Search NASA⌕ Search

Engineering topics

Planes, Antoni

Publications and source records attributed to Planes, Antoni.

Caloric Effects Induced by Uniform and Non-uniform Stress in Shape-Memory Materials

A Ginzburg–Landau model is developed that is adequate to describe a square-to-rectangle martensitic transition with associated shape-memory and superelastic properties. Using this model we study caloric effects in the vicinity of the martensitic transition induced by stress and we compare the case of a uniform uniaxial stress and the case of a non-uniform continuous distribution of stresses that produce bending of the material. The former case corresponds to an elastocaloric effect and the latter corresponds to a flexocaloric effect. The aim of the work is to quantitatively compare both cases, which we show must be accomplished in terms of equal amounts of exchanged mechanical work. It is then obtained that the flexocaloric effect is more efficient for low exchanged work but less efficient for large exchanged work.

36 MATERIALS SCIENCE↗

Flexocaloric effect in superelastic materials

We present a combined theoretical–experimental study of flexocaloric effects in superelastic materials exhibiting structural transitions. We study a Ginzburg–Landau model combined with a vibrational model for a beam near a ferroelastic transition loaded with a three-point bending setup. We also perform experiments on a Cu–Al–Ni single crystal undergoing a martensitic transition. We measure bent beam profiles, vertical force vs vertical deflection during a slow isothermal process, time evolution of the bending and unbending amplitudes, and the evolution of temperature profiles. We also compute the evolution of heat source and heat sink profiles. Finally, we study the location of acoustic emission events during the bending/unbending experiment. Our observations are consistent with the model predictions and allow us to identify the main physical parameters relevant for flexocaloric applications.

36 MATERIALS SCIENCE↗

Flexocaloric effect near a ferroelastic transition

A Ginzburg-Landau model embedded into a vibrational model is used to study the flexocaloric effect in a beam near a ferroelastic transition. The caloric response upon bending is characterized by the isothermal entropy change and the adiabatic temperature change of the beam. Here, we obtain a larger response relative to the strength of the applied forces at temperatures slightly above the transition temperature. It is also obtained that the maximum caloric response is almost linear with the bending angle of the beam, whereas the relation between the bending angle and the applied forces is highly nonlinear. Small hysteresis associated with the phase transition is obtained for sufficiently large bending forces due to the existence of a critical point in the temperature-stress phase diagram of the ferroelastic material. Finally, the microstructure changes with bending in the beam are consistent with previous experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant and Reversible Barocaloric Effect in Trinuclear Spin–Crossover Complex Fe 3 (bntrz) 6 (tcnset) 6

A giant barocaloric effect (BCE) in a molecular material Fe 3 (bntrz) 6 (tcnset) 6 (FBT) is reported, where bntrz = 4-(benzyl)-1,2,4-triazole and tcnset = 1,1,3,3-tetracyano-2-thioethylepropenide. The crystal structure of FBT contains a trinuclear transition metal complex that undergoes an abrupt spin-state switching between the state in which all three FeII centers are in the high-spin (S = 2) electronic configuration and the state in which all of them are in the low-spin (S = 0) configuration. Despite the strongly cooperative nature of the spin transition, it proceeds with a negligible hysteresis and a large volumetric change, suggesting that FBT should be a good candidate for producing a large BCE. Powder X-ray diffraction and calorimetry reveal that the material is highly susceptible to applied pressure, as the transition temperature spans the range from 318 at ambient pressure to 383 K at 2.6 kbar. Despite the large shift in the spin-transition temperature, its nonhysteretic character is maintained under applied pressure. Such behavior leads to a remarkably large and reversible BCE, characterized by an isothermal entropy change of 120 J kg –1 K –1 and an adiabatic temperature change of 35 K, which are among the highest reversible values reported for any caloric material thus far.

36 MATERIALS SCIENCE↗

Influence of the number of orientational domains on avalanche criticality in ferroelastic transitions

In this work, we study the relationship between avalanche criticality and the number of orientational domains in ferroelastic transitions. To this end, we use a general Ginzburg-Landau model appropriate for displacive transitions of the square lattice. The model includes disorder as a quenched distribution of local transition temperatures. We focus on the square-to-rectangle and the square-to-oblique ferroelastic transitions, which have two and four orientational domains, respectively, which in turn determine the corresponding degeneracy of the ground state of the system. The phase transitions are driven by temperature under the assumption of a strict athermal behavior. That is, we assume that thermal fluctuations do not play any role. Numerical results are obtained using a purely relaxational dynamics, and it is shown that both the square-to-rectangle and the square-to-oblique transitions occur intermittently in the form of avalanches. Avalanche sizes and avalanche energies are found to display power-law distributions, which corroborates avalanche criticality. We compare and contrast the dependence of avalanche criticality on the number of orientational domains of the low-symmetry phase. It is found that the critical exponents depend on that number, in agreement with recent experimental results.

36 MATERIALS SCIENCE↗

Colossal Elastocaloric Effect in Ferroelastic Ni-Mn-Ti Alloys

Energy-efficient and environment-friendly elastocaloric refrigeration, which is a promising replacement of the conventional vapor-compression refrigeration, requires extraordinary elastocaloric properties. Hitherto the largest elastocaloric effect is obtained in small-size films and wires of the prototype NiTi system. Here, we report a colossal elastocaloric effect, well exceeding that of NiTi alloys, in a class of bulk polycrystalline NiMn-based materials designed with the criterion of simultaneously having large volume change across phase transition and good mechanical properties. The reversible adiabatic temperature change reaches a strikingly high value of 31.5 K and the isothermal entropy change is as large as 45 J kg –1 K –1 . The achievement of such a colossal elastocaloric effect in bulk polycrystalline materials should push a significant step forward towards large-scale elastocaloric refrigeration applications. As a result, our design strategy may inspire the discovery of giant caloric effects in a broad range of ferroelastic materials.

36 MATERIALS SCIENCE↗

Intermittent dynamics in externally driven ferroelastics and strain glasses

The interplay of elastic anisotropy and disorder dictates many of the properties of ferroic materials, specifically martensites. Here we use a phase-field model for ferroelastic athermal materials to study their response to an increasing external stress that couples to the strain order parameter. We show that these systems evolve through avalanches and study the avalanche-size distribution for ferroelastic systems (large anisotropy and/or small disorder) and for the strain glass (small anisotropy and/or large disorder) using various statistical analysis techniques, including the maximum likelihood method. The model predicts that in the former case the distribution is subcritical or power law (in agreement with experimental observations), whereas in the latter case it becomes supercritical. Finally, our results are consistent with experiments on martensitic materials, and we predict specific avalanche behavior that can be tested and used as an alternative means to characterize strain glasses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiferroic and Related Hysteretic Behavior in Ferromagnetic Shape Memory Alloys

In this work, we combine a Ginzburg–Landau model for a ferroelastic transition with the theory of micromagnetism to study the magnetostructural behavior leading to multicaloric effects in ferromagnetic shape memory alloys. We analyze the ferroelastic transition under different conditions of temperature, stress and magnetic field and establish the corresponding phase diagram. On the one hand, our results show that the proper combination of both fields may be used to reduce the transition hysteresis and thus improve the reversibility of the related elastocaloric effects, superelasticity and stress-mediated magnetocaloric effects. On the other hand, the stress-free magnetic field-driven and thermally driven magnetostructural evolution provides physical insight into the low-temperature field-induced domain reorientation, from which we derive strategies to modify the operational temperature ranges and thus the corresponding (magnetic) shape-memory effect.

36 MATERIALS SCIENCE↗

Thermodynamics of multicaloric effects in multiferroic materials: application to metamagnetic shape-memory alloys and ferrotoroidics

In this paper, we develop a general thermodynamic framework to investigate multicaloric effects in multiferroic materials. This is applied to the study of both magnetostructural and magnetoelectric multiferroics. Landau models with appropriate interplay between the corresponding ferroic properties (order parameters) are proposed for metamagnetic shape-memory and ferrotoroidic materials, which, respectively, belong to the two classes of multiferroics. For each ferroic property, caloric effects are quantified by the isothermal entropy change induced by the application of the corresponding thermodynamically conjugated field. The multicaloric effect is obtained as a function of the two relevant applied fields in each class of multiferroics. It is further shown that multicaloric effects comprise the corresponding contributions from caloric effects associated with each ferroic property and the cross-contribution arising from the interplay between these ferroic properties. Finally, this article is part of the themed issue ‘Taking the temperature of phase transitions in cool materials’.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Barocaloric effect in the magnetocaloric prototype Gd5Si2Ge2

We report on calorimetric measurements under hydrostatic pressure that enabled us to determine the barocaloric effect in Gd5Si2Ge2. The values for the entropy change for moderate pressures compare favourably to those corresponding to the magnetocaloric effect in this compound. Entropy data are complemented with direct measurements of the adiabatic pressure-induced temperature change.

36 MATERIALS SCIENCE↗