Engineering topics

Pradhan, Dillip K.

Publications and source records attributed to Pradhan, Dillip K..

8 records

DOE OSTI2024

Above room temperature multiferroic and magnetoelectric properties of (1‐Φ) PZTFT‐Φ CZFMO particulate composites

Magnetoelectric (ME) composites of suitable ferroelectric and magnetic materials can display elevated magnetic and ferroelectric operational temperatures, along with substantial ME coupling, compared to conventional single-phase multiferroics. Herein, we describe the synthesis of (1-Φ) PZTFT-Φ CZFMO, Φ = 0.1, 0.2, 0.3 (PZTFT: [0.6(PbZr 0.53 Ti 0.47 O 3 )–0.4(PbFe 0.5 Ta 0.5 )O 3 ] CZFMO: Co 0.6 Zn 0.4 Fe 1.7 Mn 0.3 O 4 )] particulate (0–3) composites and report on the magnetic as well as ferroelectric phase transitions and magnetoelectric coupling. The phase formation and the induced strain in these composites are investigated via Raman spectroscopy. A large bifurcation of the zero-field cooled-field cooled magnetization curves confirms the highly anisotropic behavior of the composites. These curves also identify spin glass behavior in the CZFMO phase at ≈230 K. The magnetic phase transition of the composite (Φ = 0.2) is reported to be ≈532 (± 10) K. The temperature dependent dielectric data displays the ferroelectric phase transitions from the PZTFT phase and the broad relaxation peak from the CZFMO phase. The quadratic relationship between the magneto-capacitance and the magnetization confirms the existence of biquadratic magnetoelectric coupling in the systems. The collective results are consistent with the presence of a direct magneto-electric effect in the composites, i.e., by the application of magnetic field, the magnetic phase is strained, and this induced strain is responsible for changes of ferroelectric order parameter in the piezoelectric phase. As a result, this attribute makes the current composite structure a promising candidate for multiferroic data storage and processing technologies.

Bhoi, Krishnamayee↗

DOE OSTI2023

Investigations of room temperature multiferroic and magneto-electric properties of (1-Φ) PZTFT-Φ CZFMO particulate composites

Multiferroic composites consisting of a single-phase multiferroic [0.6(PbZr 0.53 Ti 0.47 O 3 )-0.4(PbFe 0.5 Ta 0.5 )O 3 ] as a matrix and a magnetostrictive phase (Co 0.6 Zn 0.4 Fe 1.7 Mn 0.3 O 4 ) dispersed in the matrix are fabricated via hybrid synthesis technique. The structure and surface morphology studies using x-ray diffraction and field emission scanning electron microscopy techniques indicate the formation of 3-0 type particulate composites. Coexistence of soft-magnetic behavior and ferroelectric characteristics are confirmed for composites from magnetization vs magnetic field (M–H) and polarization vs electric field (P–E) measurements, respectively. Magneto-dielectric (MD) measurement shows significant changes in the dielectric properties with the application of a magnetic field, indicating the existence of strong MD behavior. The biquadratic nature of magneto-electric (ME) coupling is described by the Landau free energy equation arising from the strain transfer at the interfaces between the constituent phases. The direct magneto-electric voltage coefficient measurement also confirms very strong coupling between ferroelectricity and magnetism and supports the strain-mediated magneto-electric effect in composites. The Φ = 0.3 composite exhibits the maximum ME coefficient of 20.72 mV/cm Oe with M S = 24.62 emu/g, H C = 59.66 Oe, and piezoelectric coefficient value d 33 = 19 pC/N. In conclusion, the strong magneto-electric effect along with low dielectric loss at room temperature in these composites suggests their suitability for multifunctional magneto-electric device applications such as magnetic sensors, etc.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Enhanced ferroelectric and piezoelectric properties of BCT-BZT at the morphotropic phase boundary driven by the coexistence of phases with different symmetries

The discovery of lead-free piezoelectric materials is crucial for future information and energy storage applications. Enhanced piezoelectric and other physical properties are commonly observed near the morphotropic phase boundary (MPB) composition of ferroelectric solid solutions. The (1 – x)Ba(Zr 0.2 Ti 0.8 )O 3 -x(Ba0.7Ca0.3)TiO 3 (BZT-xBCT) system exhibits a large electromechanical response around its MPB region at x = 0.5. Here, we report experimental and theoretical results of BZT-xBCT over a wide composition range (0.3 ≤ x ≤ 1.0). X-ray diffraction and Raman spectroscopy studies indicate a composition-induced structural phase transition from a rhombohedral (R3m) phase at x ≤ 0.4 to a tetragonal (P4mm) phase at x ≥ 0.6 through a multiphase coexistence region at 0.45 ≤ x ≤ 0.55 involving orthorhombic + tetragonal (Amm2 + P4mm) phases. First-principles calculations elucidate the phase competition in the coexistence region. The critical composition (x = 0.5) displays enhanced dielectric, ferroelectric, and piezoelectric properties, where notably d 33 ~ 320 pC/N. This paper provides clear evidence of Amm2+P4mm crystallographic phases in the MPB region, which is responsible for the improved functional properties.

MPB↗

DOE OSTI2021

Room-temperature large magnetoelectricity in a transition metal doped ferroelectric perovskite

There is increasing interest in novel magnetoelectric (ME) materials that exhibit robust ME coupling at room-temperature (RT) for advanced memory, energy, spintronics, and other multifunctional device applications, by making use of the ability to control polarization with a magnetic field and/or magnetization via an electric field. Obtaining ME materials with strong ME coupling, understanding the origin, and manipulating its processing along with composition to realize large ME coefficients at RT constitute an important step in multiferroic research. To address this, we have investigated the multiferroic and ME properties of Ni-doped Pb(Zr 0.20 Ti 0.80 )O 3 (PZT). We find that the ferroelectric (T C ~ 700 K) and weak ferromagnetic (~ 602 K) phase transitions of Ni-doped PZT are well above RT, leading to a strong ME coupling coefficient (α E,31 ) of 11.7 mVcm -1 Oe -1 (H ac = 1 Oe and f = 1 kHz). While X-ray diffraction suggests a single-phase material, high resolution transmission electron microscopy reveals regions with and without Ni present; thus magnetoelectric coupling between two phases is possible. First-principle calculations suggest the (Ni Pb ) × defect is likely to be responsible for the experimental observed magnetism and ME coupling in Ni-doped PZT. Furthermore, we demonstrate that Ni-doped PZT exhibits low loss tangent, low leakage current, large saturation polarization and weak ferromagnetism. Ultimately, our work demonstrates that Ni-doped PZT is a cost-effective RT multiferroic with strong ME coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Ferroic phase transitions and magnetoelectric coupling in cobalt doped BaTiO 3

Magnetoelectric (ME) materials exhibit interesting physics with cross coupling between ferroelectric and magnetic order parameters and thus strong potential to be utilized in memory, spintronics and other multifunctional electronic/magnetic devices. Doping of suitable transition metals in ferroelectrics can induce magnetism and ME coupling and modify the physical properties. Here, we report the structural, electronic, magnetic and ME coupling of 3.5, 5 and 7.5 mol% cobalt doped BaTiO 3 (BTO) ceramics. X-ray diffraction and Raman spectroscopy indicate that the samples are single phase having a tetragonal crystal structure with P4mm symmetry. The tetragonality ratio is found to decrease with increasing cobalt content. We observed a Fano-like asymmetric peak in the [A 1 (LO 1 )] Raman mode at ~173 cm -1 in all the cobalt doped BTO samples. The cobalt dopants are shown to be uniformly distributed throughout the surface of the samples. We observed a lowering of the ferroelectric transition temperature and increasing diffusivity parameter with increasing cobalt concentration. The electrical properties of all the samples have been investigated in detail by impedance spectroscopy and ac conductivity studies before and after the ferroelectric phase transitions. All the samples show hysteretic ferroelectric behavior with a clear saturation state that decreases with increasing cobalt content. The observed ferroelectricity in these samples is intrinsic in nature. The 3.5% cobalt doped BTO sample exhibits paramagnetic behavior whereas the 5 and 7.5% cobalt doped BTO samples show ferromagnetic ordering below 43 K. The 7.5% cobalt doped BTO samples show significant ME coupling.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Exploring phase transitions and magnetoelectric coupling of epitaxial asymmetric multilayer heterostructures

Magnetoelectric (ME) heterostructures can exhibit higher magnetic and ferroelectric ordering temperatures along with large ME coupling compared to single-phase multiferroic materials. We synthesized Pb(Fe 0.5 Nb 0.5 )O 3 (PFN)/Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO)/Pb(Fe 0.5 Nb 0.5 )O 3 (PFN)/Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO)/Pb(Fe 0.5 Nb 0.5 )O 3 (PFN) multilayer heterostructures having dimensions of 40/10/40/10/40 nm. High quality epitaxial growth of these heterostructures was confirmed via X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns. These nanostructures show well saturated polarization (~52 μC cm -2 ) and magnetization (~62 emu cm -3 ) at room temperature (RT). The magnetic and ferroelectric transitions occur well above RT. These heterostructures exhibit relaxor behavior and undergo 2nd order ferroelectric phase transition. Magnetodielectric measurements show significant coupling between the magnetic and electrical order parameters at RT. These characteristics of the heterostructures make them suitable as potential candidates for ultra-low power memory, spintronics, and different multifunctional (micro)nanoscale device applications.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Room temperature multiferroicity and magnetodielectric coupling in 0–3 composite thin films

Magnetoelectric (ME) composite thin films are promising candidates for novel applications in future nanoelectronics, spintronics, memory and other multifunctional devices as they exhibit much higher ME coupling and transition temperatures (Tc) than well-known single phase multiferroics discovered to date. Among the three types of multiferroic composite nanostructures, (2-2) layered and (1-3) vertically aligned composite nanostructures exhibit comparatively smaller ME coupling due to different shortcomings which restrict their use in many applications. Here we study the morphological, piezoresponse force microscopic (PFM), ferroelectric, magnetic, and magnetodielectric properties of 0-3 (magnetic nanoparticles (0) homogeneously distributed in ferroelectric matrices (3)) multiferroic composite thin films. The Pb(Fe 0.5 Nb 0.5 )O 3 (PFN) - Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO) particulate composite films were synthesized by pulsed laser deposition (PLD). These particulate composite thin films are completely c-axis oriented with very low surface roughness. We observed magnetic and ferroelectric T c above room temperature (RT) for all composite thin films. The PFN-NZFO 0-3 composites exhibit large polarization, high saturated magnetization with low coercive field, low dielectric loss along with magnetodielectric coupling at RT. These nanocomposites might be utilized in next generation nano/microelectronics and spintronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Exploring the Magnetoelectric Coupling at the Composite Interfaces of FE/FM/FE Heterostructures

Multiferroic materials have attracted considerable attention as possible candidates for a wide variety of future microelectronic and memory devices, although robust magnetoelectric (ME) coupling between electric and magnetic orders at room temperature still remains difficult to achieve. In order to obtain robust ME coupling at room temperature, we studied the Pb(Fe0.5Nb0.5)O3/Ni0.65Zn0.35Fe2O4/ Pb(Fe0.5Nb0.5)O3 (PFN/NZFO/PFN) trilayer structure as a representative FE/FM/FE system. We report the ferroelectric, magnetic and ME properties of PFN/NZFO/PFN trilayer nanoscale heterostructure having dimensions 70/20/70nm, at room temperature. The presence of only (00l) refection of PFN and NZFO in the X-ray diffraction (XRD) patterns and electron diffraction patterns in Transmission Electron Microscopy (TEM) confirm the epitaxial growth of multilayer heterostructure. The distribution of the ferroelectric loop area in a wide area has been studied, suggesting that spatial variability of ferroelectric switching behavior is low, and film growth is of high quality. The ferroelectric and magnetic phase transitions of these heterostructures have been found at ~575K and ~650K, respectively which are well above room temperature. These nanostructures exhibit low loss tangent, large saturation polarization (Ps ~ 38µC/cm2) and magnetization (Ms ~ 48emu/cm3) with strong ME coupling at room temperature revealing them as potential candidates for nanoscale multifunctional and spintronics device applications.

36 MATERIALS SCIENCE↗