Search NASA⌕ Search

Engineering topics

Post, Brian

Publications and source records attributed to Post, Brian.

At least 55 records · Page 3

Opportunities for Lighter Weight and Lower Total Cost Component Manufacturing

This paper describes how a relatively new manufacturing technology known as additive manufacturing (AM) can enable creation of more mass efficient components when compared to those created by conventional or subtractive manufacturing (SM). An important element in the use of AM is re-thinking the design approach when completely new shape possibilities are enabled. Similarly, creative use of AM also can enable significant part count reduction. In order to make the case for the potential of AM, the more common AM processes are described and illustrated. As with any new technology, there come challenges during the reduction to practice phase of AM. Some of these challenges have been addressed and solved. Others are a work in progress and the approach to possible solutions to some of these is described.

Williams, James C.↗

On-Site Manufacture of Large Cement Structures

ORNL worked with GE Renewable Energy to develop additive manufacturing capabilities that enable the manufacture of large cement structures on-site. This project resulted in the testing and definition of the materials and deposition functions necessary for an on-site additive manufacturing system. Test articles were manufactured using a medium-scale prototype system, and mechanical testing of the samples was performed.

36 MATERIALS SCIENCE↗

MELT POOL MONITORING FOR CONTROL AND DATA ANALYTICS IN LARGE-SCALE METAL ADDITIVE MANUFACTURING

Laser-wire based Directed Energy Deposition (DED) processes are being developed at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility, in collaboration with GKN Aerospace, for large volume metal additive manufacturing of metallic structures. The technology has the potential to deliver reduced costs and lead times when compared to conventional methods of manufacturing in several industries. While complex structures are being produced with relatively high deposition rates and at near-net shape, issues persist with achieving consistent geometric accuracy and thermal stability. A significant research effort is focused on developing coordinated, multi-modal sensing and control for addressing these issues. An introduction to this large-volume metal process will be provided, followed by investigations into real-time thermal monitoring capabilities that support control and data analytics frameworks. Studies focused on melt pool monitoring via infrared thermography, thermal and geometric effects on melt pool size measurement, and interactions between process variables and thermal monitoring metrics are presented.

Gibson, Brian↗

SkyBAAM Large-Scale Fieldable Deposition Platform System Architecture

Oak Ridge National Laboratory (ORNL) is currently developing a concrete deposition system for infrastructure-scale printed objects. This system, called SkyBAAM, uses a cable driven motion platform to manipulate the print head. This work focuses on the general aspects of the system architecture, including arrangement of the cable driven platform, general high-level control methodology, and system accuracy, along with concrete deposition methods. Results and demonstration prints will be shown.

Chesser, Phillip↗

In-Situ Thermal Imaging for Single Layer Build Time Alteration in Large-Scale Polymer Additive Manufacturing

Ideally, objects are constructed as quickly as possible; however, short build times for a layer can present an issue. Short layer build times do not provide enough time for the material to cool sufficiently. As a result, an object cannot support its own weight nor deal with overhanging features. Additionally, the generation of support structures may be impractical either due to geometry or, in the case of large-scale polymer additive manufacturing, due to being difficult to remove. To address these issues, researchers at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility investigated the use of a thermal camera mounted to a gantry to collect data on an object under construction. This data provided feedback for an in-situ control system to adjust layer build times. Adjustments were made in the form of additional waiting to allow the material to cool to specific thermal thresholds. This additional cooling time allowed the construction of objects with low layer build times or overhanging features that would have otherwise failed.

Borish, Michael↗

Extrusion control for high quality printing on Big Area Additive Manufacturing (BAAM) systems

Big Area Additive Manufacturing (BAAM) is a large format additive manufacturing (AM) process. The size scale has enabled many new applications for AM. However, at this scale, lack of high print resolution and extruder flowrate control lead to potentially significant geometric deviations in the printed part. This paper examines strategies to improve geometric quality in BAAM parts. Multi-resolution printing, extrusion diversion, and feedforward extruder control are examined herein. Furthermore, these methods were all found to be effective in mitigating phenomena detrimental to geometric part quality on the BAAM process.

36 MATERIALS SCIENCE↗

Introduction to the design rules for Metal Big Area Additive Manufacturing

Wire feed metal additive manufacturing offers advantages, such as large build volumes and high build rates, over powder bed and blown powder techniques, but it has its own disadvantages, i.e., lower feature resolution and bead morphology control issues. A new wire feed metal additive manufacturing process called Metal Big Area Additive Manufacturing (mBAAM) uses a Gas Metal Arc Weld system on an articulated robot arm to increase build volume and deposition rate in comparison to powder bed techniques. The high deposition rate implies a low-resolution process; therefore, parts designed for mBAAM must incorporate the use of machining to achieve certain features. Here, this paper presents an introduction to how design rules, such as overhang constraint, large weld bead thickness, and support structure, for mBAAM interact in the context of an excavator arm case study, which was designed using topology optimization.

42 ENGINEERING↗

Increasing Interlaminar Strength in Large Scale Additive Manufacturing

Interlaminar strength of extrusion-based additively manufactured parts is known to be weaker than the strength seen in the printed directions (X and Y). With Big Area Additive Manufacturing (BAAM), large parts lead to long layer times that are prone to splitting, sometimes referred to as delamination, between the layers. Fiber filled materials, such as carbon fiber reinforced ABS, are used to counter-act the effects of thermal expansion, but the fibers stay in-plane meaning that no fibers span from layer to layer, which helps counteract the weak interlaminar strength that causes splitting. A solution to this is a patent pending approach known as “z-pinning”. The process involves strategically positioning voids across multiple layers that will be backfilled with hot extrudate. This paper will explore the benefits and results of using “z-pinning” in large scale additive manufacturing.

Roschli, Alex↗

Z-Pinning Approach for Reducing Mechanical Anisotropy of 3D Printed Parts

The mechanical strength of extrusion-based printed parts is often greatly reduced (25-50%) in the build direction (z-direction) compared to the in-plane strength due to poor bonding between successively deposited layers. This effect can be magnified (75-90% difference) when depositing fiber-reinforced materials or larger print areas with long layer times. Therefore, a patent-pending approach has been developed that deposits material into intentionally aligned voids in the zdirection, allowing continuous material to span multiple layers. The “z-pinning” approach can be applied to several concepts for improving the interlaminar strength of extrusion-based 3D printed parts as well as techniques for applying the technology across a broad spectrum of deposition platforms and material systems. Initial experimental results demonstrate a significant improvement (>3x) in mechanical strength and (>8x) toughness for fiber reinforced components.

Duty, Chad↗

Graded Infill Structure of Wind Turbine Blade Accounting for Internal Stress in Big Area Additive Manufacturing

In additively manufactured (AM) components, infill structure significantly affects the mechanical performance of the final printed part. However, mechanical stress induced by operation loads has been so far neglected for infill patterning. Most slicers currently available in the market provide infill patterns that are uniform in shape and size regardless of the operational loading. We develop a design approach for infill patterns that accounts for the induced stress. This approach differs from topology optimization as it focuses on the porous infill, which allows the external shape of the printed part to remain intact. The proposed approach uses a computational stress analysis to control the distribution of the local density of the infill pattern. We have applied the approach to a wind turbine blade core with infill densities optimized based on the structural loads. The blade core is fabricated in our big area additive manufacturing (BAAM) system. To ensure less warpage and better inter-layer bonding, fast layer deposition is critical in BAAM system. We have optimized the tool path sequences to minimize the deposition time via the solution to the Chinese Postman Problem (CPP). For the application of wind turbine infill, the deposition from the CPP method is twice faster than the deposition from conventional slicing.

Kim, Pum↗

Large-scale additive manufacturing with reactive polymers

The focus on large-scale polymer Additive Manufacturing (AM) has previously been on thermoplastic materials. However, Magnum Venus Products (MVP) along with researchers at Oak Ridge National Laboratory’s (ORNL) Manufacturing Demonstration Facility (MDF) are introducing a unique AM system capable of depositing reactive polymers in a large format. The system’s footprint is 4.88 m (16ft) x 2.44 m (8ft). The benefits of printing with reactive polymers rather than thermoplastic polymers include reduced dependence on temperature control of the process, chemical reactions across the bead-to-bead interfaces, and increased toolpath flexibility that is currently unattainable with existing large-scale systems. This flexible AM system can be used with a variety of polymers, and pre-processin and post-processing operations will be performed outside of the printer on a removable print bed. Examples of printed structures and machine capabilities leading to improved productivity of AM equipment are presented herein.

Lindahl, John↗

The influence of dynamic rheological properties on carbon fiber-reinforced polyetherimide for large-scale extrusion-based additive manufacturing

Printing high-performance thermoplastics on large scale extrusion-based additive manufacturing platforms requires stability over a range of processing conditions. Yet, research on the melt dynamics and processing conditions of these thermoplastics in big area additive manufacturing (BAAM) are limited. This report characterizes the dynamic rheological behavior of polyetherimide (PEI), a high-performance thermoplastic, as well as carbon fiber (CF)-reinforced PEI composites as a BAAM feedstock material. The viscoelastic properties, such as the storage and loss moduli and complex viscosity, are investigated in relation to the BAAM extrusion process. The results show that CF-PEI composites behave like a viscous liquid during BAAM extrusion. The addition of CF to PEI enhances the shear thinning effect and significantly increases the complex viscosity (2.5× increase for 20% CF, and 3× for 30% CF). The increased viscosity increases the torque on the extruder, which may be alleviated by increasing the material processing temperature.

36 MATERIALS SCIENCE↗

Fieldable Platform for Large-Scale Deposition of Concrete Structures

Oak Ridge National Laboratory’s Manufacturing Demonstration Facility is developing a novel, large-scale additive manufacturing, or 3D printing, system. The Sky Big Area Additive Manufacturing (SkyBAAM) system will ultimately be a fieldable concrete deposition machine with pick and place abilities that will allow for full-scale, automated construction of buildings. The system will be implemented with existing construction equipment meaning conventional cranes will be used to suspend the printhead. SkyBAAM will be cable-driven by four base stations and suspended from a single crane. The elimination of a gantry system, found commonly in large-scale additive manufacturing systems, will enable SkyBAAM to be quickly set up with minimal site preparation. The medium-scale version of SkyBAAM is currently in development. The system design, cable stiffness analysis, and tactics for freezing rotational degrees-of-freedom (DOF), detailed in this paper, will provide a basis for the final, large-scale version of the SkyBAAM system.

Chesser, Phillip↗

Precast Concrete Molds Fabricated with Big Area Additive Manufacturing

The traditional process of making precast concrete molds requires significant manual labor. The molds are made using hardwood, cost tens of thousands of dollars, and take weeks to build. Once built, a mold will last 5-10 pulls before becoming too heavily degraded to continue use. With additive manufacturing, the same mold can be built in eight hours, post-machined in eight hours, costs about $9000, and is project to last nearly 200 pulls. Oak Ridge National Laboratory has been working with Big Area Additive Manufacturing (BAAM) to fabricate concrete molds for a new high-rise apartment complex in New York. The molded pieces will form structural window supports for the hundreds of windows in building façade. The magnitude of window molds is where additive manufacturing can shine when producing the geometry. This paper will discuss the methods and findings of using BAAM to replace conventional precast concrete pattern making.

Roschli, Alex↗

Pick and Place Robotic Actuator for Big Area Additive Manufacturing

Oak Ridge National Laboratory’s Manufacturing Demonstration Facility has created a system that works in tandem with an existing large-scale additive manufacturing (AM) system to ‘pick and place’ custom components into a part as it is printed. Large-scale AM leaves a layered surface finish and is typically post-processed through 5-axis CNC machining. Each surface must be accurately recorded into a laser tracking system. This process can be simplified with the use of fiducials, which are small location indicators placed on the surface of a part. Additionally, the ability to monitor an AM tool via wireless sensors is advantageous to gauge part health as it is fabricated and later used. The ‘pick and place’ system allows thermocouples, fiducials, and other sensors to be accurately placed throughout the tool as it is fabricated. This solution has the potential to reduce time, labor, and cost associated with fabricating, post-processing, and using AM parts.

Boulger, Alex↗

Using Post-tensioning in Large Scale Additive Parts for Load Bearing Structures

One of the perennial problems with additive manufacturing (AM) is the lack of inter-laminar bond strength between the layers, also known as z-strength. This can make the use of AM fabricated parts in load bearing applications problematic. This problem can be solved in some applications with post-tensioning. The use of post-tensioning in structures can be used to ensure that layer interfaces only see compressive stresses. This method is commonly used to strengthen concrete structures since concrete is weak in tension while strong in compression. This paper explores the successful application of post-tensioning to improve z-strength of large structures made with Big Area Additive Manufacturing (BAAM) where loads are significant. Theory and examples are presented herein.

Chesser, Phillip↗

Additive Manufacturing for Highly Efficient Window Inserts

ORNL partnered with the Mackinac Technology Company to demonstrate how additive manufacturing can be used to create highly energy efficient window inserts for retrofit in pre-existing buildings. Many early iterations of the window inserts were fabricated using carbon fiber reinforced thermoplastics and polycarbonate films as a stand in for the low-e coated films produced by the Mackinac Technology Company. After demonstration of the proof of concept, i.e. custom window inserts with tensioned film, the materials used for the manufacture of the frames was more closely examined. Hollow particle-filled syntactic foam and low-density polymer composites formed by expandable microspheres were explored as the materials used to additively manufacture the frames of the inserts. It was concluded that low-cost retrofit window inserts in custom sizes could be easily fabricated using large scale additive manufacturing. Furthermore, the syntactic and expanded foams developed and tested satisfy the mechanical performance requirements for the application.

36 MATERIALS SCIENCE↗