Search NASA⌕ Search

Engineering topics

Puthirath, Anand B.

Publications and source records attributed to Puthirath, Anand B..

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Solution-processed tungsten diselenide as an inorganic hole transport material for moisture-stable perovskite solar cells in the n-i-p architecture

Some of the obstacles to the commercialization of perovskite solar cells (PSCs) are their long-term moisture stability and material cost of the constituent layers, such as the commonly used spiro-OMeTAD hole transport layer (HTL). Replacing the spiro-OMeTAD with low-cost inorganic hole transport materials (HTMs) are important to further elevate the attractiveness of PSCs for commercialization. Perovskite-compatible, solution-exfoliated two-dimensional (2D) transition metal dichalcogenides (TMDCs) are being considered as viable candidates for inorganic HTMs. We consider one such TMDC, WSe 2 which was chemically exfoliated using dichlorobenzene (DCB), a perovskite-compatible solvent, as it was integrated with triple cation perovskite absorbers within the solar cell stack. Here, the WSe 2 HTL required heat treatment processes to be maintained below 100°C in order to preserve the integrity of the underlying perovskite; despite this lower temperature post treatment process, the structural morphology of the film revealed its dense and pinhole-free nature. Temperature-dependent transport studies conducted on the WSe 2 film provided evidence of its semiconducting character and its ability to extract holes well from the underlying triple-cation Cs 0.05 FA 0.79 MA 0.16 PbI 2.45 Br 0.55 absorber. The inorganic HTL offered better environmental stability in moisture-rich environments of up to 60% relative humidity, in comparison to spiro-OMeTAD HTL-based devices which degraded faster as a result of pinholes

14 SOLAR ENERGY↗
DOE OSTI2024

An Impedance Humidity Sensor Based on CVD Grown WSe 2 2D Films

2D materials-based planar devices have been sought after for gas and humidity sensor applications owing to their high sensitivity due to their ultrathin nature and increased surface area. Herein, 2D WSe 2 films-based planner devices were fabricated to evaluate their performance for potential application in humidity sensors. The structure and morphology of the WSe 2 sensing films were studied by Raman spectroscopy, photoluminescence, optical microscopy, and scanning electron microscopy (SEM) techniques. The relative humidity-dependent sensing performances of the 2D WSe 2 films were evaluated using current–voltage (I–V), relative impedance, and complex total impedance (electrochemical impedance spectroscopy, EIS) techniques. This sensor showed a very stable and repeatable performance investigated over the period of 18 months. The response and recovery times of the WSe 2 -based impedance sensors were found to be 40 and 30 s, respectively. The WSe 2 sensor exhibits a 2 ± 1% minimum hysteresis at a lower humidity level (50% RH) and around 8 ± 2% maximum hysteresis at relative humidity level (70% RH). This value of hysteresis is in the acceptable range during the initial investigation of any material to explore its potential for application in humidity sensors. The density functional theory (DFT) analysis was performed with the interaction from water molecules of the WSe 2 sample for a better understanding of the sensing mechanism of devices.

2D- WSe2↗
DOE OSTI2024

Conductive surface states and Kondo exhaustion in insulating YbIr 3 Si 7

The interplay of Kondo screening and magnetic ordering in strongly correlated materials containing local moments is a subtle problem. Usually the number of conduction electrons per unit cell matches or exceeds the number of moments, and a Kondo-screened heavy Fermi liquid develops at low temperatures. Changing the pressure, magnetic field, or chemical doping can displace this heavy Fermi liquid in favor of a magnetically ordered state. Alternatively, Kondo singlet formation can be suppressed when the number of conduction electrons is small compared to the number of magnetic moments, known as the Kondo exhaustion scenario. Furthermore we report the discovery of such an “exhausted” Kondo lattice material, YbIr 3 Si 7 , where the bulk electrical conductivity tends to zero in the antiferromagnetic state below the Néel temperature T N = 4.1 K, as all the free carriers are consumed in the formation of Kondo singlets. By contrast, the surface is conducting, as the Yb 3+ ions relax into larger nonmagnetic Yb 2+ in the presence of reduced chemical pressure, which shifts the chemical potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

VO 2 phase change electrodes in Li-ion batteries

Use of electrode materials that show phase change behavior and hence drastic changes in electrochemical activity during operation has not been explored for Li-ion batteries. Here we demonstrate the vanadium oxide (VO 2 ) cathode that undergoes a metal–insulator transition due to the first-order structural phase transition at an accessible temperature of 68 °C for battery operation. Using a suitable electrolyte operable across the phase transition range and compatible with vanadium oxide cathodes, we studied the effect of cathode active material structural changes on lithium insertion followed by the electrochemical characteristics above and below the phase transition temperature. The high-temperature VO 2 phase shows significantly improved capacitance, enhanced current rate capabilities, improved electrical conductivity and lithium-ion diffusivity compared to the insulating low temperature phase. In conclusion, this opens up new avenues for electrode design, allowing manipulation of electrochemical reactions around phase transition temperatures, and in particular enhancing electrochemical properties at elevated temperatures contrary to the existing class of battery chemistries that lead to performance deterioration at elevated temperatures.

25 ENERGY STORAGE↗
DOE OSTI2023

Structural, optical, and thermal properties of BN thin films grown on diamond via pulsed laser deposition

Heterostructures based on ultrawide-bandgap (UWBG) semiconductors (bandgap > 4.0 eV), such as BN and diamond, hold significant importance for the development of high-power electronics in the next generation. However, achieving in situ heteroepitaxy of BN/diamond or vice versa remains exceptionally challenging due to the complex growth kinetics involved. In this work, we grew BN thin film on (100) single-crystal diamonds using pulsed laser deposition and investigated its structural, magnetic, optical, and thermal properties. Throughout this study, the structural analyses confirmed the growth of BN films, which exhibited diamagnetic behavior at room temperature. Notably, the film demonstrated anisotropic refractive index characteristics within the visible-to-near-infrared wavelength range. The room-temperature cross-plane thermal conductivity of BN is 1.53 ± 0.77 W/mK, while the thermal conductance of the BN/diamond interface is 20 ± 2 MW/m 2 ⁢K. These findings have significant implications for a range of device applications based on UWBG BN/diamond heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Non-Linear Optics at Twist Interfaces in h-BN/SiC Heterostructures

Understanding the emergent electronic structure in twisted atomically thin layers has led to the exciting field of twistronics. However, practical applications of such systems are challenging since the specific angular correlations between the layers must be precisely controlled and the layers have to be single crystalline with uniform atomic ordering. Here, in this work, an alternative, simple, and scalable approach is suggested, where nanocrystalline two-dimensional (2D) film on 3D substrates yields twisted-interface-dependent properties. Ultrawide-bandgap hexagonal boron nitride (h-BN) thin films are directly grown on high in-plane lattice mismatched wide-bandgap silicon carbide (4H-SiC) substrates to explore the twist-dependent structure-property correlations. Concurrently, nanocrystalline h-BN thin film shows strong non-linear second-harmonic generation and ultra-low cross-plane thermal conductivity at room temperature, which are attributed to the twisted domain edges between van der Waals stacked nanocrystals with random in-plane orientations. First-principles calculations based on time-dependent density functional theory manifest strong even-order optical nonlinearity in twisted h-BN layers. This work unveils that directly deposited 2D nanocrystalline thin film on 3D substrates could provide easily accessible twist-interfaces, therefore enabling a simple and scalable approach to utilize the 2D-twistronics integrated in 3D material devices for next-generation nanotechnology.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unravelling the room temperature growth of two-dimensional h-BN nanosheets for multifunctional applications

The room temperature growth of two-dimensional van der Waals (2D-vdW) materials is indispensable for state-of-the-art nanotechnology. Low temperature growth supersedes the requirement of elevated growth temperatures accompanied with high thermal budgets. Moreover, for electronic applications, low or room temperature growth reduces the possibility of intrinsic film-substrate interfacial thermal diffusion related deterioration of the functional properties and the consequent deterioration of the device performance. Here, we demonstrated the growth of ultrawide-bandgap boron nitride (BN) at room temperature by using the pulsed laser deposition (PLD) process, which exhibited various functional properties for potential applications. Comprehensive chemical, spectroscopic and microscopic characterizations confirmed the growth of ordered nanosheet-like hexagonal BN (h-BN). Functionally, the nanosheets show hydrophobicity, high lubricity (low coefficient of friction), and a low refractive index within the visible to near-infrared wavelength range, and room temperature single-photon quantum emission. In conclusion, our work unveils an important step that brings a plethora of potential applications for these room temperature grown h-BN nanosheets as the synthesis can be feasible on any given substrate, thus creating a scenario for “h-BN on demand” under a frugal thermal budget.

2D h-BN↗
DOE OSTI2022

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Realizing solution-processed heterostructures is a long-enduring challenge in halide perovskites because of solvent incompatibilities that disrupt the underlying layer. By leveraging the solvent dielectric constant and Gutmann donor number, we could grow phase-pure two-dimensional (2D) halide perovskite stacks of the desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. Characterization reveals a 3D–2D transition region of 20 nanometers mainly determined by the roughness of the bottom 3D layer. Thickness dependence of the 2D perovskite layer reveals the anticipated trends for n-i-p and p-i-n architectures, which is consistent with band alignment and carrier transport limits for 2D perovskites. Here we measured a photovoltaic efficiency of 24.5%, with exceptional stability of T 99 (time required to preserve 99% of initial photovoltaic efficiency) of >2000 hours, implying that the 3D/2D bilayer inherits the intrinsic durability of 2D perovskite without compromising efficiency.

14 SOLAR ENERGY↗
DOE OSTI2022

Low temperature CVD growth of WSe 2 enabled by moisture-assisted defects in the precursor powder

Two-dimensional transition metal dichalcogenides (TMDs) have been proposed for a wide variety of applications, such as neuromorphic computing, flexible field effect transistors, photonics, and solar cells, among others. However, for most of these applications to be feasible, it is necessary to integrate these materials with the current existing silicon technology. Although chemical vapor deposition is a promising method for the growth of high-quality and large-area TMD crystals, the high temperatures necessary for the growth make this technique incompatible with the processes used in the semiconductor industry. Herein, we demonstrate the possibility of low-temperature growth of TMDs, using tungsten selenide (WSe 2 ) as a model, by simply using moisture-assisted defective tungsten oxide (WO 3 ) precursor powders during the growth of these materials. Density functional theory calculations reveal the mechanism by which moisture promotes the defect formation on the precursor crystal structure and how it dictates the reduction of the temperature of the growth. The results were compared with the standard growth at high temperatures and with a precursor mixture with alkali salts to show the high quality of the WSe 2 grown at temperatures as low as 550 °C. To conclude, the work improves the understanding of nucleation and growth mechanisms of WSe 2 at low temperatures and provides a useful strategy for the growth of TMDs at temperatures required for the back-end-of-line compatibility with current silicon technology.

2D materials↗
DOE OSTI2022

Properties and device performance of BN thin films grown on GaN by pulsed laser deposition

Wide and ultrawide-bandgap semiconductors lie at the heart of next-generation high-power, high-frequency electronics. Here, in this paper, we report the growth of ultrawide-bandgap boron nitride (BN) thin films on wide-bandgap gallium nitride (GaN) by pulsed laser deposition. Comprehensive spectroscopic (core level and valence band x-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and Raman) and microscopic (atomic force microscopy and scanning transmission electron microscopy) characterizations confirm the growth of BN thin films on GaN. Optically, we observed that the BN/GaN heterostructure is second-harmonic generation active. Moreover, we fabricated the BN/GaN heterostructure-based Schottky diode that demonstrates rectifying characteristics, lower turn-on voltage, and an improved breakdown capability (~234 V) as compared to GaN (~168 V), owing to the higher breakdown electrical field of BN. Our approach is an early step toward bridging the gap between wide and ultrawide-bandgap materials for potential optoelectronics as well as next-generation high-power electronics.

42 ENGINEERING↗
DOE OSTI2022

Incommensurate magnetic orders and topological Hall effect in the square-net centrosymmetric EuGa 2 Al 2 system

Neutron diffraction on the centrosymmetric square-net magnet EuGa 2 Al 2 reveals multiple incommensurate magnetic states (AFM1, 2, 3) in zero field. In applied field, a new magnetic phase (A) is identified from magnetization and transport measurements, bounded by two of the μ 0 H=0 incommensurate magnetic phases (AFM1, helical, and AFM3, cycloidal) with different moment orientations. Moreover, magnetotransport measurements indicate the presence of a topological Hall effect, with maximum values centered in the A phase. Together, these results render EuGa 2 Al 2 a material with noncoplanar or topological spin texture in applied field. X-ray diffraction reveals an out-of-plane (OOP) charge density wave (CDW) below T CDW ~50 K while the magnetic propagation vector lies in plane below T N =19.5 K. Together these data point to a new route to realizing in-plane noncollinear spin textures through an OOP CDW. In turn, these noncollinear spin textures may be unstable against the formation of topological spin textures in an applied field.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High Throughput Data-Driven Design of Laser-Crystallized 2D MoS 2 Chemical Sensors: A Demonstration for NO 2 Detection

High throughput characterization and processing techniques are becoming increasingly necessary to navigate multivariable, data-driven design challenges for sensors and electronic devices. For two-dimensional materials, device performance is highly dependent upon a vast array of material properties including the number of layers, lattice strain, carrier concentration, defect density, and grain structure. In this work, laser crystallization was used to locally pattern and transform hundreds of regions of amorphous MoS 2 thin films into 2D 2H-MoS 2 . Here a high throughput Raman spectroscopy approach was subsequently used to assess the process-dependent structural and compositional variations for each illuminated region, yielding over 6000 distinct nonresonant, resonant, and polarized Raman spectra. The rapid generation of a comprehensive library of structural and compositional data elucidated important trends between structure–property processing relationships involving laser-crystallized MoS 2 , including the relationships between grain size, grain orientation, and intrinsic strain. Moreover, extensive analysis of structure/property relationships allowed for intelligent design and evaluation of major contributions to device performance in MoS 2 chemical sensors. In particular, it is found that NO 2 sensor performance is strongly dependent on the orientation of the MoS 2 grains relative to the crystal plane.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Scale-Enhanced Magnetism in Exfoliated Atomically Thin Magnetite Sheets

The discovery of ferromagnetism in atomically thin layers at room temperature widens the prospects of 2D materials for device applications. Recently, two independent experiments demonstrated magnetic ordering in two dissimilar 2D systems, CrI 3 and Cr 2 Ge 2 Te 6 , at low temperatures and in VSe 2 at room temperature, but observation of intrinsic room-temperature magnetism in 2D materials is still a challenge. Here a transition at room temperature that increases the magnetization in magnetite while thinning down the bulk material to a few atom-thick sheets is reported. DC magnetization measurements prove ferrimagnetic ordering with increased magnetization and density functional theory calculations ascribe their origin to the low dimensionality of the magnetite layers. Additionally, surface energy calculations for different cleavage planes in passivated magnetite crystal agree with the experimental observations of obtaining 2D sheets from non-van der Waals crystals.

2D Magnetism↗
DOE OSTI2020

2D Electrets of Ultrathin MoO 2 with Apparent Piezoelectricity

Since graphene, a variety of 2D materials have been fabricated in a quest for a tantalizing combination of properties and desired physiochemical behavior. 2D materials that are piezoelectric, i.e., that allow for a facile conversion of electrical energy into mechanical and vice versa, offer applications for sensors, actuators, energy harvesting, stretchable and flexible electronics, and energy storage, among others. Unfortunately, materials must satisfy stringent symmetry requirements to be classified as piezoelectric. Here, 2D ultrathin single-crystal molybdenum oxide (MoO 2 ) flakes that exhibit unexpected piezoelectric-like response are fabricated, as MoO 2 is centrosymmetric and should not exhibit intrinsic piezoelectricity. However, it is demonstrated that the apparent piezoelectricity in 2D MoO 2 emerges from an electret-like behavior induced by the trapping and stabilization of charges around defects in the material. Arguably, the material represents the first 2D electret material and suggests a route to artificially engineer piezoelectricity in 2D crystals. Specifically, it is found that the maximum out-of-plane piezoresponse is 0.56 pm V -1 , which is as strong as that observed in conventional 2D piezoelectric materials. The charges are found to be highly stable at room temperature with a trapping energy barrier of ≈2 eV.

36 MATERIALS SCIENCE↗