Search NASA⌕ Search

Engineering topics

Quintero, Michael A.

Publications and source records attributed to Quintero, Michael A..

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Metal Sulfide Ion Exchangers: High Acid Stability of Na 2 x Mg 2 y – x Sn 4– y S 8 (NMS) and Topotactic Conversion to 2D Solid Acids with Semiconducting Character

Metal sulfide ion exchange materials (MSIEs) are of interest for nuclear waste remediation applications. Here, we report the high stability of two structurally related metal sulfide ion exchange materials, Na 2x Mg 2y–x Sn 4–y S 8 (Mg-NMS) and Na 2 SnS 3 (Na-NMS), in strongly acid media, in addition to the preparation of Na 2x Ni 2y–x Sn 4–y S 8 (Ni-NMS). Their formation progress during synthesis is studied with in-situ methods, with the target phases appearing in <15 min, reaction completion in <12 h, and high yields (75–80%). Upon contact with nitric or hydrochloric acid, these materials topotactically exchange Na + for H + , proceeding in a stepwise protonation pathway for Na 5.33 Sn 2.67 S 8 . Na-NMS is stable in 2 M HNO 3 and Mg-NMS is stable in 4 M HNO 3 for up to 4 h, while both NMS materials are stable in 6 M HCl for up to 4 days. However, the treatment of Mg-NMS and Na-NMS with 2–6 M H 2 SO 4 reveals a much slower protonation process since after 4 h of contact both NMS and HMS are present in the solution. The resultant protonated materials, H 2x Mg 2y–x Sn 4–y S 8 and H 4x [(H y Na y–1 ) 1.33x Sn 4––1.33x ]S 8 , are themselves solid acids and readily react with and intercalate a variety of organic amines, where the band gap of the resultant adduct is influenced by amine choice and can be tuned within the range of 1.88(5)–2.27(5) eV. The work function energy values for all materials were extracted from photoemission yield spectroscopy in air (PYSA) measurements and range from 5.47 (2) to 5.76 (2) eV, and the relative band alignments of the materials are discussed. DFT calculations suggest that the electronic structure of Na 2 MgSn 3 S 8 and H 2 MgSn 3 S 8 makes them indirect gap semiconductors with multi-valley band edges, with carriers confined to the [MgSn 3 S 8 ] 2– layers. Light electron effective masses indicate high electron mobilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transient X-ray Diffraction Reveals Nonequilibrium Phase Transition in Thin Films of CH 3 NH 3 PbI 3 Perovskite

Advantageous optoelectronic properties of methylammonium lead triiodide likely arise from coupling between photogenerated charge-carriers and the soft, deformable lattice. We investigate structural dynamics of MAPbI 3 films using time-resolved X-ray diffraction versus pump-probe time delay and pump intensity. During the first nanosecond, the lattice anisotropically distorts from tetragonal to cubic at excitation intensities that are insufficient to thermally induce the first-order thermodynamic phase transition at 330K. Further, the high-symmetry structure then relaxes back to the starting phase with 11 and 236-ns time constants via a different transition pathway than observed either in the first nanosecond or in previous reports for MAPbI 3 . Early-time dynamics are consistent with polaron formation and lattice strain stabilization while the slower recovery dynamics outlive radiative recombination and relates metastability. Fluence-independence of these lattice deformations in the low-power regime conveys relevance to optoelectronics including photovoltaics and highlights sustained involvement of non-equilibrium, photoinduced lattice reorganization in MAPbI 3 under functional conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nonequilibrium Lattice Dynamics in Photoexcited 2D Perovskites

Abstract Interplay between structural and photophysical properties of metal halide perovskites is critical to their utility in optoelectronics, but there is limited understanding of lattice response upon photoexcitation. Here, 2D perovskites butylammonium lead iodide, (BA) 2 PbI 4 , and phenethylammonium lead iodide, (PEA) 2 PbI 4 , are investigated using ultrafast transient X‐ray diffraction as a function of optical excitation fluence to discern structural dynamics. Both powder X‐ray diffraction and time‐resolved photoluminescence linewidths narrow over 1 ns following optical excitation for the fluence range studied, concurrent with slight redshifting of the optical bandgaps. These observations are attributed to transient relaxation and ordering of distorted lead iodide octahedra stimulated mainly by electron–hole pair creation. The c axis expands up to 0.37% over hundreds of picoseconds; reflections sampling the a and b axes undergo one tenth of this expansion with the same timescale. Post‐photoexcitation appearance of the (110) reflection in (BA) 2 PbI 4 would suggest a transient phase transition, however, through new single‐crystal XRD, reflections are found that violate glide plane conditions in the reported Pbca structure. The static structure space group is reassigned as P 2 1 2 1 2 1 . With this, a nonequilibrium phase transition is ruled out. These findings offer increased understanding of remarkable lattice response in 2D perovskites upon excitation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

ACuZrQ 3 (A = Rb, Cs; Q = S, Se, Te): Direct Bandgap Semiconductors and Metals with Ultralow Thermal Conductivity

ACuZrQ 3 (A = Rb, Cs; Q = S, Se, Te) were synthesized as black platelet crystals. RbCuZrS 3 , RbCuZrSe 3 , and CsCuZrS 3 crystallize in the KCuZrSe 3 structure type with space group Cmcm, and RbCuZrTe 3 and CsCuZrTe 3 crystallize in the lower symmetry space group Pnma. The tellurides exhibit a second order Jahn-Teller distortion with off-centering of Zr in its octahedral environment. The magnitude of the distortion is larger in RbCuZrTe 3 than in CsCuZrTe 3 . The structures of beta-CsCuS 4 and Rb 2 Cu 5 Te 5 were also determined. CsCuZrS 3 melts at 910 C-circle and exhibits partial decomposition upon heating at 275 C-circle, while CsCuZrTe 3 melts incongruently. Our DFT calculations of RbCuZrQ 3 (Q = S, Se) and CsCuZrS 3 indicate direct gap semiconductors in agreement with experiments. ACuZrTe 3 (A = Rb, Cs) were calculated to be metals which was confirmed for RbCuZrTe 3 with variable temperature conductivity measurements and consistent with heat capacity measurements. Spectroscopic measurements found a bandgap and work function of 1.44(5) eV and 4.89(5) eV for RbCuZrS 3 and 0.95(5) eV and 4.67(5) eV for RbCuZrSe 3 , respectively. Finally, RbCuZrTe 3 did not exhibit an optical bandgap and has a work function of 4.64(5) eV. RbCuZrTe 3 exhibits a low thermal conductivity under 0.5 W m -1 K -1 at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Homologous Alkali Metal Copper Rare-Earth Chalcogenides A 2 Cu 2 n Ln 4 Q 7+ n ( n = 1, 2, 3)

Twenty-seven new members of the A 2 Cu 2n Ln 4 Q 7+n (A = Cs, Rb; Ln = La-Nd, Sm, Gd-Yb; Q = S, Se) homologous series were synthesized in one of three structural types (indicated by n = 1, 2, 3). All the compounds contained 3D frameworks with alkali-metal-containing tunnels. For each increment in n, one Cu 2 Q was added, which was incorporated into the framework as an edge-sharing tetrahedron by replacing a square planar chalcogenide site. High-throughput DFT calculations predicted many of the phases to be thermodynamically stable. These predictions were compared with the synthesis results for the phases formed in each composition space. In the syntheses, heavier lanthanides showed a preference to start forming the n = 3 ACu 3 Ln 2 Q 5 , which is consistent with the predictions. RbCuNd 2 Se 4 and RbCuTb 2 Se 4 were found to be thermally stable under vacuum at temperatures up to 1000 °C. Optical measurements revealed band gaps of 1.55(5) and 1.62(5) eV for CsCuCe 2 Se 4 and RbCuTb 2 Se 4 , respectively, and a work function of 4.83(5) eV for CsCuPr 2 Se 4 . Additionally, some n = 3 ACu 3 Ln 2 Qs compounds exhibit a negative phonon mode because of a copper atom coordination, which may distort to a trigonal planar geometry at sufficiently low temperatures. The dynamic instabilities and the predicted distortion in the copper tetrahedra for the n = 3 ACu 3 Ln 2 Q 5 compounds were found to have a linear relationship with the atomic number of the lanthanides and the electronegativity of the lanthanides. In conclusion, the A 2 Cu 2 n Ln 4 Q 7+n compounds can potentially find application as high-temperature thermoelectric materials and other semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lithium thiostannate spinels: air-stable cubic semiconductors.

Lithium chalcogenide materials have been studied less than other alkali metal analogs and are of interest as ion conductors and semiconductors capable of thermal neutron detection. Herein, we describe the structural, thermal, magnetic, electronic, and ionic properties of a new family of cubic lithium thiospinels Li2MSn3S8 (M = Mg, Fe, Mn, Ni, Co) and Li1.66CuSn3.33S8. All compounds crystallize in the Fd (3) over barm space group and exhibit site occupancy disorder with Sn and M on the octahedral site for M = Mg, Fe, Mn, Ni, Co. The Li1.66CuSn3.33S8 compound also exhibits occupancy disorder on the tetrahedral sites between Li and Cu, as well as on the octahedral sites between Li and Sn. We demonstrate the ability to tune the physical properties of the compounds by changing their composition. By tuning the identity of the transition metal in the structure, the optical band gaps can vary between 0.91(2) and 2.19(2) eV, and electrical resistivities between 2.8 x 10(3) Omega-cm and 2.2 x 10(7)Omega-cm can be achieved. Density functional theory calculations for Li2MgSn3S8 and Li1.66CuSn3.33S8 suggest that both materials have indirect band gaps and significantly dispersive conduction bands. A bandwidth dispersion of 0.75 and 0.70 eV along the Gamma -> M direction in the conduction band are predicted for Li2MgSn3S8 and Li1.66CuSn3.33S8, respectively, with an electron effective mass of 0.49 and 0.55 m(e) at the Gamma point. The hole effective mass in the valence band is calculated to be 1.25 me at the M point and 0.75 me at the L point for Li2MgSn3S8 and Li1.66CuSn3.33S8, respectively. The ionic/electronic conductivity of each compound was determined using AC electrochemical impedance spectroscopy.

Quintero, Michael A.↗