Search NASA⌕ Search

Engineering topics

Powers, Jeffrey J.

Publications and source records attributed to Powers, Jeffrey J..

At least 19 records

Sensitivity and uncertainty of the IFR-1 BISON benchmark

The fuel performance code BISON is being used to evaluate metallic fuel for a new fast-spectrum test reactor called the Versatile Test Reactor, which is being considered for adoption by the US Department of Energy. To quantify the accuracy of BISON predictions, researchers at Oak Ridge National Laboratory have been developing a series of benchmarks based on legacy metallic fuel experiments. As part of this effort, the sensitivity of BISON predictions to variations in model inputs and the uncertainties associated with BISON predictions must be established. This paper summarizes efforts to perform a comprehensive sensitivity analysis (SA) and uncertainty quantification (UQ) on a benchmark based on the IFR-1 experiment.For the SA, at least one input was chosen from every BISON model and physics module used in the benchmark. The inputs were varied individually in a series of BISON simulations. Here, the resulting variations in benchmark predictions were normalized to calculate sensitivities. These sensitivities were then used to inform input selections for the UQ.The UQ was performed using the Monte Carlo UQ method. A literature review was conducted to estimate uncertainty distributions for the selected inputs, and values were sampled randomly from each distribution in a series of BISON simulations. Variations in the benchmark predictions were used to estimate uncertainty distributions and confidence intervals. It was found that nearly 100% of the benchmark predictions matched the corresponding legacy values within the confidence intervals. However, this is at least partially because the confidence intervals associated with benchmark predictions were wide. The uncertainty contributions of assumptions in the benchmark, experimental uncertainties, and BISON models were quantified. Some analysis was performed to identify inputs that contributed to the uncertainties. Finally, recommendations are made for future benchmark and future BISON development.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sensitivity and Uncertainty of the IFR-1 BISON Benchmark

The fuel performance code BISON is being used to evaluate metallic fuel for a new fast-spectrum test reactor called the Versatile Test Reactor, which is being considered by the US Department of Energy. To quantify the accuracy of BISON predictions, researchers at Oak Ridge National Laboratory have been developing a series of benchmarks based on legacy metallic fuel experiments. As part of this effort, the sensitivity of BISON predictions to variations in model inputs and the uncertainties associated with BISON predictions must be established. This report summarizes efforts to perform a comprehensive sensitivity analysis (SA) and uncertainty quantification (UQ) on a benchmark based on the IFR-1 experiment. For the SA, at least one input was chosen from every BISON model and physics module used in the benchmark. The inputs were varied individually in a series of BISON simulations. The resulting variations in benchmark predictions were normalized to calculate sensitivities. The strongest sensitivities were identified and used to inform input selections for the UQ. The UQ was performed using the Monte Carlo UQ method. A literature review was conducted to estimate uncertainty distributions for the selected inputs, and values were sampled randomly from each distribution in a series of BISON simulations. Variations in the benchmark predictions were used to estimate uncertainty distributions and confidence intervals. It was found that nearly 100% of benchmark predictions matched the corresponding legacy values within the confidence intervals. However, this is at least partially because of the wide confidence intervals associated with the benchmark predictions. The uncertainty contributions of assumptions in the benchmark, experimental uncertainties, and BISON models were quantified. Some analysis was performed to identify inputs that contributed to the uncertainties. Finally, recommendations are made for future benchmark development and future BISON development.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

25-Pin metallic fuel performance benchmark case based on the EBR-II X430 experiments series

A metallic fuel benchmark case was developed for the fuel performance code BISON based on 25 uranium-zirconium and uranium-plutonium-zirconium pins of the Experimental Breeder Reactor II X430 experiment series. Results of the benchmarks were compared with measurements and calculations made at the time of the experiment as well as subsequent measurements reported in 2019. The comparisons were used to quantify the accuracy of the BISON predictions and to identify patterns in the BISON differences.BISON predicted burnup, plenum pressure, and fission gas release fractions accurately. BISON temperature predictions were somewhat cooler than the temperatures determined at the time of the experiment but appeared to be reasonably accurate considering uncertainties in the legacy temperature calculations, uncertainties in the legacy linear heat rate calculations, and the high sensitivities of the BISON-predicted temperatures to BISON inputs. Fuel axial elongation predictions had errors correlated to fuel composition; BISON tended to underpredict the elongation of binary fuels and overpredict the elongation of ternary fuels. BISON cladding radial dilation predictions were also significantly lower than legacy PIE measurements.Recommendations were made to improve the BISON fuel gaseous swelling model to account for fuel composition, to add additional capabilities to the coolant channel temperature model to ease benchmark development, and to continue developing benchmark cases based on a wide range of experiments in several reactors. Once a wide array of benchmarks is developed, an attempt can be made to enhance or calibrate BISON models to improve the cladding dilation predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Streamlining the Coupling of BISON and Dakota Through the NEAMS Workbench

Metallic nuclear fuels for use in advanced reactors are an active area of research and development. Robust, accurate metallic fuel performance models are necessary for the design, analysis, and licensing of such reactors. However, metallic fuel performance models require additional development; they are not as mature as uranium dioxide fuel performance models. To support further metallic fuel development, Oak Ridge National Laboratory and the University of Florida have streamlined the coupling of the BISON fuel performance code with Design Analysis Kit for Optimization and Terascale Applications (Dakota) statistical analysis tool through the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Workbench. This work included performing three different sensitivity analyses on metallic nuclear fuel models in BISON. The analyses examined were a general model of the IFR-1 experiment, the X430 experiment T654 pin, and the X430 experiment T651 pin. The results suggest that BISON and Dakota can be integrated through NEAMS Workbench to perform sensitivity and uncertainty analyses and visualize the results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Metallic Fuel Performance Code Requirements for the Versatile Test Reactor Project

Metallic nuclear fuels have been proposed for use in several emerging nuclear reactor designs, and a number of codes have been developed to model these fuels and assess their performance. Qualification of these metallic nuclear fuels will ultimately require monitored irradiation of lead test assemblies, but the use of fuel performance codes can reduce the uncertainty associated with these efforts by quantifying uncertainties and estimating margins to failure ahead of time. In this work, metallic fuel performance code requirements are defined for the Versatile Test Reactor (VTR) project using input from the Experimental Breeder Reactor II functional requirements, operational requirements, and design criteria. This work focuses on the thermomechanical responses and irradiation behaviors of metallic fuel elements that are representative of the proposed VTR driver fuel design concepts. As such, many of the code requirements and physics/modeling discussions in this work are expected to be broadly applicable to metallic fuel applications outside of the VTR project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a U-19Pu-10Zr fuel performance benchmark case based on the IFR-1 experiment

Metallic nuclear fuels are subject to research and development for use in advanced reactors. Robust, accurate metallic fuel performance models are important for the design, safety analysis, and licensing of these reactors. However, metallic fuel performance models require additional development; they are not as mature as UO 2 fuel performance models. A benchmark case based on the IFR-1 experiment was developed to better gauge the accuracy of existing models, identify models for high-priority development, and potentially quantify any future improvements made by further model development.This work collected publicly available information on the IFR-1 experiment and used it to develop the benchmark case. Fuel behavior during the IFR-1 irradiation was simulated by using the fuel performance code BISON, and the predicted results were compared with postirradiation examination data from the IFR-1 experiment. Furthermore, a sensitivity study and tuning studies were performed as a preliminary investigation into the causes of inaccurate temperature and dimensional change predictions.The benchmark predicted reasonably accurate values for the burnup and fission gas release. There was error in the predicted temperatures, which could be explained by uncertainty in the input parameters and legacy temperatures. BISON over-predicted dimensional changes in the fuel and cladding. The sensitivity study showed that the dimensional changes were most sensitive to the fuel swelling anisotropy and the cladding void swelling model. Future benchmark and model development should focus on cladding swelling behaviors to improve dimensional change predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Assessment of the BISON Metallic Fuel Performance Models

The US Department of Energy is leading a project to design and construct a fast spectrum test reactor called the Versatile Test Reactor (VTR). The BISON nuclear fuel performance code will be used to model VTR driver fuel, including looking at the effects of differences between the VTR driver fuel element design and the legacy fuel designs and experiments on which it is based. Simulations will be conducted to help determine whether the design’s behavior and performance are properly understood and to assess the margins to cladding failure and fuel melting relative to those predicted for past metallic fuel experiments. These predictions are expected to streamline VTR design and operation by helping inform the VTR driver fuel element design and by providing supplemental information for the fuel design safety basis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Metallic Fuel Benchmark Simulations Based on the X430 Experiments

To gauge the accuracy of current BISON metallic fuel performance models and identify models that require further development, Oak Ridge National Laboratory has developed benchmark problems based on two pins of the X430 experiment. These benchmarks recreate the experimental conditions of the X430 series of experiments with as much accuracy as possible given the available data. The benchmarks were implemented in the BISON nuclear fuel performance code and the simulation results were compared with the experimental results to quantify the simulation accuracy. Findings in this work were consistent with previous benchmark problems. The temperature profiles, burnup, and fission gas behavior were all as accurate as can reasonably be expected. The cladding radial growth was accurate enough to not affect the results of other measurements. The fuel axial growth was accurate for U-Zr fuel but not for U-Pu-Zr fuel, which appears to be caused by a lack of U-Pu-Zr data. Swelling correlations have not been developed for U-Pu-Zr fuel because there were not enough data on this fuel type, so BISON used the U-Zr correlations. Finally, recommendations were made for near-term BISON development.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Metallic Fuel Performance Benchmark Problem Based on the IFR-1 Experiment

Metallic nuclear fuels are an active area of research and development for use in advanced reactors. Robust and accurate metallic fuel performance models are necessary for the design, safety analysis, and licensing of such reactors. However, metallic fuel performance models are not as mature as ceramic fuel performance models and require additional development. In order to better gauge the accuracy of existing models, identify high-priority models for development, and quantify the improvements made by future model development, ORNL has developed a benchmark problem based on the IFR-1 experiment. This work gathers all relevant information on the IFR-1 experiment and uses it to develop the benchmark problem. It simulates the problem using the fuel performance code BISON and compare the results to post-irradiation examination data from the experiment. Then a sensitivity analysis is performed on the BISON model to determine the benchmark problem’s sensitivity to uncertainty in the input parameters. The results suggest that BISON’s mechanical models require additional development. Plastic deformation is under-predicted in the cladding and axial swelling is over-predicted in the fuel. These problems may be related. Additionally, there is a bias in the temperature which may be a result of uncertainty in the input parameters rather than an issue with the fuel performance models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modeling the IFR-1 Experiment: A BISON Metallic Fuel Benchmark

As the 1970s nuclear reactor fleet slowly begins the decommission process, the US Department of Energy Office of Nuclear Energy (DOE-NE) aims to stimulate and support the construction and implementation of new nuclear reactors across the country in hopes of continuing the generation of clean, reliable, resilient energy. As a result, various efforts have been introduced to accelerate this process, including the Versatile Test Reactor project (VTR) and the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Full-core analysis for FeCrAl enhanced accident tolerant fuel in boiling water reactors

The impact of replacing Zircaloy with FeCrAl, a candidate enhanced accident-tolerant fuel cladding material, was evaluated for 10 × 10 boiling water reactor fuel bundles. Results from a series of full-core parametric studies estimated that replacing UO 2 /Zircaloy with UO 2 /FeCrAl would require an average enrichment increase of 0.6% 235 U throughout the fuel lattice with the cladding and channel box thicknesses halved and fuel pellet diameter increased. Full-core results indicated that UO 2 /FeCrAl models with these geometric/enrichment specifications matched the base UO 2 /Zircaloy cycle length of 527 effective full power days. Optimization studies of the full-core design established loading and control blade patterns for both Zircaloy and FeCrAl models. A side study was conducted modeling a hybrid fuel bundle consisting of FeCrAl cladding and a SiC/Ni/Cr channel box. By halving the cladding thickness, the enrichment level required was less than that of the Zircaloy base case design after performing loading pattern optimization of the hybrid bundle core. Lastly, the thermomechanical performance of a Zircaloy-cladded fuel rod was compared to that of a FeCrAl system. Results from this analysis show that, if starting from the same fuel-cladding gap thickness, a FeCrAl-clad fuel rod operates with a greater average fuel centerline temperature, comparable axial elongation and radial displacement, and longer time to gap closure compared to a Zircaloy-clad fuel rod. Furthermore, this fuel performance analysis was primarily based on the commercial Kanthal APMT FeCrAl alloy but also used available data for the C35M FeCrAl alloy developed at Oak Ridge National Laboratory.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Review of Molten Salt Reactor Kinetics Models

Interest in circulating fuel reactors (CFRs), particularly molten salt reactors (MSRs) of the fluid fuel type, has been growing in the last two decades. Starting with a resurgence of interest in Europe, there have been a growing number of methods proposed and codes developed to model the kinetics of CFRs, which is a capability essential to the design and evaluation of such reactors. This work first reviews the physical phenomena unique to CFRs in light of current research and how CFR kinetics are impacted by these considerations. In general, it is found that the movement of delayed neutron precursors (DNPs) through the primary loop has significant impacts on transients at low reactor powers or those with significant spatial components such as a change in the primary loop mass flow rate. Effects on the neutron flux are exceedingly minimal and entirely negligible. An extensive review of published models and methods for simulating CFR kinetics is presented, along with transient simulations in fast and thermal neutron flux systems using representative codes from each of the main modeling categories. Comparisons among methods are presented as are recommendations for their use or nonuse in various transient and work-flow scenarios. In general, it is recommended that time-resolved, multigroup neutron diffusion approaches be used to establish ranges of applicability for point reactor kinetics (PRK)–based approaches that themselves may not be applicable for all modeling situations. In such cases, it is suggested that quasi-static approaches be used where PRK-based approaches cannot be used. Finally, a review of common assumptions used in these models is presented, along with an evaluation of their impact on model performance. It is found that neglecting turbulent diffusion in open core–type CFRs is a poor assumption that leads to an underestimation of the reduction of the delayed neutron fraction. Furthermore, it is seen that exclusion of secondary heat transfer loops in models leads to underestimation of transient peaks and troughs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Sensitivity/uncertainty analyses comparing LR-0 reactor experiments containing FLiBe salt with models for molten-salt-cooled and molten-salt-fueled reactors

Here, critical experiments using an insertion zone with FLiBe salt performed at the LR-0 reactor at Research Centre Rež (RC Rež) have been compared to application models for solid-fueled, fluoride-salt-cooled high-temperature reactor (FHR) and liquid-fueled molten salt reactor (MSR) concepts using sensitivity and uncertainty (S/U) analysis techniques. These experiments support FHR and MSR advanced reactor concepts by informing on neutron spectral effects and nuclear data uncertainties related to fluoride salts. The FLiBe salt in the LR-0 experiments is from the Oak Ridge National Laboratory Molten Salt Reactor Experiment and is enriched to greater than 99.99% 7 Li. This work is part of a broader collaboration between the United States and the Czech Republic on MSR and FHR technology. Results from the S/U analyses for FHR and MSR models indicated the most significant potential source of eigenvalue bias due to nuclear data within the FLiBe salt is radiative capture in 7 Li. Other smaller but potentially significant contributions come from 19 F, 6 Li, and other 7 Li reactions. Similarity comparisons of the RC Rež LR-0 experiments and FHR and MSR application models indicate that the LR-0 FLiBe experiments could be useful as candidate benchmarks for low-enriched uranium–fueled application models. However, sensitivity differences observed included both spectral effects, due to the LR-0 reactor being moderated by water instead of graphite and fluoride salt, and sensitivity magnitude effects driven by the amount of FLiBe inserted and its location. New experiments with refined designs to increase the volume and importance of salt in the system could provide improved data. Results also demonstrate that salt systems using thorium and/or 233 U fuel will require additional experiments with relevant driver fuels. Increased contributions from the graphite moderator and 19 F and covariance between reactions such as 233 U fission and 233 U radiative capture indicate higher uncertainty contributions from the salt and significant differences in contributions from the fuel species due to underlying uncertainties in their nuclear data.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Neutronic experiments with fluorine rich compounds at LR-0 reactor

Here, research on molten salt reactor (MSR) neutronics continues in Research Centre Rez (Czech Republic) with experimental work being conducted using fluoride salt that was originally used in the Molten Salt Reactor Experiment (MSRE). Previous results identified significant variations in the neutron spectrum measured in LiF-NaF salt. These variations could originate from the fluorine description in current nuclear data sets. Subsequent experiments were performed to try to confirm this phenomenon. Therefore, another fluorine-rich compound, Teflon, was used for testing. Critical experiments showed slight discrepancies in C/E-1 for both compounds, Teflon and FLIBE, and systematic overestimation of criticality was observed in calculations. Different nuclear data libraries were used for data set testing. For Teflon, the overestimation is higher when using JENDL-3.3, JENDL-4, and RUSFOND-2010 libraries, all three of which share the same inelastic-to-elastic scattering cross section ratio. Calculations using other libraries (ENDF/B-VII.1, ENDF/B-VII.0, JEFF-3.2, JEFF-3.1, and CENDL-3.1) tend to be closer to the experimental value. Neutron spectrum measurement in both substances revealed structure similar to that seen in previous measurements using LiF-NaF salt, which indicates that the neutron spectrum seems to be strongly shaped by fluorine. Discrepancies between experimental and calculational results seem to be larger in the neutron energy range of 100–1300 keV than in higher energies. In the case of neutron spectrum calculation, none of the tested libraries gives overall better results than the others.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fuel cycle and neutronic performance of a spectral shift molten salt reactor design

Here, the fuel cycle performance and core design of the Transatomic Power liquid-fueled molten salt reactor concept is analyzed. This advanced reactor concept uses configurable zirconium hydride moderator rod assemblies to shift the neutron spectrum in the core from intermediate at beginning of life to thermal at end of life. With a harder spectrum during the early years of reactor operation, this spectral shift design drives captures in fertile 238 U. The converted fissile plutonium makes up over 50% of the fissile material in the fuel salt over the last half (~15 years) of reactor operation. A softer spectrum late in reactor life helps drive the fuel to a burnup of 90 GWd/MTU. Continuously changing physics necessitates time-dependent analyses resolved over long timescales (i.e., months to years), as this concept does not meet an equilibrium condition. The spectral shift and molten salt reactor material feeds and removals enable this concept to perform better in fuel cycle metrics, increasing resource utilization by more than 50% compared with a typical light water reactor (i.e., from ~0.6% to ~1%). Finally, these metrics are compared to similar fuel cycles using alternate technologies. Additional core design and analysis challenges associated with the spectral shift and use of molten salt reactor technology are identified and discussed.

20 FOSSIL-FUELED POWER PLANTS↗