Search NASA⌕ Search

Engineering topics

Qu, Kenan

Publications and source records attributed to Qu, Kenan.

Focusability in the multi-pump Raman amplification of short laser pulses

Spatially combining multiple strong laser beams is a promising concept for achieving ultrahigh laser intensities. Proof-of-principle experiments have been conducted at the National Ignition Facility to report a combination of up to 20 pulses with high energy conversion efficiency. However, the combination process might damage the seed focusability due to mismatch of the seed and pump wavefronts. Here, we investigate the effect of the finite pump beam size on the focusability of the seed pulse. We propose an approach to retain and even improve the seed focusability by specifically arranging multiple pump beams. The results are demonstrated by the numerical solution of coupled nonlinear Schrödinger equations. Our findings also apply to seed amplification by filamented pump pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Creating pair plasmas with observable collective effects

Although existing technology cannot yet directly produce fields at the Schwinger level, experimental facilities can already explore strong-field QED phenomena by taking advantage of the Lorentz boost of energetic electron beams. Recent studies show that QED cascades can create electron-positron pairs at sufficiently high density to exhibit collective plasma effects. Signatures of the collective pair plasma effects can appear in exquisite detail through plasmainduced frequency upshifts and chirps in the laser spectrum. Maximizing the magnitude of the QED plasma signature demands high pair density and low pair energy, which suits the configuration of colliding an over 10 18 Jm -3 energy-density electron beam with a 10 22 -10 23 Wcm -2 intensity laser pulse. The collision creates pairs that have a large plasma frequency, made even larger as they slow down or reverse direction due to both the radiation reaction and laser pressure. This paper explains at a tutorial level the key properties of the QED cascades and laser frequency upshift, and at the same time finds the minimum parameters that can be used to produce observable QED plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collective plasma effects of electron–positron pairs in beam-driven QED cascades

Understanding the interplay of strong-field QED and collective plasma effects is important for explaining extreme astrophysical environments like magnetars. It has been shown that QED pair plasma can be produced and observed by passing a relativistic electron beam through an intense laser field. This work presents in detail multiple sets of 3D QED-particle-in-cell simulations to show the creation of pair plasma in the QED cascade. The beam driven method enables a high pair particle density and also a low particle Lorentz factor, which both play equal roles on exhibiting large collective plasma effects. Finite laser frequency upshift is observed with both ideal parameters (24 PW laser colliding with a 300 GeV electron beam) and with existing technologies (3 PW laser colliding with a 30 GeV electron beam).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Signature of Collective Plasma Effects in Beam-Driven QED Cascades

QED cascades play an important role in extreme astrophysical environments like magnetars. Furthermore, they can also be produced by passing a relativistic electron beam through an intense laser field. Signatures of collective pair plasma effects in these QED cascades are shown to appear, in exquisite detail, through plasma-induced frequency upshifts in the laser spectrum. Remarkably, these signatures can be detected even in small plasma volumes moving at relativistic speeds. Strong-field quantum and collective pair plasma effects can thus be explored with existing technology, provided that ultradense electron beams are colocated with multipetawatt lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser frequency upconversion in plasmas with finite ionization rates

Laser frequency can be upconverted in a plasma undergoing ionization. For finite ionization rates, the laser pulse energy is partitioned into a pair of counterpropagating waves and static transverse currents. The wave amplitudes are determined by the ionization rates and the input pulse duration. The strongest output waves can be obtained when the plasma is fully ionized in a time that is shorter than the pulse duration. The static transverse current can induce a static magnetic field with instant ionization, but it dissipates as heat if the ionization time is longer than a few laser periods. As a result, this picture comports with experimental data, providing a description of both laser frequency upconverters and other laser-plasma interaction with evolving plasma densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Creating localized plasma waves by ionization of doped semiconductors

Localized plasma waves can be generated by suddenly ionizing extrinsic semiconductors with spatially periodic dopant densities. The built-in electrostatic potentials at the metallurgical junctions, combined with electron density ripples, offer the exact initial condition for exciting long-lasting plasma waves upon ionization. This method can create plasma waves with a frequency between a few terahertz to subpetahertz without substantial damping. Here, the lingering plasma waves can seed backward Raman amplification in a wide range of resonance frequencies up to the extreme ultraviolet regime. Chirped wave vectors and curved wave fronts allow focusing the amplified beam in both longitudinal and transverse dimensions. The main limitation to this method appears to be obtaining sufficiently low plasma density from solid-state materials to avoid collisional damping.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of electromagnetic wave frequency upconversion in dynamic media

Frequency upconversion of an electromagnetic wave can occur in ionized plasma with decreasing electric permittivity and in split-ring resonator-structure metamaterials with decreasing magnetic permeability. We develop a general theory to describe the evolution of the wave frequency, amplitude, and energy density in homogeneous media with a temporally decreasing refractive index. We find that upconversion of the wave frequency is necessarily accompanied by partitioning of the wave energy into low-frequency modes, which sets an upper limit on the energy conversion efficiency. In conclusion, the efficiency limits are obtained for both varying permittivity and varying permeability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cascaded chirped photon acceleration for efficient frequency conversion

A cascaded sequence of photon acceleration stages using the instantaneous creation of a plasma density gradient by flash ionization allows the generation of coherent and chirped ultraviolet and x-ray pulses with independently tunable frequency and bandwidth. The efficiency of the cascaded process scales with 1/ω in energy, and multiple stages produce significant frequency up-conversion with gas-density plasmas. Lastly, chirping permits subsequent pulse compression to few-cycle durations, and output frequencies are not limited to integer harmonics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma q -plate for generation and manipulation of intense optical vortices

An optical vortex is a light wave with a twisting wavefront around its propagation axis and null intensity in the beam center. Its unique spatial structure of field lends itself to a broad range of applications, including optical communication, quantum information, superresolution microscopy, and multidimensional manipulation of particles. However, accessible intensity of optical vortices have been limited to material ionization threshold. This limitation might be removed by using the plasma medium. Here in this paper, we propose the design of suitably magnetized plasmas which, functioning as a q-plate, leads to a direct conversion from a high-intensity Gaussian beam into a twisted beam. A circularly polarized laser beam in the plasma accumulates an azimuthal-angle-dependent phase shift and hence forms a twisting wavefront. Our three-dimensional particle-in-cell simulations demonstrate extremely high-power conversion efficiency. The plasma q-plate can work in a large range of frequencies spanning from terahertz to the optical domain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Beam cleaning of an incoherent laser via plasma Raman amplification

We show that backward Raman amplification in plasma can efficiently compress a temporally incoherent pump laser into an intense coherent amplified seed pulse, provided that the correlation time of the pump is longer than the inverse plasma frequency. One analytical theory for Raman amplification using pump beams with different correlation functions is developed and compared to numerical calculations and particle-in-cell simulations. Since incoherence on scales shorter than the instability growth time suppresses spontaneous noise amplification, we point out a broad regime where quasi-coherent sources may be used as efficient low-noise Raman amplification pumps. As the amplified seed is coherent, Raman amplification provides an additional a beam-cleaning mechanism for removing incoherence. At near-infrared wavelengths, finite coherence times as short as 50 fs allow amplification with only minor losses in efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser pulse sharpening with electromagnetically induced transparency in plasma

We propose a laser-controlled plasma shutter technique to generate sharp laser pulses using a process analogous to electromagnetically induced transparency in atoms. The shutter is controlled by a laser with moderately strong intensity, which induces a transparency window below the cutoff frequency, and hence enables propagation of a low frequency laser pulse. Numerical simulations demonstrate that it is possible to generate a sharp pulse wavefront (sub-ps) using two broad pulses in high density plasma. The technique can work in a regime that is not accessible by plasma mirrors when the pulse pedestals are stronger than the ionization intensity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗