Search NASA⌕ Search

Engineering topics

Polyansky, Dmitry E.

Publications and source records attributed to Polyansky, Dmitry E..

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Selective Reduction of Carbon Dioxide in Water Using [M(bpy2+)(CO)3(I)]2+ (M = Mn, Re) Electrocatalysts with Pendent Cations

Manganese(I) carbonyl complexes are promising electrocatalysts for CO2 reduction, yet their application in homogeneous aqueous media remains limited by poor solubility and selectivity. Here, we report water-soluble Mn(I) and Re(I) complexes fac-[M(bpy2+)(CO)3X]2+ (X = I or Cl), featuring bipyridine ligands functionalized with -Ph-CH2-(NMe3)+ cationic ammonium groups that integrate water solubility with secondary-sphere stabilization. In bicarbonate buffer at pH 6.8, the Mn catalyst is completely selective for CO production at a low overpotential (η = 0.3 V), operating by a protonation-first mechanism with observed rates of ~10 s−1. Pulse radiolysis reveals that the one-electron reduced Mn species undergoes dimerization in the absence of CO2 but uniquely reacts competitively with CO2 through an initial pre-equilibrium followed by fast formation of a dinuclear CO2-bridged species (ΔGo = −12.4 kcal mol−1). At a higher 0.6 V over-potential, a faster reduction-first pathway (~100 s−1) is available upon reduction of the metallo-carboxylic acid intermediate, Mn-CO2H2+; however, this regime is functionally limited by the formation of a resistive, noncatalytic film on the electrode surface. Comparison to the analo-gous water-soluble Re catalyst (kobs = 440 s−1, η = 0.6 V) highlights the distinct mechanistic ad-vantages of earth-abundant Mn in low-potential catalysis. These results demonstrate how cati-onic second-sphere design enables selective, homogeneous CO2 reduction in water while reveal-ing competing radical and electrode-mediated processes that govern catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reductive Dynamic and Static Excited State Quenching of a Homoleptic Ruthenium Complex Bearing Aldehyde Groups

A new homoleptic Ru polypyridyl complex bearing two aldehyde groups on each bipyridine ligand, [Ru(dab) 3 ](PF 6 ) 2 , where dab is 4,4′-dicarbaldehyde-2,2′-bipyridine, was synthesized, characterized, and utilized for iodide photo-oxidation studies. In acetonitrile (CH 3 CN) solution, the complex displayed an intense metal-to-ligand charge transfer (MLCT) absorbance maximum at 475 nm (ε = 22,000 M –1 cm –1 ) and an infrared (IR) band at 1712 cm –1 assigned to the pendent aldehyde groups. Visible light excitation in air-saturated solution resulted in room temperature photoluminescence (PL) with a maximum at 675 nm, a quantum yield, ϕ PL = 0.048, and an excited state lifetime, τ ο = 440 ns, from which radiative and nonradiative relaxation rate constants were extracted, k r = 9.1 × 10 4 s –1 and knr = 1.8 × 10 6 s –1 . Pulsed visible light excitation yielded transient UV–vis and IR absorption spectra consistent with an MLCT excited state; relaxation occurred with the maintenance of two isosbestic points in the visible region, and a lifetime that agreed with that measured by time-resolved PL. Cyclic voltammetry studies in a CH 3 CN solution with 0.1 M TBAPF 6 electrolyte revealed a quasi-reversible oxidation, E°(Ru III/II ) = +1.25 V vs. Fc +/0 , and three sequential one-electron reductions at −1.10, −1.25, and −1.54 V vs. Fc +/0 . Here, an excited state reduction potential of E°(Ru *2+/+ ) = +0.89 V vs. Fc +/0 was estimated with the Rehm–Weller expression. Titration of tetrabutylammonium iodide, TBAI, into a CD 3 CN solution of [Ru(dab) 3 ](PF 6 ) 2 resulted in significant shifts in the aldehyde H atom and 3,3′-biypridyl resonances that were analyzed with a 1:1 equilibrium model, from which K eq = 460 M –1 was extracted, increasing to 5800 M –1 when the solvent was changed to acetone-d 6 . Iodide titrations resulted in a significant quenching of the [Ru(dab) 3 ] *2+ lifetime and quantum yield in both CH 3 CN and acetone solvents. In CH 3 CN, the quenching was mainly dynamic and well described by the Stern–Volmer model, from which a quenching rate constant, k q , of 4.5 × 10 10 M –1 s –1 and an equilibrium constant, K eq , of 8.3 × 10 3 M –1 were obtained. In acetone, the static quenching pathway by iodide was greatly enhanced, with a K eq of 1.2 × 10 4 M –1 and a higher k q of 9.2 × 10 10 M –1 s –1 .

Aldehydes↗
DOE OSTI2024

Reduction of CO to Methanol with Recyclable Organic Hydrides

We report the reaction steps for the selective conversion of a transition metal carbonyl complex to a hydroxymethyl complex that releases methanol upon irradiation with visible light have been successfully quantified in acetonitrile solution with dihydrobenzimidazole organic hydride reductants. Dihydrobenzimidazole reductants have been shown to be inactive toward H 2 generation in the presence of a wide range of proton sources and have been regenerated electrochemically or photochemically. Specifically, the reaction of cis-[Ru(bpy) 2 (CO) 2 ] 2+ (bpy = 2,2'-bipyridine) with one equivalent of a dihydrobenzimidazole quantitatively yields a formyl complex, cis-[Ru(bpy) 2 (CO)(CHO)] + , and the corresponding benzimidazolium on a seconds time scale. Kinetic experiments revealed a first-order dependence on the benzimidazole hydride concentration and an unusually large kinetic isotope effect, inconsistent with direct hydride transfer and more likely to occur by an electron transfer-proton-coupled electron transfer (EΤ-PCET) or related mechanism. Further reduction/protonation of cis-[Ru(bpy) 2 (CO)(CHO)] + with two equivalents of the organic hydride yields the hydroxymethyl complex cis-[Ru(bpy) 2 (CO)(CH 2 OH)] + . Visible light excitation of cis-[Ru(bpy) 2 (CO)(CH 2 OH)] + in the presence of excess organic hydride was shown to yield free methanol. Identification and quantification of methanol as the sole CO reduction product was confirmed by 1 H NMR spectroscopy and gas chromatography. The high selectivity and mild reaction conditions suggest a viable approach for methanol production from CO, and from CO 2 through cascade catalysis, with renewable organic hydrides that bear similarities to Nature's NADPH/NADP + .

14 SOLAR ENERGY↗
DOE OSTI2023

Combined Effects of Hemicolligation and Ion Pairing on Reduction Potentials of Biphenyl Radical Cations

Here, formal reduction potentials of highly oxidizing and short-lived radical cations of substituted biphenyls generated by pulse radiolysis in 1,2-dichloroethane (DCE) were measured using a redox equilibrium ladder method. The effect of halide ion–radical interactions on reduction potentials of biphenyls was examined by utilizing the ability of DCE to release Cl – in the vicinity of the radical cation. The Hammett correlation of measured potentials across a range of over 700 mV shows saturation at high Hammett sigma values. This effect has been explained by both ion-pairing and hemicolligation interactions between biphenyl radical cations and Cl – and appears to modulate reduction potentials by as much as 400 mV. This finding offers a convenient way to manipulate the energetics of electron transfer involving organic redox species.

14 SOLAR ENERGY↗
DOE OSTI2023

Lewis Acids and Electron-Withdrawing Ligands Accelerate CO Coordination to Dinuclear Cu I Compounds

A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO 2 reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between CuI and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, K eq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Lastly, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic roles of metal- and ligand-protonated species in hydrogen evolution with [Cp*Rh] complexes

Protonation reactions involving organometallic complexes are ubiquitous in redox chemistry and often result in the generation of reactive metal hydrides. However, some organometallic species supported by η 5 -pentamethylcyclopentadienyl (Cp*) ligands have recently been shown to undergo ligand-centered protonation by direct proton transfer from acids or tautomerization of metal hydrides, resulting in the generation of complexes bearing the uncommon η 4 -pentamethylcyclopentadiene (Cp*H) ligand. Here, time-resolved pulse radiolysis (PR) and stopped-flow spectroscopic studies have been applied to examine the kinetics and atomistic details involved in the elementary electron- and proton-transfer steps leading to complexes ligated by Cp*H, using Cp*Rh(bpy) as a molecular model (where bpy is 2,2′-bipyridyl). Stopped-flow measurements coupled with infrared and UV-visible detection reveal that the sole product of initial protonation of Cp*Rh(bpy) is [Cp*Rh(H)(bpy)] + , an elusive hydride complex that has been spectroscopically and kinetically characterized here. Tautomerization of the hydride leads to the clean formation of [(Cp*H)Rh(bpy)] + . Variable-temperature and isotopic labeling experiments further confirm this assignment, providing experimental activation parameters and mechanistic insight into metal-mediated hydride-to-proton tautomerism. Spectroscopic monitoring of the second proton transfer event reveals that both the hydride and related Cp*H complex can be involved in further reactivity, showing that [(Cp*H)Rh] is not necessarily an off-cycle intermediate, but, instead, depending on the strength of the acid used to drive catalysis, an active participant in hydrogen evolution. Identification of the mechanistic roles of the protonated intermediates in the catalysis studied here could inform design of optimized catalytic systems supported by noninnocent cyclopentadienyl-type ligands.

08 HYDROGEN↗
DOE OSTI2023

Multi-Electron Transfer at H-Terminated p-Si Electrolyte Interfaces: Large Photovoltages under Inversion Conditions

Here, photovoltages for hydrogen terminated p-Si(111) in an acetonitrile electrolyte were quantified with methyl viologen [1,1'-(CH 3 ) 2 -4,4'-bipyridinium](PF 6 ) 2 , abbreviated MV 2+ , and [Ru(bpy) 3 ](PF 6 ) 2 , where bpy is 2,2'-bipyridine, that respectively undergo two and three one-electron transfer reductions. The reduction potentials, E°, of the two MV 2+ reductions occurred at energies within the forbidden bandgap, while the three [Ru(bpy) 3 ] 2+ reductions occurred within the continuum of conduction band states. Bandgap illumination resulted in reduction that were more positive than that measured with a degenerately doped n + -Si demonstrative of a photovoltage, Vph, that increased in the order: MV 2+/+ (260 mV) < MV +/0 (400 mV) < Ru 2+/+ (530 mV) ~ Ru +/0 (540 mV) ~ Ru 0/– (550 mV). Pulsed 532 nm excitation generated electron-hole pairs whose dynamics were nearly constant under depletion conditions and increased markedly as the potential was raised or lowered. A long wavelength absorption feature assigned to conduction band electrons provided additional evidence for the presence of an inversion layer. Collectively, the data reveal that the most optimal photovoltage, as well at the longest electron-hole pair lifetime and the highest surface electron concentration, occur when E° lies energetically within the unfilled conduction band states where an inversion layer is present. The bell-shaped dependence for electron-hole pair recombination with the surface potential was predicted by the time-honored SRH model providing a clear indication that this interface provides access to all four bias conditions, i.e., accumulation, flat band, depletion, and inversion. The implications of these findings for photocatalysis applications and solar energy conversion are discussed.

14 SOLAR ENERGY↗
DOE OSTI2023

A Dicationic fac -Re(bpy)(CO) 3 Cl for CO 2 Electroreduction at a Reduced Overpotential

Here, a dicationic Re bipyridine-type complex, fac-Re(6,6'-(2-((trimethylammonio)-methyl)phenyl)-2,2'-bipyridine)(CO) 3 Cl hexafluorophosphate (1 2+ ), has been synthesized and its electrochemical behavior under Ar and CO 2 has been investigated. The presence of pendent tetra-alkylammonium cations induces an anodic shift in the electrocatalytic potential for CO 2 reduction relative to structurally similar model complexes. The electrochemical mechanisms in anhydrous CH 3 CN and in the presence of weak acids (water or trifluoroethanol) have been analyzed using cyclic voltammetry assisted by infrared spectroelectrochemistry and theoretical calculations. The dication enables catalysis at a diminished potential through coulombic stabilization of the doubly reduced pentacoordinate species, its CO 2 adduct, the hydroxide anion, and the conjugate base formed during acid-assisted C-OH bond cleavage of the metallocarboxylic acid to the metallocarbonyl and H 2 O. The major reduction product is CO, but in the presence of trifluoroethanol, formate is also produced with 14% Faradaic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In Situ Attenuated Total Reflectance Infrared Spectroelectrochemistry (ATR-IR-SEC) for the Characterization of Molecular Redox Processes on Surface-Proximal Doped Silicon ATR Crystal Working Electrodes

In situ mid-infrared spectroscopy is a powerful technique for understanding the mechanism of CO 2 reduction (CO 2 R) catalysts because it enables the direct detection of catalytic intermediates and products. Moreover, spectroelectrochemistry (SEC), the coupling of spectroscopy with electrochemistry, allows spectroscopic changes to be correlated with applied potentials to reveal potential-dependent intermediates that are often relevant to photoelectrochemical reactions. Hybrid photoelectrodes, comprised of a narrow bandgap semiconductor, like silicon (Si), with a covalently-linked molecular catalyst, are a promising platform for sunlight-driven catalysis, but characterization of the catalytic mechanism(s) is challenging under photoelectrochemical conditions, particularly when the catalyst is present in monolayer or less concentrations. Here, we have developed a new strategy to use multiple-reflection attenuated total reflectance IR spectroscopy (ATR-IR) coupled with electrochemistry to characterize catalysts directly integrated with a semiconductor surface under applied potential. We show that by surface-proximal n-type or p-type doping of the top ~100-200 nm of the crystal surface, Si ATR crystals can be used simultaneously as the internal reflection element and semiconductor working electrode for ATR-IR-SEC measurements. The surface-proximal doping strategy yields a quasi-equipotential surface with excellent infrared transparency that would have been compromised by free carrier absorption if the crystal was uniformly doped. This approach permits the catalytically-active functionalized surface to be directly probed without modification and overcomes signal-to-noise limitations of other strategies that use separately deposited working electrodes on Si ATR crystals. Proof-of-concept ATR-IR-SEC spectra were collected during the reduction and oxidation of monolayers of Re- and Ru-based transition metal carbonyl complexes, respectively, verifying the viability of the technique to probe redox processes associated with CO 2 R catalysts on Si electrode surfaces with high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Role of Bimetallic Interactions in the Enhancement of Catalytic CO 2 Reduction by a Macrocyclic Cobalt Catalyst

The use of two metal centers in a CO 2 reduction catalyst that work together synergistically, with similar or complementary functions, can potentially lead to a significant reduction in overpotential, enhance catalytic activity and/or selectivity, and/or enable access to cascade strategies where each metal center catalyzes a different step in the conversion of CO 2 to a fuel. Here, the bimetallic reactivity of two metal centers has been identified as the primary route for the reduction of CO 2 to CO promoted by the macrocycle, [Co(HMD)] 2+ (HMD = 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-4,11-diene), based on the experimental characterization of all major steps of the proposed catalytic cycle using pulse radiolysis time-resolved IR (PR-TRIR) spectroscopy, corroborated by density functional theory (DFT) calculations and IR spectroelectrochemistry (IR-SEC). A bimetallic intermediate is formed in situ from two singly reduced [Co(HMD)] + species bridged by a CO 2 molecule, and the presence of a coordinating species, e.g., formate anion, appears to assist in the formation of such an intermediate. In this work, it has been demonstrated that this reactivity enables access to elementary steps with lower energy requirements, resulting in overall catalysis being kinetically more facile compared to the mononuclear pathway. A two-step approach that combines chemical reduction followed by PR-TRIR has been successfully used for probing the structure and reactivity of reactive intermediates involved in the advanced stages of a catalytic cycle, which are rarely interrogated using experimental techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural and Electronic Influences on Rates of Tertpyridine-Amine Co III -H Formation During Catalytic H 2 Evolution in an Aqueous Environment

In this paper, the differences in catalytic performance for a series of Co hydrogen evolution catalysts with different pentadentate polypyridyl ligands (L), have been rationalized by examining elementary steps of the catalytic cycle using a combination of electrochemical and transient pulse radiolysis (PR) studies in aqueous solution. Solvolysis of the [Co II -Cl] + species results in the formation of [Co II (κ 4 -L)(OH 2 )] 2+ . Further reduction produces [Co I κ 4 -L)(OH 2 )] + , which undergoes a rate-limiting structural rearrangement to [Co I (κ 5 -L)] + before being protonated to form [Co III -H] 2+ . The rate of [Co III -H] 2+ formation is similar for all complexes in the series. Using E 1/2 values of various Co species and pKa values of [Co III -H] 2+ estimated from PR experiments, we found that while the protonation of [Co III -H] 2+ is unfavorable, [CoII-H]+ reacts with protons to produce H 2 . The catalytic activity for H 2 evolution tracks the hydricity of the [Co II -H] + intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photochemical CO 2 Reduction Using Rhenium(I) Tricarbonyl Complexes with Bipyridyl-Type Ligands with and without Second Coordination Sphere Effects

In this study, the effect of phenyl, phenol, aniline, amino, and CF 3 substituents of the 2,2'-bipyridine ligand in fac-ReCl(L)(CO) 3 (L=2,2'-bipyridine derivative) catalysts on photochemical CO 2 reduction in dimethylacetamide is examined, in order to understand the structure-function relationships and to compare the catalytic activities with the previously published electrochemical results. All complexes including ReCl(bpy)(CO) 3 have similar excited-state lifetimes and emission spectra, but complex 1 with the Ph-NH 2 moiety exhibits a significantly larger molar absorption coefficient for its metal-to-ligand charge transfer (MLCT) band. All complexes we tested produce CO with only a negligible amount of H 2 and formate in self-sensitized systems in the presence of triethanolamine (TEOA) and in some cases, BIH (1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]-imidazole). The presence of the Ph-NH 2 moiety (complex 1) has a beneficial effect on both electrochemical and photochemical activity, allowing a turnover number (TON) of 32 and 120 for photochemical CO production (without and with BIH, respectively). In the case of the Ph-OH group in the second coordination sphere (complexes 4 and 6), these complexes are active for photochemical CO 2 reduction, despite the formation of a stable 6-coordinate Re-OPh intermediate via reductive deprotonation as previously observed under electrochemical conditions. Overall, BIH accelerates the rate of formation of the one-electron reduced species (OERS) of the Re catalysts and allows higher turnover frequency (TOF) and TON for CO formation. The X-ray structures of complexes 1 and 4 were determined to have distorted octahedral Re centres, and show π-π stacking interactions with neighboring molecules as well as intramolecular hydrogen bonds to the internal chloride ligands. The unusually high absorptivity of the MLCT absorption of complex 1 has been explained by TD-DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Unexpected Roles of Triethanolamine in the Photochemical Reduction of CO 2 to Formate by Ruthenium Complexes

We show a series of 4,4'-dimethyl-2,2'-bipyridyl ruthenium complexes with carbonyl ligands were prepared and studied using a combination of electrochemical and spectroscopic methods with infrared detection to provide structural information on reaction intermediates in the photochemical reduction of CO 2 to formate in acetonitrile (CH 3 CN). An unsaturated 5-coordinate intermediate was characterized, and the hydride-transfer step to CO 2 from a singly reduced metal-hydride complex was observed with kinetic resolution. While triethanolamine (TEOA) was expected to act as a proton acceptor to ensure the sacrificial behavior of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as an electron donor, time-resolved infrared measurements revealed that about 90% of the photogenerated one-electron reduced complexes undergo unproductive back electron transfer. Furthermore, TEOA showed the ability to capture CO 2 from CH 3 CN solutions to form a zwitterionic alkylcarbonate adduct and was actively engaged in key catalytic steps such as metal-hydride formation, hydride transfer to CO 2 to form the bound formate intermediate, and dissociation of formate ion product. Collectively, the data provide an overview of the transient intermediates of Ru(II) carbonyl complexes and emphasize the importance of considering the participation of TEOA when investigating and proposing catalytic pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗