Search NASA⌕ Search

Engineering topics

Quang-Viet Nguyen

Publications and source records attributed to Quang-Viet Nguyen.

NOAA-17 Break-up Engineering Investigation Board Final Report

The NOAA-17 break-up was found to be a single, localized debris event producing about100 trackable pieces; there is likely no catastrophic damage to the whole spacecraft. NOAA-17 debris is very much in family with NOAA-16 debris, and DMSP F11 and F13 are very much in family with each other and share similarities with NOAA-16 and 17; it is likely all four (“The Big Four”) share the same debris source. DMSP F13 break-up occurred simultaneous with a known battery overcharge and therefore battery rupture is most likely intermediate cause of the Big Four break-ups; this is a low confidence assessment since other debris sources cannot be definitively ruled out. No root cause was found as the NOAA-17 batteries were all confirmed to have been disconnected from the charge path as intended. Possible conditions for reconnection are all unlikely including short circuits and commanding from a “bad actor.” All related spacecraft pose a risk of similar break-ups for decades to come and are a threat to the critical 800-850 km polar orbit regime; even appropriately decommissioned spacecraft appear to be at risk. Recommendations include an update to the decommissioning procedure and consideration of further investigations and active debris removal, consistent with national policy.

Maggie Atkinson↗

High-speed electromechanical chutter for imaging spectrographs

The present invention presents a high-speed electromechanical shutter which has at least two rotary beam choppers that are synchronized using a phase-locked loop electronic control to reduce the duty cycle. These choppers have blade means that can comprise discs or drums, each having about 60 (+/- 15) slots which are from about 0.3 to about 0.8 mm wide and about 5 to about 20 nun long (radially) which are evenly distributed through out 360 deg, and a third rotary chopper which is optically aligned has a small number of slots, such as for example, 1 to 10 slots which are about 1 to about 2 mm wide and about 5 to about 20 mm long (radially). Further the blade means include phase slots that allow the blade means to be phase locked using a closed loop control circuit. In addition, in a preferred embodiment, the system also has a leaf shutter. Thus the invention preferably achieves a gate width of less than about 100 microseconds, using motors that operate at 3000 to 10,OOO rpm, and with a phase jitter of less than about 1.5 microseconds, and further using an aperture with more than about 75% optical transmission with a clear aperture of about 0.8 -10 nun. The system can be synchronized to external sources at 0 6 kHz lasers, data acquisition systems, and cameras.

Quang-Viet Nguyen↗