Engineering topics

Pu, Yunqiao

Publications and source records attributed to Pu, Yunqiao.

75 records · Page 5

DOE OSTI2020

Synthesis, Characterization, and Utilization of a Lignin-Based Adsorbent for Effective Removal of Azo Dye from Aqueous Solution

How to effectively remove toxic dyes from the industrial wastewater using a green low-cost lignocellulose-based adsorbent, such as lignin, has become a topic of great interest but remains quite challenging. In this study, cosolvent-enhanced lignocellulosic fractionation (CELF) pretreatment and Mannich reaction were combined to generate an aminated CELF lignin which is subsequently applied for removal of methylene blue and direct blue (DB) 1 dye from aqueous solution. 31P NMR was used to track the degree of amination, and an orthogonal design was applied to determine the relationship between the extent of amination and reaction parameters. The physicochemical, morphological, and thermal properties of the aminated CELF lignin were characterized to confirm the successful grafting of diethylenetriamine onto the lignin. The aminated CELF lignin proved to be an effective azo dye-adsorbent, demonstrating considerably enhanced dye decolorization, especially toward DB 1 dye (>90%). It had a maximum adsorption capacity of DB 1 dye of 502.7 mg/g, and the kinetic study suggested the adsorption process conformed to a pseudo-second-order kinetic model. The isotherm results also showed that the modified lignin-based adsorbent exhibited monolayer adsorption. The adsorbent properties were mainly attributed to the incorporated amine functionalities as well as the increased specific surface area of the aminated CELF lignin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Lignin-derived electrochemical energy materials and systems

Electrochemical energy storage systems such as supercapacitors, rechargeable batteries and fuel cells have been proven the most effective technologies for energy conversion, storage, and management at different scales. Although a large number of electrochemical energy technologies have been developed in the past and they will continue to be optimized in terms of cost, lifetime, and performance, there is a substantial growing demand for advanced electrochemical energy systems. To deploy these advanced systems, the electrode and electrolyte materials with higher performance, longer life, and lower cost, must be developed. Lignin is the second most abundant natural polymer after cellulose, a byproduct from emerging cellulosic biorefineries, and a waste product from pulp and paper industries. Numerous researches have successfully demonstrated that lignin from different sources can be used as precursors or feedstocks for preparing high-performance electrochemical energy materials and components such as electrodes, electrolytes, membrane separators, and additives. Moreover, techno-economic analyses indicate that it is possible to prepare cost-effective carbons from lignin at engineering scales, compared to current carbon products. These facts suggest that scalable conversion of lignin into high-value energy materials will offer a promising pathway to not only promote the utilization and valorization of lignin but also boost the development of the advanced electrochemical energy systems. This review presents state of the arts of renewable energy materials derived from various lignin and their applications in electrochemical energy systems with emphasis on supercapacitors, rechargeable batteries, and fuel cells. Meanwhile, this article also aims to carve out the critical barriers for lignin-derived high-performance materials for energy applications, intending to identify viable approaches for synthesis of sustainable new energy materials.

09 BIOMASS FUELS↗

DOE OSTI2020

Black Liquor Valorization by Using Marine Protist Thraustochytrium striatum and the Preliminary Metabolic Mechanism Study

Black liquor that contains various phenolic compounds from lignin solubilization has been the main byproduct of alkaline pretreatment of lignocellulosic biomass in the biorefinery. In this study, black liquor from alkaline pretreatment of corn stover was used as a sole carbon source for the cultivation of a marine protist, Thraustochytrium striatum. It was found that this strain can grow on black liquor and accumulate valuable products (e.g., fatty acids and carotenoids) simultaneously. Under optimal conditions (pH = 7 and NH 4 Cl = 2 g/L), the cell mass concentration reached 5.2 g/L with total aromatics decreased from 8.18 to 3.09 g/L within 7 day incubation. Fed-batch cultivation was adopted to increase the contents of total fatty acids and carotenoids to 13% and 0.24 mg/g dry cell mass, respectively. Although various compounds such as sugars and organic acids were detected in black liquor and consumed during microbial fermentation as carbon sources, lignin-derived compounds were identified as the major substrates for T. striatum fermentation. Of total aromatics consumed, monomers including p-coumaric acid, ferulic acid, vanillin, and syringaldehyde were observed to be consumed and converted while polymeric fragments were also depolymerized and degraded. Under optimal conditions, around 50% of the total aromatics was consumed. The dynamic changes of compounds in black liquor indicated that diverse metabolic processes were involved in black liquor degradation and utilization by T. striatum. A strong adaptation of T. striatum to a wide range of pH (3–9) was also observed during black liquor fermentation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗