Search NASA⌕ Search

Engineering topics

Puigh, Raymond J.

Publications and source records attributed to Puigh, Raymond J..

Fifty-Five Gallon Drum Standard Study [Slides]

This presentation covers a Fifty-Five Gallon Drum Standard Study. This lecture finds that decontamination and decommissioning and legacy wastes is similar across most Sites. Additionally, Information on legacy wastes vary with site and original waste generation date. Finally, this presentation concludes with the discovery that different goals and modeling assumptions lead to a wide range in fissile mass limits for 55-Gallon waste drums.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fifty-Five Gallon Drum Standard Study

Fifty-five gallon drums are routinely used within the U.S. for the storage and eventual disposal of fissionable materials as Transuranic or low-level waste. To support these operations, criticality safety evaluations are required. A questionnaire was developed and sent to selected Endusers at Hanford, Idaho National Laboratory, Lawrence Livermore National Laboratory, Oak Ridge and the Savannah River Site to solicit current practices. This questionnaire was used to gather information on the kinds of fissionable materials packaged into drums, the models used in performing criticality safety evaluations in support of operations involving these drums, and the limits and controls established for the handling and storage of these drums. The completed questionnaires were reviewed and clarifications solicited through individual communications with each Enduser to obtain more complete and consistent responses. All five sites have similar drum operations involving thousands to tens of thousands of fissionable material waste drums. The primary sources for these drums are legacy (prior operations) and decontamination and decommissioning wastes at all sites except Lawrence Livermore National Laboratory. The results from this survey and our review are discussed in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mining Integral Actinides Cross Sections from Reactor Data

A novel approach is being explored that involves extraction of integral cross-sections for actinides, based on measured concentrations. The effort is primarily focused on Hanford and Savannah River information. In the early days of reactor operation, reliance on product quality was measured with state-of-the-art chemical and radiological methods. Examples from Hanford reactor data showing a method to extract integral cross-sections and how relationships between actinides, as a function of exposure, can be used to validate present day burn-up and transmutation codes. The effort will yield cross-sections and other parameters of particular value to criticality safety engineers designing new facilities, equipment, and processes for the next generation fuel cycles and formulation of new American National Standard Institute/American Nuclear Society Standards.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗