Search NASA⌕ Search

Engineering topics

Qin, Yi

Publications and source records attributed to Qin, Yi.

At least 19 records

Evaluation of E3SM Simulated Aerosols and Aerosol‐Cloud Interactions Across GCM and Convection‐Permitting Scales

This paper introduces an Earth system modeling testbed for predicting aerosols and aerosol‐cloud interactions (ACIs) at convection‐permitting scales. Using the Energy Exascale Earth System Model (E3SM) version 2 with a four‐mode Modal Aerosol Module, we conduct simulations at 3.25 km resolution on a regionally refined mesh (RRM) across four regions with distinct aerosol and cloud regimes. Results are compared with the standard 100 km E3SM configuration and evaluated against satellite, aircraft, and ground‐based observations. We find that increasing model resolution improves heavy precipitation simulation but amplifies positive bias in light drizzle at coarse resolution. These resolution‐induced changes affect cloud and aerosol properties to varying degrees across regions. Generally, cloud cover and liquid water path (LWP) show better agreement with satellite retrievals at 3.25 km, though surface‐based comparisons suggest otherwise. Aerosol composition remains poorly represented at both resolutions. The RRM increases Aitken mode aerosol number concentrations via enhanced new particle formation. However, accumulation mode aerosols are decreased at higher resolution as aerosol removals become more efficient. This partially contributes to fewer cloud condensation nuclei (CCN) and lower cloud droplet number concentrations (N d ), which produces larger model biases in some scenarios. These findings suggest that solely increasing horizontal resolution to kilometer scales is insufficient to broadly improve aerosol and cloud predictions without concurrent advancements in physical and chemical process representations. Nonetheless, the RRM moderately improves key ACI relationships such as CCN‐N d correlation, reflecting enhanced aerosol activation representation. The LWP‐N d relationship is also better captured by RRM, suggesting a better characterization of LWP adjustment.

Huang, Meng [Pacific Northwest National Laboratory↗

Strong, ductile, and hierarchical hetero-lamellar-structured alloys through microstructural inheritance and refinement

The strength−ductility trade-off exists ubiquitously, especially in brittle intermetallic-containing multiple principal element alloys (MPEAs), where the intermetallic phases often induce premature failure leading to severe ductility reduction. Hierarchical heterogeneities represent a promising microstructural solution to achieve simultaneous strength−ductility enhancement. However, it remains fundamentally challenging to tailor hierarchical heterostructures using conventional methods, which often rely on costly and time-consuming processing. Here, we report a multiscale microstructural inheritance and refinement strategy to process “structural hierarchy precursors” in as-cast heterogeneous Al 0.7 CoCrFeNi MPEAs, which lead directly to a hierarchical hetero-lamellar structure (HLS) after simple rolling and annealing. Interestingly, it takes only 10 min of annealing time, two orders of magnitude less than that required to render the state-of-the-art properties during conventional processing of Al 0.7 CoCrFeNi, for us to achieve record-high strength−ductility combinations via the hierarchical HLS design that sequentially stimulates multiple unusual deformation and reinforcement mechanisms. In particular, the HLS-enabled high hetero-deformation-induced (HDI) internal stress triggers profuse <111>-type dislocations on over five independent slip systems in the supposedly brittle intermetallic phase and activates extensive stacking faults (SFs) and nanotwinning in the adjoining soft phase with a rather high SF energy. These unexpected, dynamically reinforcing hetero-deformation mechanisms across multiple length scales facilitate high sustained HDI strain hardening, along with a salient microcrack-mediated extrinsic ductilization effect, suggesting that the proposed microstructural inheritance and refinement strategy provides an efficient, fast, and low-cost approach to overcome the strength−ductility trade-off in a broad range of structural materials.

Science & Technology - Other Topics↗

Assessing Radiative Feedbacks and Their Contribution to the Arctic Amplification Measured by Various Metrics

Arctic amplification (AA), characterized by a more rapid surface air temperature (SAT) warming in the Arctic than the global average, is a major feature of global climate warming. Various metrics have been used to quantify AA based on SAT anomalies, trends, or variability, and they can yield quite different conclusions regarding the magnitude and temporal patterns of AA. This study examines and compares various AA metrics for their temporal consistency in the region north of 70°N from the early twentieth to the early 21st century using observational data and reanalysis products. We also quantify contributions of different radiative feedback mechanisms to AA based on short-term climate variability in reanalysis and model data using the Kernel-Gregory approach. Albedo and lapse rate feedbacks are positive and comparable, with albedo feedback being the leading contributor for all AA metrics. The net cloud feedback, which has large uncertainties, depends strongly on the data sets and AA metrics used. By quantifying the influence of internal variability on AA and related feedbacks based on global climate model ensemble simulations, we find that water vapor and cloud feedbacks are most heavily affected by internal variability.

54 ENVIRONMENTAL SCIENCES↗

Near-global summer circulation response to the spring surface temperature anomaly in Tibetan Plateau –– the GEWEX/LS4P first phase experiment

Subseasonal to seasonal (S2S) prediction of droughts and floods is one of the major challenges of weather and climate prediction. Recent studies suggest that the springtime land surface temperature/subsurface temperature (LST/SUBT) over the Tibetan Plateau (TP) can be a new source of S2S predictability. The project “Impact of Initialized Land Surface Temperature and Snowpack on Subseasonal to Seasonal Prediction (LS4P)” was initiated to study the impact of springtime LST/SUBT anomalies over high mountain areas on summertime precipitation predictions. The present work explores the simulated global scale response of the atmospheric circulation to the springtime TP land surface cooling by 16 current state-of-the-art Earth System Models (ESMs) participating in the LS4P Phase I (LS4P-I) experiment. The LS4P-I results show, for the first time, that springtime TP surface anomalies can modulate a persistent quasi-barotropic Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train from the TP via the northeast Asia and Bering Strait to the western part of the North America, along with the springtime westerly jet from TP across the whole North Pacific basin. The TRC wave train modulated by the TP thermal anomaly play a critical role on the early summer surface air temperature and precipitation anomalies in the regions along the wave train, especially over the northwest North America and the southern Great Plains. The participant models that fail in capturing the TRC wave train greatly under-predict climate anomalies in reference to observations and the successful models. These results suggest that the TP LST/SUBT anomaly via the TRC wave train is the first order source of the S2S variability in the regions mentioned. Furthermore, the TP surface temperature anomaly can influence the Southern Hemispheric circulation by generating cross-equator wave trains. However, the simulated propagation pathways from the TP into the Southern Hemisphere show large inter-model differences. More dynamical understanding of the TRC wave train as well as its cross-equator propagation into the Southern Hemisphere will be explored in the newly launched LS4P phase II experiment.

54 ENVIRONMENTAL SCIENCES↗

Improved subseasonal-to-seasonal precipitation prediction of climate models with nudging approach for better initialization of Tibetan Plateau-Rocky Mountain Circumglobal wave train and land surface conditions

Abstract Reliable subseasonal-to-seasonal (S2S) precipitation prediction is highly desired due to the great socioeconomical implications, yet it remains one of the most challenging topics in the weather/climate prediction research area. As part of the Impact of Initialized Land Temperature and Snowpack on Sub-seasonal to Seasonal Prediction (LS4P) project of the Global Energy and Water Exchanges (GEWEX) program, twenty-one climate models follow the LS4P protocol to quantify the impact of the Tibetan Plateau (TP) land surface temperature/subsurface temperature (LST/SUBT) springtime anomalies on the global summertime precipitation. We find that nudging towards reanalysis winds is crucial for climate models to generate atmosphere and land surface initial conditions close to observations, which is necessary for meaningful S2S applications. Simulations with nudged initial conditions can better capture the summer precipitation responses to the imposed TP LST/SUBT spring anomalies at hotspot regions all over the world. Further analyses show that the enhanced S2S prediction skill is largely attributable to the substantially improved initialization of the Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train pattern in the atmosphere. This study highlights the important role that initial condition plays in the S2S prediction and suggests that data assimilation technique (e.g., nudging) should be adopted to initialize climate models to improve their S2S prediction.

54 ENVIRONMENTAL SCIENCES↗

Larger Cloud Liquid Water Enhances Both Aerosol Indirect Forcing and Cloud Radiative Feedback in Two Earth System Models

Previous studies have noticed that the Coupled Model Intercomparison Project Phase 6 (CMIP6) models with a stronger cooling from aerosol-cloud interactions (ACI) also have an enhanced warming from positive cloud feedback, and these two opposing effects are counter-balanced in simulations of the historical period. However, reasons for this anti-correlation are less explored. In this study, we perturb the cloud ice microphysical processes to obtain cloud liquid of varying amounts in two Earth System Models (ESMs). We find that the model simulations with a larger liquid water path (LWP) tend to have a stronger cooling from ACI and a stronger positive cloud feedback. More liquid clouds in the mean-state present more opportunities for anthropogenic aerosol perturbations and also weaken the negative cloud feedback at middle to high latitudes. This work, from a cloud state perspective, emphasizes the influence of the mean-state LWP on effective radiative forcing due to ACI (ERF ACI ).

54 ENVIRONMENTAL SCIENCES↗

Causes of Reduced Climate Sensitivity in E3SM From Version 1 to Version 2

The effective climate sensitivity in the Department of Energy's Energy Exascale Earth System Model (E3SM) has decreased from 5.3 K in version 1 to 4.0 K in version 2. This reduction is mainly due to a weaker positive cloud feedback that leads to a stronger negative radiative feedback. Present-day atmosphere-only experiments with uniform 4 K sea surface temperature warming are used to separate the contributions of individual model modifications to the reduced cloud feedback. We find that the reduced cloud feedback is mostly driven by changes over the tropical marine low cloud regime, mainly related to a new trigger function for the deep convection scheme and modifications in the cloud microphysics scheme. The new trigger function helps weaken the low cloud reduction by increasing the cloud water detrainment at low levels from deep convection under warming. Changes to the formula of autoconversion rate from liquid to rain and an introduced minimum cloud droplet number concentration threshold in cloud microphysical calculations help sustain clouds against dissipation by suppressing precipitation generation with warming. In the midlatitudes, the increased Wegener-Bergeron-Findeisen (WBF) efficiency strongly reduces present-day liquid water and leads to a stronger negative cloud optical depth feedback. The reduced trade cumulus cloud feedback in v2 is closer to estimates from recent observational and large-eddy modeling studies but might not be due to the right physical reasons. The reduced mid-latitude cloud feedback may be more plausible because more realistic present-day mixed-phase clouds are produced through the change in the WBF efficiency.

54 ENVIRONMENTAL SCIENCES↗

Remote effects of Tibetan Plateau spring land temperature on global subseasonal to seasonal precipitation prediction and comparison with effects of sea surface temperature: the GEWEX/LS4P Phase I experiment

The prediction skill for precipitation anomalies in late spring and summer months—a significant component of extreme climate events—has remained stubbornly low for years. This paper presents a new idea that utilizes information on boreal spring land surface temperature/subsurface temperature (LST/SUBT) anomalies over the Tibetan Plateau (TP) to improve prediction of subsequent summer droughts/floods over several regions over the world, East Asia and North America in particular. The work was performed in the framework of the GEWEX/LS4P Phase I (LS4P-I) experiment, which focused on whether the TP LST/SUBT provides an additional source for subseasonal-to-seasonal (S2S) predictability. The summer 2003, when there were severe drought/flood over the southern/northern part of the Yangtze River basin, respectively, has been selected as the focus case. With the newly developed LST/SUBT initialization method, the observed surface temperature anomaly over the TP has been partially produced by the LS4P-I model ensemble mean, and 8 hotspot regions in the world were identified where June precipitation is significantly associated with anomalies of May TP land temperature. Consideration of the TP LST/SUBT effect has produced about 25–50% of observed precipitation anomalies in most hotspot regions. The multiple models have shown more consistency in the hotspot regions along the Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train. The mechanisms for the LST/SUBT effect on the 2003 drought over the southern part of the Yangtze River Basin are discussed. For comparison, the global SST effect has also been tested and 6 regions with significant SST effects were identified in the 2003 case, explaining about 25–50% of precipitation anomalies over most of these regions. This study suggests that the TP LST/SUBT effect is a first-order source of S2S precipitation predictability, and hence it is comparable to that of the SST effect. With the completion of the LS4P-I, the LS4P-II has been launched and the LS4P-II protocol is briefly presented.

54 ENVIRONMENTAL SCIENCES↗

Understanding Changes in Cloud Simulations from E3SM Version 1 to Version 2

This study documents clouds simulated by the Energy Exascale Earth System Model (E3SM) version 2 (E3SMv2) and attempts to understand what causes the model behavior change in clouds relative to E3SMv1. This is done by analyzing the last 30-year (1985–2014) data from the 165-year historical simulations using E3SMv1 and v2 and four sensitivity tests to isolate the impact of changes in model parameter choices in its turbulence, shallow convection, and cloud macrophysics parameterization (CLUBB), microphysical parameterization (MG2), and deep convection scheme (ZM), as well as model physics changes in convective triggering. It is shown that E3SMv2 significantly improves the simulation of subtropical coastal stratocumulus clouds (Sc) and clouds with optical depth larger than 3.6 over the stratocumulus to cumulus transition regimes, where Shortwave Cloud Radiative Effect (SWCRE) is also improved, and the Southern Ocean (SO) while seeing an overall slight degradation in low clouds over other tropical and subtropical oceans. The better performance in E3SMv1 over those regions is partially due to error compensation between its simulated optically thin and intermediate low clouds for which E3SMv2 actually improves simulation of optically intermediate low clouds. Sensitivity tests indicate that the changes in low clouds are primarily due to the tuning made in CLUBB. The impact of the ZM tuning is mainly on optically intermediate and thick high clouds, contributing to improved SWCRE and Longwave Cloud Radiative Effect (LWCRE). The impact of the MG2 tuning and the new convective trigger is primarily on the high latitudes and the Southern Ocean (SO). They have a relatively smaller impact on clouds than do the CLUBB and ZM tunings. This study offers additional insights about clouds simulated in E3SMv2 by utilizing multiple data sets and the COSP diagnostic tool as well as through sensitivity tests. The improved understanding will benefit the future E3SM developments.

54 ENVIRONMENTAL SCIENCES↗

The DOE E3SM Model Version 2: Overview of the Physical Model and Initial Model Evaluation

Abstract This work documents version two of the Department of Energy's Energy Exascale Earth System Model (E3SM). E3SMv2 is a significant evolution from its predecessor E3SMv1, resulting in a model that is nearly twice as fast and with a simulated climate that is improved in many metrics. We describe the physical climate model in its lower horizontal resolution configuration consisting of 110 km atmosphere, 165 km land, 0.5° river routing model, and an ocean and sea ice with mesh spacing varying between 60 km in the mid‐latitudes and 30 km at the equator and poles. The model performance is evaluated with Coupled Model Intercomparison Project Phase 6 Diagnosis, Evaluation, and Characterization of Klima simulations augmented with historical simulations as well as simulations to evaluate impacts of different forcing agents. The simulated climate has many realistic features of the climate system, with notable improvements in clouds and precipitation compared to E3SMv1. E3SMv1 suffered from an excessively high equilibrium climate sensitivity (ECS) of 5.3 K. In E3SMv2, ECS is reduced to 4.0 K which is now within the plausible range based on a recent World Climate Research Program assessment. However, a number of important biases remain including a weak Atlantic Meridional Overturning Circulation, deficiencies in the characteristics and spectral distribution of tropical atmospheric variability, and a significant underestimation of the observed warming in the second half of the historical period. An analysis of single‐forcing simulations indicates that correcting the historical temperature bias would require a substantial reduction in the magnitude of the aerosol‐related forcing.

54 ENVIRONMENTAL SCIENCES↗

On the Correspondence Between Atmosphere-Only and Coupled Simulations for Radiative Feedbacks and Forcing From CO 2

Atmosphere-only experiments are widely used to investigate climate feedbacks simulated in more computationally expensive fully coupled global climate model simulations. We confirm that this remains a valid approach by comparing the radiative feedbacks and forcing between coupled and atmosphere-only simulations for the latest models taking part in the 6th phase of the Coupled Model Intercomparison Project (CMIP6). For global-mean cloud feedbacks, we find a better than previously known correspondence between these experiments, which applies even to the response of individual cloud properties (amount, altitude, and optical depth) and holds even when considering atmosphere-only simulations of only 1 yr duration. For regional cloud feedbacks, the correspondence between the two experiments is generally present at every geographic location except for the tropical Pacific but takes longer experiments to reveal. For the lapse rate and surface albedo feedbacks, the correspondence between the two experiments is weaker due to the non-uniform warming pattern and loss of sea ice in the coupled experiment. For the across-model relationship between 4xCO 2 effective radiative forcing and feedback, we find a different behavior across experiments in CMIP6 than in CMIP5, casting doubt on the physical significance of previous results that highlighted an anti-correlation between the two quantities. Overall, these results confirm the utility of atmosphere-only experiments particularly to study cloud feedbacks, which are the dominant source of inter-model spread in climate sensitivity.

58 GEOSCIENCES↗

Evaluating Climate Models’ Cloud Feedbacks Against Expert Judgment

Abstract The persistent and growing spread in effective climate sensitivity (ECS) across global climate models necessitates rigorous evaluation of their cloud feedbacks. Here we evaluate several cloud feedback components simulated in 19 climate models against benchmark values determined via an expert synthesis of observational, theoretical, and high‐resolution modeling studies. We find that models with smallest feedback errors relative to these benchmark values generally have moderate total cloud feedbacks (0.4–0.6 W m −2 K −1 ) and ECS (3–4 K). Those with largest errors generally have total cloud feedback and ECS values that are too large or too small. Models tend to achieve large positive total cloud feedbacks by having several cloud feedback components that are systematically biased high rather than by having a single anomalously large component, and vice versa. In general, better simulation of mean‐state cloud properties leads to stronger but not necessarily better cloud feedbacks. The Python code base provided herein could be applied to developmental versions of models to assess cloud feedbacks and cloud errors and place them in the context of other models and of expert judgment in real‐time during model development.

58 GEOSCIENCES↗

Improvement of the Biosynthesis of Resveratrol in Endophytic Fungus (Alternaria sp. MG1) by the Synergistic Effect of UV Light and Oligomeric Proanthocyanidins

Resveratrol, a natural polyphenol compound with multiple bioactivities, is widely used in food and pharmaceutical industry. Endophytic fungus Alternaria sp. MG1, as a native producer of resveratrol, shows increasing potential application. However, strategies for improvement of the biosynthesis of resveratrol in this species are still scarce. In this study, different elicitors were used to investigate their effect on the biosynthesis of resveratrol in MG1 and the induction mechanism. Ultrasound and sodium butyrate had no effect and slight inhibition on the resveratrol production and related gene expression, respectively. UV radiation and co-culture with Phomopsis sp. XP-8 significantly promoted the biosynthesis of resveratrol with the highest production (240.57μg/l) coming from UV 20min. Co-culture altered the profiles of secondary metabolites in MG1 by promoting and inhibiting the synthesis of stilbene and lignin compounds, respectively, and generating new flavonoids ((+/−)-taxifolin, naringin, and (+)-catechin). Oligomeric proanthocyanidins (OPC) also showed an obviously positive influence, leading to an increase in resveratrol production by 10 to 60%. Two calcium-dependent protein kinases (CDPK) were identified, of which CDPK1 was found to be an important regulatory factor of OPC induction. Synergistic treatment of UV 20min and 100μm OPC increased the production of resveratrol by 70.37% compared to control and finally reached 276.31μg/l.

Lu, Yao↗

Impact of Initialized Land Surface Temperature and Snowpack on Subseasonal to Seasonal Prediction Project, Phase I (LS4P-I): organization and experimental design

Subseasonal-to-seasonal (S2S) prediction, especially the prediction of extreme hydroclimate events such as droughts and floods, is not only scientifically challenging, but also has substantial societal impacts. Motivated by preliminary studies, the Global Energy and Water Exchanges (GEWEX)/Global Atmospheric System Study (GASS) has launched a new initiative called “Impact of Initialized Land Surface Temperature and Snowpack on Subseasonal to Seasonal Prediction” (LS4P) as the first international grass-roots effort to introduce spring land surface temperature (LST)/subsurface temperature (SUBT) anomalies over high mountain areas as a crucial factor that can lead to significant improvement in precipitation prediction through the remote effects of land–atmosphere interactions. LS4P focuses on process understanding and predictability, and hence it is different from, and complements, other international projects that focus on the operational S2S prediction. More than 40 groups worldwide have participated in this effort, including 21 Earth system models, 9 regional climate models, and 7 data groups.

54 ENVIRONMENTAL SCIENCES↗

Improving Convection Trigger Functions in Deep Convective Parameterization Schemes Using Machine Learning

Abstract Deficiencies in convection trigger functions, used in deep convection parameterizations in General Circulation Models (GCMs), have critical impacts on climate simulations. A novel convection trigger function is developed using the machine learning (ML) classification model XGBoost. The large‐scale environmental information associated with convective events is obtained from the long‐term constrained variational analysis forcing data from the Atmospheric Radiation Measurement (ARM) program at its Southern Great Plains (SGP) and Manaus (MAO) sites representing, respectively, continental mid‐latitude and tropical convection. The ML trigger is separately trained and evaluated per site, and jointly trained and evaluated at both sites as a unified trigger. The performance of the ML trigger is compared with four convective trigger functions commonly used in GCMs: dilute convective available potential energy (CAPE), undilute CAPE, dilute dynamic CAPE (dCAPE), and undilute dCAPE. The ML trigger substantially outperforms the four CAPE‐based triggers in terms of the F 1 score metric, widely used to estimate the performance of ML methods. The site‐specific ML trigger functions can achieve, respectively, 91% and 93% F 1 scores at SGP and MAO. The unified trigger also has a 91% F 1 score, with virtually no degradation from the site‐specific training, suggesting the potential of a global ML trigger function. The ML trigger alleviates a GCM deficiency regarding the overprediction of convection occurrence, offering a promising improvement to the simulation of the diurnal cycle of precipitation. Furthermore, to overcome the black box issue of the ML methods, insights derived from the ML model are discussed, which may be leveraged to improve traditional CAPE‐based triggers.

54 ENVIRONMENTAL SCIENCES↗

Investigation of ablation of thin foil aluminum ribbon array at 1.5 MA

We present experimental studies of initiation and ablation of a thin foil aluminum ribbon array at the 1.5 MA current level. In contrast to the previous work, we employ ribbon arrays with different ribbon gap parameters to investigate how this affects plasma initiation and foil ablation. Gated narrowband ultraviolet imaging indicated that the current was disorderly distributed at early period of discharge. But later on, it became axially stable and azimuthally symmetrical even for load with a gap as small as 0.1 mm. Using magnetic field probes installed inside and outside the array, we also observed that precursor current at positions with a distance of less than 2.7 mm to the central axis for 4-mm-radius arrays decreased when ribbon gap became small. Results of 0.2 mm gap ribbon array showed an evidence that ribbons can be merged. These observations imply that thin foil ribbon arrays may have potential applications in z-pinch experiments on large scale pulsed power facilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗