Engineering topics
Polit-Casillas, Raul
Publications and source records attributed to Polit-Casillas, Raul.
Robotic lunar surface operations 2
The paper presents an overview of the ground rules, assumptions, methodology, operations model, element designs, base site plan, and quantitative findings. These findings include the performance of various regolith and ice resource utilization schemes as a function of base location and lunar surface parameters. The paper closes with short lists of the highest priority experiments and demonstrations needed on the lunar surface to retire key planning unknowns.
Sylph: Life Detection Probe for a Europa Plume
Jupiter’s Galilean satellite Europa likely contains a vast, global, subsurface salt-water ocean. A singular telescope observation in 2012 indicated possible plume activity, in some ways similar to the continuous plume activity seen at Enceladus. If a Europan plume does expel ocean water into space, its vapor, ice grains, and dust grains could be analyzed by a spacecraft equipped with high-resolution mass spectrometers. Such plume measurements would be sufficient to measure the contextual habitability profile of the ocean, and to detect multiple signatures of life, should it exist in the ocean. Instrumented with MASPEX (Mass Spectrometer for Planetary Exploration) and SUDA (Surface Dust Analyzer), NASA’s planned Europa Mission now in development could theoretically conduct this investigation. However, the mission’s closest flyby altitude would be 25 km; due to Europa’s large gravity, frozen ocean spray containing non-volatile molecular species critical to biosignature detection can be sampled only within 5 km of the surface. The Europa Mission would not fly this low. Sylph is a concept for a complementary, free-flyer smallsat probe, about the same size as an office water-cooler bottle, that could be deployed by the Europa Mission as it conducts a plume fly-through. Sylph would execute a single ~2 km altitude plume pass below the main spacecraft. With a mass of 40 kg and a 24-hr life, the probe would autonomously navigate its low-altitude pass, and carry a dualchannel Mini-SUDA impact ionization mass spectrometer that would measure the composition of large grains, complementing the main spacecraft’s measurements of small grains and gas. Sylph is a novel smallsat concept: purpose-built configuration optimized for both the harsh Jovian environment and for Europan planetary-protection requirements, and built with advanced manufacturing methods from both deep space and smallsat components. For $80M (~4% marginal cost), the Europa Mission could buy a Sylph “insurance policy,” hedging the possibility that it does discover ocean plumes upon arrival in 2028. At less than 85 kg for probe and accommodations, the mission could carry two or three of the probes.
Designing for Additive Manufacturing in the Space Industry
No abstract available
Sylph - A SmallSat Probe Concept Engineered to Answer Europa's Big Question
Europa, the Galilean satellite second from Jupiter, contains a vast, subsurface ocean of liquid water. Recent observations indicate possible plume activity. If such a plume expels ocean water into space as at Enceladus, a spacecraft could directly sample the ocean by analyzing the plume’s water vapor, ice, and grains. Due to Europa’s strong gravity, such sampling would have to be done within 5 km of the surface to sample ice grains larger than 5 µm, expected to be frozen ocean spray and thus to contain non-volatile species critical to a biosignature-detection mission. By contrast, the planned Europa Multiple Flyby Mission’s closest planned flyby altitude is 25 km. Sylph is a concept for a SmallSat free-flyer probe that, deployed from the planned Europa Mission, would directly sample the large grains by executing a single ~2-km altitude plume pass. The 40-kg probe would be deployed by the Europa mission just before it executes a plume fly-through. Within the probe’s 16-hour lifespan, it would autonomously navigate to perform a parallel, simultaneous pass at the lower altitude. The Sylph flight system design concept combines SmallSat technologies with robust traditional components and advanced manufacturing technologies. Its payload would comprise Mini-SUDA (SUrface Dust Mass Analyzer), a dual-channel, miniature impact ionization mass spectrometer. Sylph represents a novel type of SmallSat concept: purpose-built configuration, optimized for the harsh environment at Europa and for planetary-protection requirements, and hybridized from both mainstream and SmallSat components.
The Hidden Dimensions of Architecture and Engineering Design
The art of going from a notional vision of a system to a fully realizable design is called “architecting.” For an architecture to be realizable over its lifetime, it has to conform to many demands. Not only does it need to conform to the vision and its ultimate purpose, it needs to adhere to a world of requirements: affordability, reliability, legality, operability, simplicity, analyzability, testability, understandability, accessibility, manufacturability, and repairability, among many others. Ultimately, the architectures that “hang together” in many or all of these dimensions evoke a sense of elegance and beauty. Please join us as Frank Gehry and JPLers Rob Manning and Raul Polit-Casillas discuss examples of design and architecture, and the importance of a well-thought-out design.
Random Access Frame (RAF) System Neutral Buoyancy Evaluations
The Random Access Frame (RAF) concept is a system for organizing internal layouts of space habitats, vehicles, and outposts. The RAF system is designed as a more efficient improvement over the current International Standard Payload Rack (ISPR) used on the International Space Station (ISS), which was originally designed to allow for swapping and resupply by the Space Shuttle. The RAF system is intended to be applied in variable gravity or microgravity environments. This paper discusses evaluations and results of testing the RAF system in a neutral buoyancy facility simulating low levels of gravity that might be encountered in a deep space environment.
Random Access Frames (RAF): Alternative to Rack and Standoff for Deep Space Habitat Outfitting
A modular Random Access Frame (RAF) system is proposed as an alternative to the International Standard Payload Rack (ISPR) for internal module layout and outfitting in a Deep Space Habitat (DSH). The ISPR approach was designed to allow for efficient interchangeability of payload and experiments for the International Space Station (ISS) when frequent resupply missions were available (particularly the now-retired Space Shuttle). Though the standard interface approach to the ISPR system allowed integration of subsystems and hardware from a variety of sources and manufacturers, the heavy rack and standoff approach may not be appropriate when resupply or swap-out capabilities are not available, such as on deep space, long-duration missions. The lightweight RAF concept can allow a more dense packing of stowage and equipment, and may be easily broken down for repurposing or reuse. Several example layouts and workstations are presented.
Virtual Construction of Space Habitats: Connecting Building Information Models (BIM) and SysML
Current trends in design, construction and management of complex projects make use of Building Information Models (BIM) connecting different types of data to geometrical models. This information model allow different types of analysis beyond pure graphical representations. Space habitats, regardless their size, are also complex systems that require the synchronization of many types of information and disciplines beyond mass, volume, power or other basic volumetric parameters. For this, the state-of-the-art model based systems engineering languages and processes - for instance SysML - represent a solid way to tackle this problem from a programmatic point of view. Nevertheless integrating this with a powerful geometrical architectural design tool with BIM capabilities could represent a change in the workflow and paradigm of space habitats design applicable to other aerospace complex systems. This paper shows some general findings and overall conclusions based on the ongoing research to create a design protocol and method that practically connects a systems engineering approach with a BIM architectural and engineering design as a complete Model Based Engineering approach. Therefore, one hypothetical example is created and followed during the design process. In order to make it possible this research also tackles the application of IFC categories and parameters in the aerospace field starting with the application upon the space habitats design as way to understand the information flow between disciplines and tools. By building virtual space habitats we can potentially improve in the near future the way more complex designs are developed from very little detail from concept to manufacturing.
MAGNETOUR : Surfing Planetary Systems on Electromagnetic and Multi-Body Gravity Fields
No abstract available
Applied Space Architecture: Advanced Constructive Design or How to Bring Space Down to Earth so We Can Keep Sending Mankind to the Stars
No abstract available