Search NASA⌕ Search

Engineering topics

Powell, Cedric J.

Publications and source records attributed to Powell, Cedric J..

Proliferation of Faulty Materials Data Analysis in the Literature

As a group of subject matter experts in X-ray photoelectron spectroscopy (XPS), we write this letter to raise awareness of the epidemic of poor and incorrect materials data analysis in the Literature. This is a chronic and growing problem with very undesirable consequences. This issue may contribute to what has been identified as a “reproducibility crisis”1,2 that was the subject of a recent U.S. National Academies study. We are using XPS as one example of what we observe to be a systemic issue.

36 MATERIALS SCIENCE↗

Practical guides for x-ray photoelectron spectroscopy: First steps in planning, conducting, and reporting XPS measurements

Over the past three decade the use of XPS in research and publications has grown to make XPS the most widely used surface analysis method. Associated with the increased use there is an increase in new or inexperienced users along with a increase in erroneous and misapplications of the method. This article is the first in a series of guides and tutorials assembled by a committee of experienced practitioners intended to assist inexperienced users by sharing information about good practices in the use of XPS. This first guide identifies some sources of information for learning how to conduct XPS studies and examines the types of questions to be asked when determining if XPS is an appropriate technique to provide the needed or desired information. Many of the topics/questions addressed in this article apply to the other surface analysis techniques as well.

47 OTHER INSTRUMENTATION↗

Use of the Bethe equation for inner-shell ionization by electron impact

We analyzed calculated cross sections for K-, L-, and M-shell ionization by electron impact to determine the energy ranges over which these cross sections are consistent with the Bethe equation for inner-shell ionization. Our analysis was performed with K-shell ionization cross sections for 26 elements, with L-shell ionization cross sections for seven elements, L{sub 3}-subshell ionization cross sections for Xe, and M-shell ionization cross sections for three elements. The validity (or otherwise) of the Bethe equation could be checked with Fano plots based on a linearized form of the Bethe equation. Our Fano plots, which display theoretical cross sections and available measured cross sections, reveal two linear regions as predicted by de Heer and Inokuti [in Electron Impact Ionization, edited by T. D. Märk and G. H. Dunn, (Springer-Verlag, Vienna, 1985), Chap. 7, pp. 232–276]. For each region, we made linear fits and determined values of the two element-specific Bethe parameters. We found systematic variations of these parameters with atomic number for both the low- and the high-energy linear regions of the Fano plots. We also determined the energy ranges over which the Bethe equation can be used.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantitative interpretation of molecular dynamics simulations for X-ray photoelectron spectroscopy of aqueous solutions

Over the past decade, energy-dependent ambient pressure X-ray photoelectron spectroscopy (XPS) has emerged as a powerful analytical probe of the ion spatial distributions at the vapor (vacuum)-aqueous electrolyte interface. These experiments are often paired with complementary molecular dynamics (MD) simulations in an attempt to provide a complete description of the liquid interface. There is, however, no systematic protocol that permits a straightforward comparison of the two sets of results. XPS is an integrated technique that averages signals from multiple layers in a solution even at the lowest photoelectron kinetic energies routinely employed, whereas MD simulations provide a microscopic layer-by-layer description of the solution composition near the interface. Here, we use the National Institute of Standards and Technology database for the Simulation of Electron Spectra for Surface Analysis (SESSA) to quantitatively interpret atom-density profiles from MD simulations for XPS signal intensities using sodium and potassium iodide solutions as examples. We show that electron inelastic mean free paths calculated from a semi-empirical formula depend strongly on solution composition, varying by up to 30% between pure water and concentrated NaI. The XPS signal thus arises from different information depths in different solutions for a fixed photoelectron kinetic energy. XPS signal intensities are calculated using SESSA as a function of photoelectron kinetic energy (probe depth) and compared with a widely employed ad hoc method. SESSA simulations illustrate the importance of accounting for elastic-scattering events at low photoelectron kinetic energies (<300 eV) where the ad hoc method systematically underestimates the preferential enhancement of anions over cations. Finally, some technical aspects of applying SESSA to liquid interfaces are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

John Grant and the multifaceted nature of true professionalism: Personal perspective

Consideration of the elements that contribute to professional and scientific impact is relevant in a volume honoring John Grant for two reasons. First, John has contributed in many ways to both advancing the methodology and the practical application of surface-analytical tools to understanding surfaces and interfaces of technological importance. The second reason is a little more complex. In an era when there is an effort to quantify contributions in various ways (e.g., citations, H-index, number of publications) and when social media seems, at least anecdotally, to lead a younger generation of scientists to be less involved in traditional professional activities, it is appropriate to examine the nature of the activities that make a lasting contribution to the advancement of science and technology and the professional community that makes progress possible. The multifaceted nature of John’s professional activities provides an appropriate background for exploring the nature of professionalism. With no reservations one can say that the foundation of professionalism is rooted in a scientist’s expertise in some area of research or practice. This expertise might be measured in numerous ways depending upon the field and could include numbers of publications, citations, patents, problems solved, research support obtained, or students produced. These “products” may or may not be readily visible to the community at large. Chuck Wagner – a pioneer in XPS, developer of an empirical set of XPS sensitivity factors and the modified Auger-parameter plot, and winner of the AVS Nerken Award in 1989 – observed that he could not publish or talk about 90% of the work he had done when working for Shell Oil. However, based on XPS capability developments that he could publish, he had a major impact on the development and application of XPS. To some degree John Grant’s research fits this model as well. Much of his early work at the Air Force Materials Research Laboratory was directed at solving materials problems and this important and often ground-breaking work was not published. However, a great deal of creativity and development was required to enable surface-sensitive tools such as AES and XPS to become useful for solving critical problems, and this work could be published.

Baer, Donald R.↗

Interpretation of nanoparticle X-ray photoelectron intensities

X-ray photoelectron (XPS) intensities have been simulated for spherical core-shell nanoparticles (NPs) in different geometrical arrangements in order to investigate the validity of commonly made assumptions for the interpretation of XPS NP intensities. The single-sphere approximation is valid for a powder sample when all spatial coordinates of the NP positions are uncorrelated. Correlations along either the depth coordinate or the lateral coordinates lead to features in the angular distribution that provide information on these correlations. The XPS intensity is proportional to the surface-to-volume ratio of nanoparticles but only for NP sizes exceeding the inelastic mean free path of the photoelectrons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cross Sections for Inner-Shell Ionization by Electron Impact

An analysis is presented of measured and calculated cross sections for inner-shell ionization by electron impact. We describe the essentials of classical and semiclassical models and of quantum approximations for computing ionization cross sections. The emphasis is on the recent formulation of the distorted-wave Born approximation by Bote and Salvat [Phys. Rev. A 77, 042701 (2008)] that has been used to generate an extensive database of cross sections for the ionization of the K shell and the L and M subshells of all elements from hydrogen to einsteinium (Z = 1 to Z = 99) by electrons and positrons with kinetic energies up to 1 GeV. We describe a systematic method for evaluating cross sections for emission of x rays and Auger electrons based on atomic transition probabilities from the Evaluated Atomic Data Library of Perkins et al. [Lawrence Livermore National Laboratory, UCRL-ID-50400, 1991]. We made an extensive comparison of measured K-shell, L-subshell, and M-subshell ionization cross sections and of Lα x-ray production cross sections with the corresponding calculated cross sections. We identified elements for which there were at least three (for K shells) or two (for L and M subshells) mutually consistent sets of cross-section measurements and for which the cross sections varied with energy as expected by theory. The overall average root-mean-square deviation between the measured and calculated cross sections was 10.9% and the overall average deviation was −2.5%. This degree of agreement between measured and calculated ionization and x-ray production cross sections was considered to be very satisfactory given the difficulties of these measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗