Search NASASearch

Engineering topics

Polk, J.

Publications and source records attributed to Polk, J..

At least 19 records

A WOUND CARE AND INTRAVENOUS ACCESS SUMMIT FOR ON-ORBIT CARE

Wound care issues and the ability to establish intravenous (IV) access among injured or ill crew members are a source of concern for NASA flight surgeons. Indeed, the microgravity environment and the remote nature of the International Space Station (ISS) pose unique challenges in diagnosing and treating an injured astronaut. Therefore, it is necessary to identify and adapt the best evidence based terrestrial practices regarding wound care, hemostasis, and IV access for use on the ISS. Methods: A panel of consultants was convened to evaluate the adequacy of the current ISS in-flight medical system for diagnosis and treatment of wounds and establishing IV access by a nonclinician crew medical officer. Participants were acknowledged experts in terrestrial wound care and/or operational medicine. Prior to the meeting, each panelist was encouraged to participate in a pre-summit online forum. Results: Eight external experts participated in a face-to-face meeting held at NASA-Johnson Space Center. Recommendations were made to augment the space station pharmacopoeia, as well as current wound care diagnostic, therapeutic, and deorbit criteria protocols. Additionally, suggestions were offered regarding IV access techniques and devices for use in the microgravity environment. Discussion: The results of the expert panel provide an evidence-based approach to the diagnosis and care of wounds in an injured astronaut on aboard the ISS. The results of the panel underscored the need for further research in wound therapy and IV access devices.

Scheuring, R.

In-FEEP ion beam neutralization with thermionic and field emission cathodes

Charge neutralization of an In-FEEP thruster was demonstrated with three different electron sources by zeroing the floating potential of the thruster and neutralizer system. The three cathodes used in the investigation include a mixed metal thermionic cathode, a carbon nanotube field emission cathode, and a Spindt-type Mo field emission array cathode.

field emission cathodes FEEP electric propulsion

The DS1 hyper-extended mission

The Primary Mission for Deep Space (DS1) was to demonstrate 12 new technologies one of which was the Ion Propulsion System (IPS). After successfully completing its primary mission, DS1 was given a new mission. The objective of this Extended Mission was to fly by the Comet Borrelly. After the successful Borrelly encounter, the ion thruster on DS1 had to be operated for more than 14,000 hours in space. This provided a unique opportunity to investigate the condition of the thruster after long-term operation in space and determine, to the extent possible, if the thruster wear in space is consistent with that observed in long-duration ground tests.

DS1 Deep Space 1 ion propulsion ion thruster

Filed emission cathodes for electrodynamic tethers: identifying compatible cathode materials

Several material combinations were considered as candidates for the electrodynamic tether application in the investigation discussed in this paper. Critical characteristics like work function, resistance, sputter yield and sensitivity to oxidizing environments were considered. The material investigation included, ZrC/Mo, Mo, MgPt, Pt, NbC/Nb, NbNi/Nb, Nb, RuTa/Ta, Ru/Ta and Ta. The results of the measurements suggest that NbC/Nb, NbNi/Nb, and MgPt are the most promising candidates.

electrodynamics tethers cathodes oxidation

An overview of MEMS-based micropropulsion development at JPL

Development of MEMS (Microelectromechanical Systems) micropropulsion at the Jet Propulsion Laboratory (JPL) is reviewed. This includes a vaporizing liquid micro-thruster for microspacecraft attitude control, a micro-ion emgine for microspacecraft primary propulsion or large spacecraft fine attitude control, as well as several valve studies, including a solenoid valve studied in collaboration with Moog Space Products Division, and a piezoelectric micro-valve.

MEMS micropropulsion