Search NASA⌕ Search

Engineering topics

Price, D

Publications and source records attributed to Price, D.

Resonances in (11)C observed in the (4)He((7)Be, alpha)(7)Be and (4)He((7)Be, p)(10)B reactions

Measurements of the {sup 4}He({sup 7}Be,{alpha}){sup 7}Be and {sup 4}He({sup 7}Be,p){sup 10}B reactions were performed using {sup 7}Be beam energies of 7.1 and 23 MeV and a helium-4 target, employing the thick target technique. Resonances were observed between E{sub x}({sup 11}C) = 8.6 to 13.8 MeV. An R-matrix analysis was performed to characterize the spins and partial widths. This analysis showed that the observed sequence of states was consistent with that found for {sup 7}Li + {alpha} resonant scattering populating resonances in {sup 11}B. A comparison of the proposed partial widths for decay with the Wigner limit indicates that several of the states are associated with cluster-like structures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TESTING A SCALE-INDEPENDENT METHOD TO MEASURE THE MASS OF BLACK HOLES

Estimating the black hole mass at the center of galaxies is a fundamental step not only for understanding the physics of accretion, but also for the cosmological evolution of galaxies. Recently, a new method, based solely on X-ray data, was successfully applied to determine the black hole mass in Galactic systems. Since X-rays are thought to be produced via Comptonization process both in stellar and supermassive black holes, in principle, the same method may be applied to estimate the mass in supermassive black holes. In this work we test this hypothesis by performing a systematic analysis of a sample of active galactic nuclei, whose black hole mass has been already determined via reverberation mapping and which possess high-quality XMM-Newton archival data. The good agreement obtained between the black hole masses derived with this novel scaling technique and the reverberation mapping values suggests that this method is robust and works equally well on stellar and supermassive black holes, making it a truly scale-independent technique for black hole determination.

79 ASTRONOMY AND ASTROPHYSICS↗

LASER WAKEFIELD ACCELERATION BEYOND 1 GeV USING IONIZATION INDUCED INJECTION*

A series of laser wake field accelerator experiments leading to electron energy exceeding 1 GeV are described. Theoretical concepts and experimental methods developed while conducting experiments using the 10 TW Ti:Sapphire laser at UCLA were implemented and transferred successfully to the 100 TW Callisto Laser System at the Jupiter Laser Facility at LLNL. To reach electron energies greater than 1 GeV with current laser systems, it is necessary to inject and trap electrons into the wake and to guide the laser for more than 1 cm of plasma. Using the 10 TW laser, the physics of self-guiding and the limitations in regards to pump depletion over cm-scale plasmas were demonstrated. Furthermore, a novel injection mechanism was explored which allows injection by ionization at conditions necessary for generating electron energies greater than a GeV. The 10 TW results were followed by self-guiding at the 100 TW scale over cm plasma lengths. The energy of the self-injected electrons, at 3 x 10{sup 18} cm{sup -3} plasma density, was limited by dephasing to 720 MeV. Implementation of ionization injection allowed extending the acceleration well beyond a centimeter and 1.4 GeV electrons were measured.

42 ENGINEERING↗

Thomson-scattering measurements in the collective and noncollective regimes in laser produced plasmas (invited)

We present simultaneous Thomson-scattering measurements of light scattered from ion-acoustic and electron-plasma fluctuations in a N{sub 2} gas jet plasma. By varying the plasma density from 1.5x10{sup 18} to 4.0x10{sup 19} cm{sup -3} and the temperature from 100 to 600 eV, we observe the transition from the collective regime to the noncollective regime in the high-frequency Thomson-scattering spectrum. These measurements allow an accurate local measurement of fundamental plasma parameters: electron temperature, density, and ion temperature. Furthermore, experiments performed in the high densities typically found in laser produced plasmas result in scattering from electrons moving near the phase velocity of the relativistic plasma waves. Therefore, it is shown that even at low temperatures relativistic corrections to the scattered power must be included.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

4{omega} Thomson scattering probe for high-density plasma characterization at Titan

In preparation for the upcoming experiments on the Titan laser at the Jupiter Laser Facility, a new Thomson scattering system has been designed and implemented. This system allows electron temperature and density measurements in a high-density regime (n{sub e}>10{sup 21} cm{sup -3}). A 263 nm probe has been demonstrated to produce a total energy of 15 J at 4{omega}(263 nm) in a 1 ns square pulse with a focal spot size of 100 {mu}m. This probe has been used for imaging Thomson scattering of the ion feature. The goal of this study is to investigate the heating of a preformed plasma by a short-pulse heater beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic Quasimonoenergetic Positron Jets from Intense Laser-Solid Interactions

Detailed angle and energy resolved measurements of positrons ejected from the back of a gold target that was irradiated with an intense picosecond duration laser pulse reveal that the positrons are ejected in a collimated relativistic jet. The laser-positron energy conversion efficiency is {approx}2x10{sup -4}. The jets have {approx}20 degree angular divergence and the energy distributions are quasimonoenergetic with energy of 4 to 20 MeV and a beam temperature of {approx}1 MeV. The sheath electric field on the surface of the target is shown to determine the positron energy. The positron angular and energy distribution is controlled by varying the sheath field, through the laser conditions and target geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of Relativistic Effects in Collective Thomson Scattering

We observe relativistic modifications to the Thomson scattering spectrum in a traditionally classical regime: v{sub osc}/c=eE{sub 0}/cm{omega}{sub 0}<<1 and T{sub e}<1 keV. The modifications result from scattering off electron-plasma fluctuations with relativistic phase velocities. Normalized phase velocities v/c between 0.03 and 0.12 have been achieved in a N{sub 2} gas-jet plasma by varying the plasma density from 3x10{sup 18} cm{sup -3} to 7x10{sup 19} cm{sup -3} and electron temperature between 85 and 700 eV. For these conditions, the complete temporally resolved Thomson scattering spectrum including the electron and ion features has been measured. A relativistic treatment of the Thomson scattering form factor shows excellent agreement with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of relativistic effects in collective Thomson scattering

We observe relativistic modifications to the Thomson scattering spectrum in a traditionally classical regime: v{sub osc}/c = eE{sub 0}/cm{omega}{sub 0} << 1 and T{sub e} < 1 keV. The modifications result from scattering off electron-plasma fluctuations with relativistic phase velocities. Normalized phase velocities v/c between 0.03 and 0.12 have been achieved in a N{sub 2} gas-jet plasma by varying the plasma density from 3 x 10{sup 18} cm{sup -3} to 7 x 10{sup 19} cm{sup -3} and electron temperature between 85 eV and 700 eV. For these conditions, the complete temporally resolved Thomson scattering spectrum including the electron and ion features has been measured. A fully relativistic treatment of the Thomson scattering form factor has been developed and shows excellent agreement with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser Created Relativistic Positron Jets

Electron-positron jets with MeV temperature are thought to be present in a wide variety of astrophysical phenomena such as active galaxies, quasars, gamma ray bursts and black holes. They have now been created in the laboratory in a controlled fashion by irradiating a gold target with an intense picosecond duration laser pulse. About 10{sup 11} MeV positrons are emitted from the rear surface of the target in a 15 to 22-degree cone for a duration comparable to the laser pulse. These positron jets are quasi-monoenergetic (E/{delta}E {approx} 5) with peak energies controllable from 3-19 MeV. They have temperatures from 1-4 MeV in the beam frame in both the longitudinal and transverse directions. Positron production has been studied extensively in recent decades at low energies (sub-MeV) in areas related to surface science, positron emission tomography, basic antimatter science such as antihydrogen experiments, Bose-Einstein condensed positronium, and basic plasma physics. However, the experimental tools to produce very high temperature positrons and high-flux positron jets needed to simulate astrophysical positron conditions have so far been absent. The MeV temperature jets of positrons and electrons produced in our experiments offer a first step to evaluate the physics models used to explain some of the most energetic phenomena in the universe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Making Relativistic Positrons Using Ultra-Intense Short Pulse Lasers

This paper describes a new positron source produced using ultra-intense short pulse lasers. Although it has been studied in theory since as early as the 1970s, the use of lasers as a valuable new positron source was not demonstrated experimentally until recent years, when the petawatt-class short pulse lasers were developed. In 2008 and 2009, in a series of experiments performed at Lawrence Livermore National Laboratory, a large number of positrons were observed after shooting a millimeter thick solid gold target. Up to 2 x 10{sup 10} positrons per steradian ejected out the back of {approx}mm thick gold targets were detected. The targets were illuminated with short ({approx}1 ps) ultra-intense ({approx}1 x 10{sup 20} W/cm{sup 2}) laser pulses. These positrons are produced predominantly by the Bethe-Heitler process, and have an effective temperature of 2-4 MeV, with the distribution peaking at 4-7 MeV. The angular distribution of the positrons is anisotropic. For a wide range of applications, this new laser based positron source with its unique characteristics may complements the existing sources using radioactive isotopes and accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultrafast K{alpha} x-ray Thomson scattering from shock compressed lithium hydride

Spectrally and temporally resolved x-ray Thomson scattering using ultrafast Ti K{alpha} x rays has provided experimental validation for modeling of the compression and heating of shocked matter. The coalescence of two shocks launched into a solid density LiH target by a shaped 6 ns heater beam was observed from rapid heating to temperatures of 2.2 eV, enabling tests of shock timing models. Here, the temperature evolution of the target at various times during shock progression was characterized from the intensity of the elastic scattering component. The observation of scattering from plasmons, electron plasma oscillations, at shock coalescence indicates a transition to a dense metallic plasma state in LiH. From the frequency shift of the measured plasmon feature the electron density was directly determined with high accuracy, providing a material compression of a factor of 3 times solid density. The quality of data achieved in these experiments demonstrates the capability for single shot dynamic characterization of dense shock compressed matter. The conditions probed in this experiment are relevant for the study of the physics of planetary formation and to characterize inertial confinement fusion targets for experiments such as on the National Ignition Facility, Lawrence Livermore National Laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

K-(alpha) X-ray Thomson Scattering From Dense Plasmas

Spectrally resolved Thomson scattering using ultra-fast K-{alpha} x-rays has measured the compression and heating of shocked compressed matter. The evolution and coalescence of two shock waves traveling through a solid density LiH target were characterized by the elastic scattering component. The density and temperature at shock coalescence, 2.2 eV and 1.7 x 10{sup 23}cm{sup -3}, were determined from the plasmon frequency shift and the relative intensity of the elastic and inelastic scattering features in the collective scattering regime. The observation of plasmon scattering at coalescence indicates a transition to the dense metallic state in LiH. The density and temperature regimes accessed in these experiments are relevant for inertial confinement fusion experiments and for the study of planetary formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetically Controlled Optical Plasma Waveguide for Electron Acceleration

In order to produce multi-Gev electrons from Laser Wakefield Accelerators, we present a technique to guide high power laser beams through underdense plasma. Experimental results from the Jupiter Laser Facility at the Lawrence Livermore National Laboratory that show density channels with minimum plasma densities below 5x10{sup 17} cm{sup -3} are presented. These results are obtained using an external magnetic field (<5 T) to limit the radial heat flux from a pre-forming laser beam. The resulting increased plasma pressure gradient produces a parabolic density gradient which is tunable by changing the external magnetic field strength. These results are compared with 1-D hydrodynamic simulations, while quasi-static kinetic simulations show that for these channel conditions 90% of the energy in a 150 TW short pulse beam is guided over 5 cm and predict electron energy gains of 3 GeV.

43 PARTICLE ACCELERATORS↗