Engineering topics

Pozar, D. M.

Publications and source records attributed to Pozar, D. M..

7 records

NASA NTRS1986

Analysis of the transverse electromagnetic mode linearly tapered slot antenna

A theoretical analysis of the radiation characteristics of the transverse electromagnetic mode linearly tapered slot antenna is presented. The theory presented is valid for antennas with air dielectric and forms the basis for analysis of the more popular dielectric-supported antennas. The method of analysis involves two steps. In the first step, the aperture distribution in the flared slot is determined. In the second step, the equivalent magnetic current in the slot is treated as radiating in the presence of a conducting half-plane, and the far-field components are obtained. Design curves for the variation of the 3-dB and 10-dB beamwidths as a function of the antenna length, with the flare angle as a parameter, are presented.

Janaswamy, R.↗

NASA NTRS1985

Analysis of the Tem Mode Linearly Tapered Slot Antenna

The theoretical analysis of the radiation characteristics of the TEM mode Linearly Tapered Slot Antenna (LTSA) is presented. The theory presented is valid for antennas with air dielectric and forms the basis for analysis of the more popular dielectric-supported antennas. The method of analysis involves two steps. In the first step, the aperture distribution in the flared slot is determined. In the second step, the equivalent magnetic current in the slot is treated as radiating in the presence of a conducting half-plane and the far-field components are obtained. Detailed comparison with experiment is made and excellent agreement is obtained. Design curves for the variation of the 3 dB and 10 dB beamwidths as a function of the antenna length, with the flare angle as a parameter, are presented.

Janaswamy, R.↗

NASA NTRS1985

Dipole and slot elements and arrays on semi-infinite substrates

The printed dipole or slot antenna on a semi-infinite substrate and infinite phased arrays of these elements are investigated. The solution is based on the moment method in the Fourier transform domain. The generalized impedance or admittance matrix can be expressed in rapidly converging infinite-integral or infinite-summation forms, allowing the accurate determination of the current distributions. Using the present formulation, the input impedance, resonant length, and radiation pattern for the isolated antennas, and the reflection coefficient for infinite phased arrays, are calculated.

Kominami, M.↗

NASA NTRS1984

Analysis of an infinite array of rectangular microstrip patches with idealized probe feeds

A solution is presented to the problem of an infinite array of microstrip patches fed by idealized current probes. The input reflection coefficient is calculated versus scan angle in an arbitrary scan plane, and the effects of substrate parameters and grid spacing are considered. It is pointed out that even when a Galerkin method is used the impedance matrix is not symmetric due to phasing through a unit cell, as required for scanning. The mechanism by which scan blindness can occur is discussed. Measurement results are presented for the reflection coefficient magnitude variation with angle for E-plane, H-plane, and D-plane scans, for various substrate parameters. Measured results from waveguide simulators are also presented, and the scan blindness phenomenon is observed and discussed in terms of forced surface waves and a modified grating lobe diagram.

Pozar, D. M.↗

NASA NTRS1984

Scan blindness in infinite phased arrays of printed dipoles

A comprehensive study of infinite phased arrays of printed dipole antennas is presented, with emphasis on the scan blindness phenomenon. A rigorous and efficient moment method procedure is used to calculate the array impedance versus scan angle. Data are presented for the input reflection coefficient for various element spacings and substrate parameters. A simple theory, based on coupling from Floquet modes to surface wave modes on the substrate, is shown to predict the occurrence of scan blindness. Measurements from a waveguide simulator of a blindness condition confirm the theory.

Pozar, D. M.↗

NASA NTRS1983

Considerations for millimeter wave printed antennas

Calculated data are presented on the performance of printed antenna elements on substrates which may be electrically thick, as would be the case for printed antennas at millimeter wave frequencies. Printed dipoles and microstrip patch antennas on polytetrafluoroethylene (PTFE), quartz, and gallium arsenide substrates are considered. Data are given for resonant length, resonant resistance, bandwidth, loss due to surface waves, loss due to dielectric heating, and mutual coupling. Also presented is an optimization procedure for maximizing or minimizing power launched into surface waves from a multielement printed antenna array. The data are calculated by a moment method solution.

Pozar, D. M.↗

NASA NTRS1982

Input impedance and mutual coupling of rectangular microstrip antennas

A moment method solution to the problem of input impedance and mutual coupling of rectangular microstrip antenna elements is presented. The formulation uses the grounded dielectric slab Green's function to account rigorously for the presence of the substrate and surface waves. Both entire basis (EB) and piecewise sinusoidal (PWS) expansion modes are used, and their relative advantages are noted. Calculations of input impedance and mutual coupling are compared with measured data and other calculations.

Pozar, D. M.↗