Search NASA⌕ Search

Engineering topics

Posada, Luisa F.

Publications and source records attributed to Posada, Luisa F..

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

CO 2 hydrogenation over rhodium cluster catalyst nucleated within a manganese oxide framework

Rhodium-based manganese oxide frameworks were explored as a prototype for carbon dioxide reactive capture and conversion. Three-dimensional frameworks of MnOx were utilized as support structures to isolate Rh metal centers. V, Na, and Zn were introduced as counterions to stabilize the structure and for their beneficial effect as promoters. Here, with this multicomponent catalyst, Rh active centers with MnOxs and varied counterions, we were able to selectively tune the catalytic performance of the material via the choice of counterion and structure of the host material. With cryptomelane-type tunnel manganese oxides octahedral molecular sieve (OMS2), we found that Rh-V-OMS2 was highly stable even after 48 hours on stream with a reaction rate of around 1.5x10 -4 mol CO 2 /g Rh /s, surpassing the net reactivity of other initially more active combinations. Furthermore, during CO 2 hydrogenation, in situ XAFS showed that single Rh atoms nucleated into nanoparticles/ sub-nanometer clusters with a coordination number of 5.5 or less. Our finding of the correlation between the reaction rate and particle size offers the potential for enhanced control over the reaction rate by tuning particle size. Our activity study with control experiments demonstrates that the activities of the catalysts are proved due to the unique metal support interaction offered by the Rh-X-MnO.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Stoichiometric metal nitration based novel green synthesis of mesoporous metal oxides and their enhanced heterogeneity

Here, in this work, a general and novel method for the green synthesis of mesoporous metal oxides via stoichiometric metal nitration has been demonstrated. Pluronic surfactants and their effect on synthesis procedures in terms of surface area have been experimentally studied in detail. Contrary to the traditional synthesis procedure, water has been utilized as the solvent and in several cases, such as tin oxide, manganese oxide, aluminum oxide, antimony oxide, zinc oxide, cobalt oxide, copper oxide, yttrium oxide, lanthanum oxide, and silver either the highest or comparable surface areas have been successfully synthesized. Through XRD, and TEM, all materials were observed to be crystalline except silver and magnesium oxide. SEM shows that with an increase in surfactant molar mass agglomeration decreases. Ammonia chemisorption on acidic materials gives quantitative amounts of ammonia chemical bonding with catalysts, whereas carbon dioxide chemisorption gives a quantitative value of CO 2 chemical binding with basic sites. As high as 1901.8 μmol/g and 994.6 μmol/g ammonia chemisorption values for oxides of vanadium and tin were achieved. Amphoteric materials give both acidic and basic enhanced adsorption. Finally, all synthesized materials are studied under organic catalytic transformations. Benzyl bromide is theoretically more active compared with benzylamine and benzyl alcohol which was also experimentally shown through the conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Syntheses of gold supported on metal oxides and their application in organic transformations

Herein, we report a general and straightforward synthesis method for gold supported on mesoporous and microporous metal oxides. Supported materials, in general, show higher crystallinity compare to unsupported systems as verified through powder X-ray diffraction (XRD). Also, through XRD, most of the metal is observed to be in its oxide form, whereas the gold support was found to be in its metallic state, which has been further confirmed from TEM. In terms of surface area, the catalyst was not found to follow any trend. Morphology wise, there are no changes observed after doping except in few cases. Combined results from XRD, X-ray fluorescence spectroscopy, Auger, and X-ray photoelectron spectroscopy suggest that gold is mainly in the bulk and very little (0.04% in case of gold doped calcium oxide) or non (in case of gold doped mixed manganese-cerium oxide) on the surface. The presence of Au (0) 4f peaks in XPS further confirms the metallic state of the gold. Oxides of indium, magnesium and calcium have been studied for the organic transformation reactions. An enhancement in activity and product selectivity was observed in the case of the gold supported catalysts. Indium serves as a great catalyst for C–C coupling and electrophilic aromatic substitution reactions and gives >99% conversion. Interestingly, 88% selectivity for C–C coupling and >99% selectivity for aromatic substitution have been achieved at 100 °C and room temperature respectively. Magnesium and calcium give Knoevenagel condensation products. At room temperature with very low catalyst loading, >99% conversion and selectivity were observed for the Knoevenagel reaction with as high as 35.30 TOF. Finally, a mechanism for the C–C coupling reaction has been proposed based on these results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Partial oxidation of isobutylene using Ni TiO x

In this work, we report an aerobic partical oxidation of isobutylene into isoprene, acetone, and p-xylene using a mesoporous Ni TiO x catalytic material. In this work, two catalysts were found to synthesize two of these three valuable products with high selectivity, with p-xylene being synthesized with a selectivity of 46.0% and isoprene being synthesized with a selectivity of 64.7%, with overall conversions of isobutylene being 34.0% and 11.9% respectively. These reactions were done at relatively low temperatures. (300°C or below) and are conducted at flow rates of 10 sccm oxygen and isobutylene. The nickel titania catalysts were studied extensively using various characterization methodologies such as TEM, Raman, XRD, and XRF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗