Engineering topics
Prater, Tracie
Publications and source records attributed to Prater, Tracie.
The Proving Ground: Using Low Earth Orbit as a Test Bed for Manufacturing Technology Development
No abstract available
In-Space Manufacturing: The Gateway to the High Frontier and an Enabling Technology for Human Space Exploration
No abstract available
Daring You to Ask What If?
Why Centennial Challenges? The program was established to conduct prize competitions in support of the Vision for Space Exploration and ongoing NASA programs. Although the first competition was started in 2005, development of the program started in 2003 to commemorate.
ISM In-Space Manufacturing Project Brochure
The In-Space Manufacturing (ISM) Project is a NASA asset managed out of Marshall Space Flight Center that is responsible for developing the capabilities to provide on-demand, sustainable manufacturing, repair, and recycling operations during NASA Exploration Missions (in-transit and on-surface). One of ISM’s primary objectives with the key capabilities being developed is a “Make it, Don’t take it” approach. This includes testing and advancing the desired technologies, as well as establishing the required skills and processes for the processes (such as certification and characterization) that will enable the technologies to become institutionalized.
NASA's In Space Manufacturing Initiative Update and In-Situ Monitoring Development
No abstract available
NASA Additive Manufacturing Initiatives for Deep Space Human Exploration
Additive Manufacturing (AM) is being infused into aerospace industries at an accelerated pace. Reasons for this rapid adoption include: (1) Innovation Capability e.g. design features such as topology optimization, integrated fluid passages, and mesh structures; (2) Rapid Development and Optimization - ability to quickly iterate the design, development, and test cycle; (3) Affordability - reductions in part counts, cost, and schedule. NASA's Marshall Space Flight Center (MSFC) has taken a leadership role in application of AM technologies for deep space human exploration, leading the Agency's In Space Manufacturing (ISM) initiative and the application of AM for a broad variety of space propulsion systems. MSFC has championed the development of ISM capabilities since our first reduced-gravity aircraft experiment flew in 1999. Partnering with Made In Space, MSFC placed the first 3D Printer on ISS in 2014 and the second generation printer, the Additive Manufacturing Facility, in 2016. The next ISS technology demonstration will be the Refabricator, a recycler/basic printer scheduled to launch in late Fall 2018. Ground-based development is progressing in common use materials, metals 3D printing, printed electronics, and the new cornerstone of ISM, the FabLab. The latest developments in each area will be described. An overview of NASA's In Space Robotic Manufacturing and Assembly (IRMA) ground-based risk reduction projects will also be presented. MSFC has aggressively incorporated AM capabilities for design and development of space propulsion components. The capabilities have been rapidly matured and extensively exercised to produce and hot-fire test the Additive Manufacturing Demonstrator Engine, an in-space class prototype engine. This experience base has been extended to support Aerojet Rocketdyne in the application of AM to the RS-25, the Space Launch System Core Stage engine, and to small propulsion systems and thrusters for small satellites and cubesats. The latest developments will be described. In responding to a request from NASA's Commercial Crew Program for a consistent methodology for evaluation of AM processes and parts, MSFC began development of a draft standard for AM space flight hardware in late 2014. The draft was broadly disseminated for comments in mid-2015, and subsequently revised into two documents, a standard and a specification for AM space flight hardware, which were formally released by MSFC in October 2017. An overview of the key elements of these documents will be presented.
NASA's Centennial Challenge for 3D Printed Habitat Phase II Outcomes and Phase III Competition Overview
No abstract available
NASA's In-Space Manufacturing Project: Toward a Multimaterial Fabrication Laboratory for the International Space Station
uman space exploration to date has been limited to low Earth orbit and the moon. The International Space Station (ISS) provides a unique opportunity for NASA to partner with private industry for development and demonstration of the technologies needed to support exploration initiatives. One challenge that is critical to sustainable and safer exploration is the ability to manufacture and recycle materials in space. This paper provides an overview of NASA's in-space manufacturing (ISM) project, its past and current activities, and how technologies under development will ultimately culminate in a multimaterial fabrication laboratory ("ISM FabLab") to be deployed on the International Space Station in the early 2020s. ISM is a critical capability for the long endurance missions NASA seeks to undertake in the coming decades. An unanticipated failure that can be adapted for in low earth orbit, through a resupply launch or a return to earth, may instead result in a loss of mission while in transit to Mars. To have a suite of functional ISM capabilities that are compatible with NASA's exploration timeline, ISM must be equipped with the resources necessary to develop these technologies and deploy them for testing prior to the scheduled de-orbit of ISS in 2024. The paper provides a broad overview of ISM projects activities culminating with the Fabrication Laboratory for ISS. The FabLab will move NASA and private industry significantly closer to changing historical paradigms for human spaceflight where all materials used in space are launched from earth. While the current ISM FabLab will be tested on ISS, future systems are eventually intended for use in a deep space habitat or transit vehicle. The work of commercial companies funded under NASA's Small Business Innovative Research Program (SBIR) is also discussed, as these activities, from development of recyclable packaging for ISS to additive manufacturing capabilities for metals and electronics, could also potentially be infused into FabLab exploration capabilities as well.
In-Space Manufacturing at NASA Marshall Space Flight Center: A Portfolio of Fabrication and Recycling Technology Development for the International Space Station
The in-space manufacturing project at NASA Marshall Space Flight Center seeks to mature the manufacturing capabilities which will be needed on long duration, long endurance human spaceflight missions. The ability to manufacture materials and parts in space rather than launching them from earth has the potential to reduce logistics requirements and enhance crew safety. The International Space Station serves as a unique orbiting test bed for in-space manufacturing technology development for NASA and its commercial partners. This paper provides an overview of the projects currently in the in-space manufacturing technology portfolio and key technology development efforts in the past year.
A Portfolio of Fabrication and Recycling Technology Development for the International Space Station
No abstract available