons/s/eV.

43 PARTICLE ACCELERATORS↗

Laser-Induced Linear-Field Particle Acceleration in Free Space

Linear-field particle acceleration in free space (which is distinct from geometries like the linac that requires components in the vicinity of the particle) has been studied for over 20 years, and its ability to eventually produce high-quality, high energy multi-particle bunches has remained a subject of great interest. Arguments can certainly be made that linear-field particle acceleration in free space is very doubtful given that first-order electron-photon interactions are forbidden in free space. Nevertheless, we chose to develop an accurate and truly predictive theoretical formalism to explore this remote possibility when intense, few-cycle electromagnetic pulses are used in a computational experiment. The formalism includes exact treatment of Maxwell’s equations and exact treatment of the interaction among the multiple individual particles at near and far field. Several surprising results emerge. We find that electrons interacting with intense laser pulses in free space are capable of gaining substantial amounts of energy that scale linearly with the feld amplitude. For example, 30keV electrons (2.5% energy spread) are accelerated to 61MeV (0.5% spread) and to 205MeV (0.25% spread) using 250 mJ and 2.5J lasers respectively. Furthermore, these findings carry important implications for our understanding of ultrafast electron-photon interactions in strong fields.

43 PARTICLE ACCELERATORS↗

A Phase Matching, Adiabatic Accelerator

Tabletop accelerators are a thing of the future. Reducing their size will require scaling down electromagnetic wavelengths; however, without correspondingly high field gradients, particles will be more susceptible to phase-slippage – especially at low energy. We investigate how an adiabatically-tapered dielectric-lined waveguide could maintain phase-matching between the accelerating mode and electron bunch. We benchmark our simple model with CST and implement it into ASTRA; finally we provide a first glimpse into the beam dynamics in a phase-matching accelerator.

43 PARTICLE ACCELERATORS↗

IOTA (Integrable Optics Test Accelerator): Facility and experimental beam physics program

The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. Finally, the physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.

43 PARTICLE ACCELERATORS↗

Numerical simulations of early-stage dynamics of electron bunches emitted from plasmonic photocathodes

High-brightness electron sources are a key ingredient to the development of compact accelerator-based light sources. The electron sources are commonly based on (linear) photoemission process where a laser pulse with proper wavelength impinges on the surface of a metallic or semiconductor photocathode. Very recently, the use of plasmonic cathodes - cathodes with a nano-patterned surface - have demonstrated great enhancement in quantum efficiencies (Li et al., 2013 [1]). Alternatively, this type of photocathodes could support the formation of structured beams composed of transversely-separated beamlets. In this paper we discuss numerical simulations of the early-stage beam dynamics of the emission process from plasmonic cathodes carried out using the Warp (Friedman et al., 2014 [2]) framework. Furthermore, the model is used to investigate the properties of beams emitted from these photocathode and subsequently combined with particle-in-cell simulations to explore the imaging of cathode pattern after acceleration in a radiofrequency gun.

43 PARTICLE ACCELERATORS↗

Generation of Homogeneous and Patterned Electron Beams using a Microlens Array Laser-Shaping Technique

In photocathodes the achievable electron-beam parameters are controlled by the laser used to trigger the photoemission process. Non-ideal laser distribution hampers the final beam quality. Laser inhomogeneities, for instance, can be "amplified" by space-charge force and result in fragmented electron beams. To overcome this limitation laser shaping methods are routinely employed. In the present paper we demonstrate the use of simple microlens arrays to dramatically improve the transverse uniformity. We also show that this arrangement can be used to produce transversely-patterned electron beams. Our experiments are carried out at the Argonne Wakefield Accelerator facility.

43 PARTICLE ACCELERATORS↗

Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator

Emittance exchange (EEX) based longitudinal current profile shaping is the one of the promising current profile shaping technique. This method can generate high quality arbitrary current profiles under the ideal conditions. The double dog-leg EEX beam line was recently installed at the Argonne Wakefield Accelerator (AWA) to explore the shaping capability and confirm the quality of this method. To demonstrate the arbitrary current profile generation, several different transverse masks are applied to generate different final current profiles. The phase space slopes and the charge of incoming beam are varied to observe and suppress the aberrations on the ideal profile. We present current profile shaping results, aberrations on the shaped profile, and its suppression.

43 PARTICLE ACCELERATORS↗

Preliminary Measurement of the Transfer Matrix of a TESLA-type Cavity at FAST

Superconducting linacs are capable of producing intense, ultra-stable, high-quality electron beams that have widespread application in Science and Industry. Many current and planned projects employ 1.3-GHz 9-cell superconducting cavities of the TESLA design*. In the present paper we discuss the transverse-focusing properties of such a cavity and non-ideal transverse-map effects introduced by field asymmetries in the vicinity of the input and high-order-mode radiofrequency (RF) couplers**. We especially consider the case of a cavity located downstream of an RF-gun in a setup similar to the photoinjector of the Fermilab Accelerator Science and Technology (FAST) facility. Preliminary experimental measurements of the CC2 cavity transverse matrix were carried out at the FAST facility. The results are discussed and compared with analytical and numerical simulations.

43 PARTICLE ACCELERATORS↗

Expected Results From Channeling Radiation Experiments at Fast

The photoinjector at the new Fermilab FAST facility will accelerate electron beams to about 50 GeV. After initial beam commissioning, channeling radiation experiments to generate hard X-rays will be performed. In the initial stage, low bunch charge beams will be used to keep the photon count rate low and avoid pile up in the detector. We report here on the optics solutions, the expected channaling spectrum including background from bremmstrahlung and the use of a Compton scatterer for higher bunch charge operation.

43 PARTICLE ACCELERATORS↗

Nonlinear Phase Distortion in a Ti:Sapphire Optical Amplifier for Optical Stochastic Cooling

Optical Stochastic Cooling (OSC) has been considered for future high-luminosity colliders as it offers much faster cooling time in comparison to the micro-wave stochastic cooling. The OSC technique relies on collecting and amplifying a broadband optical signal from a pickup undulator and feeding the amplified signal back to the beam. It creates a corrective kick in a kicker undulator. Owing to its superb gain qualities and broadband amplification features, Titanium:Sapphire medium has been considered as a gain medium for the optical amplifier (OA) needed in the OSC*. A limiting factor for any OA used in OSC is the possibility of nonlinear phase distortions. In this paper we experimentally measure phase distortions by inserting a single-pass OA into one leg of a Mach-Zehnder interferometer. The measurement results are used to estimate the reduction of the corrective kick a particle would receive due to these phase distortions in the kicker undulator.

43 PARTICLE ACCELERATORS↗

Light Optics for Optical Stochastic Cooling

In Optical Stochastic Cooling (OSC) radiation generated by a particle in a "pickup" undulator is amplified and transported to a downstream "kicker" undulator where it interacts with the same particle which radiated it. Fermilab plans to carry out both passive (no optical amplifier) and active (optical amplifier) tests of OSC at the Integrable Optics Test Accelerator (IOTA) currently in construction*. The performace of the optical system is analyzed with simulations in Synchrotron Radiation Workshop (SRW) accounting for the specific temporal and spectral properties of undulator radiation and being augmented to include dispersion of lens material.

43 PARTICLE ACCELERATORS↗