Search NASA⌕ Search

Engineering topics

Price, Joseph M.

Publications and source records attributed to Price, Joseph M..

15 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

DSMC Simulations of Blunt Body Flows for Mars Entries: Mars Pathfinder and Mars Microprobe Capsules

The hypersonic transitional flow aerodynamics of the Mars Pathfinder and Mars Microprobe capsules are simulated with the direct simulation Monte Carlo method. Calculations of axial, normal, and static pitching coefficients were obtained over an angle of attack range comparable to actual flight requirements. Comparisons are made with modified Newtonian and free-molecular-flow calculations. Aerothermal results were also obtained for zero incidence entry conditions.

Moss, James N.↗
NASA NTRS1996

DSMC simulations of OREX entry conditions

Results of direct simulation Monte Carlo (DSMC) solutions are presented for the Japanese Orbital Reentry Experiment (OREX) vehicle, a 50 deg half-angle spherically blunted cone with a nose radius of 1.35 m and a base diameter of 3.4 m. The flow conditions simulated are those for entry into the Earth's atmosphere at a nominal velocity of about 7.4 km/s and zero incidence. Calculations are made for the higher altitude portion of entry, encompassing the transitional flow regime (altitudes of 200 to 80 km). Comparisons with flight measured values are made for axial acceleration, surface pressure, and stagnation point heating.

Moss, James N.↗
NASA NTRS1996

Rarefaction effects on Galileo probe aerodynamics

Solutions of aerodynamic characteristics are presented for the Galileo Probe entering Jupiter's hydrogen-helium atmosphere at a nominal relative velocity of 47.4 km/s. Focus is on predicting the aerodynamic drag coefficient during the transitional flow regime using the direct simulation Monte Carlo (DSMC) method. Accuracy of the probe's drag coefficient directly impacts the inferred atmospheric properties that are being extracted from the deceleration measurements made by onboard accelerometers as part of the Atmospheric Structure Experiment. The range of rarefaction considered in the present study extends from the free molecular limit to continuum conditions. Comparisons made with previous calculations and experimental measurements show the present results for drag to merge well with Navier-Stokes and experimental results for the least rarefied conditions considered.

Moss, James N.↗
NASA NTRS1996

Assessment of thermochemical nonequilibrium and slip effects for Orbital Reentry Experiment (OREX)

Results are provided from a viscous shock layer (VSL) analysis of the reentry flowfield around the forebody of the Japanese Orbital Reentry Experiment (OREX) vehicle. This vehicle is a 50 deg. spherically blunted cone with a nose radius of 1.35 m and a base diameter of 3.4 m. Calculations are done for the OREX trajectory from 105 to 48.4 km altitude range. A 7-species chemical model is found adequate for the flowfield analysis. However, for altitudes greater than 84 km, the low density effects (such as thermal nonequilibrium and slip) are to be implemented for good agreement between the predictions and flight inferred heat-transfer rate data. Further, at altitudes lower than 84 km, a finite surface recombination probability is to be employed in place of a non-catalytic surface for better comparison between the calculations and data. VSL results are also compared with the direct simulation Monte Carlo (DSMC) predictions at high altitudes (greater than 80 km) and the electron number density data for three altitudes in the OREX trajectory. Overall, there is a good comparison between the flight data and calculated results. With the ongoing refinements in data extraction procedures, the OREX data should prove valuable for validating theoretical models employed in flowfield codes for calculation of reacting-gas flowfields.

Gupta, Roop N.↗
NASA NTRS1993

Near wake structure for a generic ASTV configuration

Results of a numerical study are presented for hypersonic low-density flow about a 70-deg blunt cone using the direct simulation Monte Carlo method. Particular emphasis is given to the near wake flow and its sensitivity to rarefaction and other parametric variations. The flow conditions simulated are attainable in existing low-density hypersonic wind tunnels; that is, Mach 20 nitrogen flow encompassing freestream Knudsen numbers of 0.03 to 0.001. A stable vortex forms in the near wake at and below a freestream Knudsen number of 0.01 and the size of the vortex increases with decreasing freestream Knudsen number. The base region of the flow remains in thermal nonequilibrium for all cases. There is no formation of a lip separation shock or a distinct wake shock at these rarefied conditions.

Dogra, Virendra K.↗
NASA NTRS1993

Direct Monte Carlo Simulations of Hypersonic Viscous Interactions Including Separation

Results of calculations obtained using the direct simulation Monte Carlo method for Mach 25 flow over a control surface are presented. The numerical simulations are for a 35-deg compression ramp at a low-density wind-tunnel test condition. Calculations obtained using both two- and three-dimensional solutions are reviewed, and a qualitative comparison is made with the oil flow pictures highlight separation and three-dimensional flow structure.

Moss, James N.↗
NASA NTRS1992

Hypersonic rarefied flow past spheres including wake structure

Results of a numerical study using the direct simulation Monte Carlo method are presented for hypersonic rarefied flow past spheres. The flow conditions considered are those corresponding to low density wind tunnel test conditions. The set of the experimental conditions for the calculations encompasses the transitional to near-continuum flow regimes. Comparison of the calculated drag with experimental results shows good agreement to well within the experimental error. Particular attention is focused on the wake structure. Calculations show that the wake is very rarefied with considerable thermal nonequilibrium for all the cases considered. No flow separation is observed in the wake for the near-continuum case where a vortex has been predicted by Navier-Stokes type calculations.

Dogra, Virendra K.↗
NASA NTRS1991

Hypersonic rarefied flow about a compression corner - DSMC simulation and experiment

The phenomena of shock/boundary-layer interactions and flow separation are investigated using both computational and experimental methods for low-density hypersonic flow about two-dimensional compression corners. The numerical calculations are made with the direct simulation Monte Carlo (DSMC) method. Experimental measurements provide information concerning the flowfield structure and surface flow patterns by means of gas glow discharge and oil flow pictures, respectively. Comparison of the two data sets provides a qualitative basis for assessing the ability of the DSMC method to describe such flows.

Moss, James N.↗
NASA NTRS1991

On the computation of near wake, aerobrake flowfields

Simulations of the near wake flowfield behind three aerobrakes have been implemented with Program LAURA, an algorithm for obtaining the numerical solution to the governing equations for three-dimensional, viscous, hypersonic flows in chemical and thermal nonequilibrium. Emphasis is placed on understanding the conditons which are likely to cause the shear layer to impinge on a payload positioned behind the aerobrake. A linear relationship between shear layer deflection angle and angle of attack (or lift-to-drag ratio) has been identified in several ground based tests. A similar relation appears in the numerical simulations, though there is some evidence that deflection angels may increase somewhat due to the effects of gas chemistry. Shear layer impingement can raise local heating levels a factor of 10 higher than levels present without impingement. Payload heating levels near impingement points are a larger percentage of stagnation point heating levels at higher altitudes and peak payload heating levels are likely to occur earlier in the trajectory than peak heating on the forebody stagnation point.

Gnoffo, Peter A.↗
NASA NTRS1990

DSMC calculations for the double ellipse

The direct simulation Monte Carlo (DSMC) method involves the simultaneous computation of the trajectories of thousands of simulated molecules in simulated physical space. Rarefied flow about the double ellipse for test case 6.4.1 has been calculated with the DSMC method of Bird. The gas is assumed to be nonreacting nitrogen flowing at a 30 degree incidence with respect to the body axis, and for the surface boundary conditions, the wall is assumed to be diffuse with full thermal accommodation and at a constant wall temperature of 620 K. A parametric study is presented that considers the effect of variations of computational domain, gas model, cell size, and freestream density on surface quantities.

Moss, James N.↗
NASA NTRS1989

Direct simulation of AFE forebody and wake flow with thermal radiation

Calculated results for the flowfield structure and surface quantities are presented for an axisymmetric representation of an aeroassist flight experiment vehicle. The direct simulation Monte Carlo (DSMC) method is used to perform the calculations, since the flow is highly nonequilibrium about the vehicle during both the compression and expansion phases. The body configuration is an elliptically blunt nose followed by a skirt with a circular radius and an afterbody. Freestream conditions correspond to a single point along the entry trajectory at an altitude of 90 km and a velocity of 9.9 km/s. The calculations account for nonequilibrium in the translational and internal modes, dissociation, ionization, and thermal radiation. The degree of dissociation is large, but the maximum ionization is only about 2 percent by mole fraction. The blunt forebody flow experiences a high degree of thermal nonequilibrium in which the translational temperature is generally greater than the internal temperature. However, as the flow expands about the aerobrake skirt and afterbody, the internal temperature is generally greater than the translational temperature.

Moss, James N.↗
NASA NTRS1989

Rarefied flow past a flat plate at incidence

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the transitional flow about a flat plate at 40 deg incidence. The plate has zero thickness and a length of 1.0 m. The flow conditions simulated are those experienced by the Shuttle Orbiter during reentry at 7.5 km/s. The range of freestream conditions are such that the freestream Knudsen number values are between 0.02 and 8.4, i.e., conditions that encompass most of the transitional flow regime. The DSMC simulations show that transitional effects are evident when compared with free molecule results for all cases considered. The calculated results demonstrate clearly the necessity of having a means of identifying the effects of transitional flow when making aerodynamic flight measurements as are currently being made with the Space Shuttle Orbiter vehicles. Previous flight data analyses have relied exclusively on adjustments in the gas-surface interaction models without accounting for the transitional effect which can be comparable in magnitude. The present calculations show that the transitional effect at 175 km would increase the Space Shuttle Orbiter lift-drag ratio by 90 percent over the free molecule value.

Dogra, Virendra K.↗
NASA NTRS1988

Rarefied flow past a flat plate at incidence

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the transitional flow about a flat plate at 40 deg incidence. The plate has zero thickness and a length of 1.0 m. The flow conditions simulated are those experienced by the Shuttle Orbiter during reentry at 7.5 km/s. The range of freestream conditions are such that the freestream Knudsen number values are between 0.02 and 8.4, i.e., conditions that encompass most of the transitional flow regime. The DSMC simulations show that transitional effects are evident when compared with free molecule results for all cases considered. The calculated results demonstrate clearly the necessity of having a means of identifying the effects of transitional flow when making aerodynamic flight measurements as are currently being made with the Space Shuttle Orbiter vehicles. Previous flight data analyses have relied exclusively on adjustments in the gas-surface interaction models without accounting for the transitional effect which can be comparable in magnitude. The present calculations show that the transitional effect at 175 km would increase the Space Shuttle Orbiter lift-drag ratio by 90 percent over the free molecule value.

Dogra, Virendra K.↗
NASA NTRS1988

Direct simulation of AFE forebody and wake flow with thermal radiation

Calculated results for the flowfield structure and surface quantities are presented for an axisymmetric representation of an aeroassist flight experiment vehicle. The direct simulation Monte Carlo (DSMC) method is used to perform the calculations, since the flow is highly nonequilibrium about the vehicle during both the compression and expansion phases. The body configuration is an elliptically blunt nose followed by a skirt with a circular radius and an afterbody. Freestream conditions correspond to a single point along the entry trajectory at an altitude of 90 km and a velocity of 9.9 km/s. The calculations account for nonequilibrium in the translational and internal modes, dissociation, ionization, and thermal radiation. The degree of dissociation is large, but the maximum ionization is only about 2 percent by mole fraction. The bluntforebody flow experiences a high degree of thermal nonequilibrium in which the translational temperature is generally greater than the internal temperature. However, as the flow expands about the aerobrake skirt and afterbody, the internal temperature is generally greater than the translational temperature.

Moss, James N.↗