Search NASA⌕ Search

Engineering topics

R C Ewing

Publications and source records attributed to R C Ewing.

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Trends in Barrier Island Geomorphology Under Continuous Sea Level Rise: Padre Island from 1940-2020

Barrier islands serve an important role in shielding coastal areas from storm surges and wave erosion. Monitoring changes in a barrier island system helps determine the combined effect of sediment supply, aeolian sand transport, storms and sea level rise (SLR) on long-term island survival. Here we present and discuss changes to the southern end of Padre Island (TX),including a back-barrier active dune field, across 7 decades from 1941 - 2020. We have used aerial photos, satellite imagery, and field monitoring to map the decadal and seasonal geomorphological changes. We produced facies maps for each decade from 1970 to present, complemented with qualitative observations for 1941-1970, when aerial imagery was incomplete. We also used supervised classification to monitor monthly changes in the availability of sand for aeolian transport over a full seasonal cycle, to determine the role of the fluctuating water table on the sand budget of the active dune field. Results indicate that the southern end of Padre Island experienced significant change over the study period, transitioning from unvegetated dune fields and sand flats to expansive vegetated dunes, a tidal flat with microbial mats and a shrinking active dune field. Vegetated dunes, absent in 1970, now cover 14% of the study area. The active dune field shrunk from 12%coverage to 6%, with sand available for transport varying from 3% to 21% as the water table fluctuates throughout the year. The infrequently flooded back-island sand flat covering 40% of the study area has transitioned to a lower-lying tidal flat. Furthermore, extensive microbial mats and crusts have developed within the wind-tidal flat, in washover fans, and in low-lying interdune areas. All these early signs are consistent with a progressive drowning of the barrier island, an event we hypothesize was triggered by the sudden spread of vegetation along the back-beach dunes. Plant colonization then cut off sand supply from the beach to the back-barrier, and thus access to the primary source of sand to the system. Our findings highlight the contradictory role of vegetation in barrier islands, as they stabilize dunes and promote sand accretion at the back-beach, while also isolating the back-barrier from aeolian sediment sources, thus amplifying the effects of sea level rise in the absence of salt marshes and/or mangrove platforms.

K R Fisher↗
NASA NTRSDate not supplied

Characterizing Martian X-Ray Amorphous Materials Through Terrestrial Analogs

X-ray amorphous materials (i.e., lacking long-range crystallographic order) have been identified on the martian surface from orbit and in-situ. Initial models of orbital IR spectral data identified volcanic glasses [e.g., 1], but subsequent interpretations suggested that amorphous silicates are dominantly secondary in nature and formed from water-rock interactions [e.g., 2-4]. Thermal IR spectra from the Mini-Thermal Emission Spectrometer on the Spirit rover show evidence for the amorphous secondary product opaline silica [e.g., 5]. X-ray diffraction (XRD) measurements by the CheMin instrument on the Mars Science Laboratory rover have identified 20-70 wt.% amorphous materials in every sample analyzed in Gale crater to date [e.g., 6]. Mass balance calculations using CheMin results and bulk elemental measurements by the Alpha Particle X-ray Spectrometer suggest the amorphous component in Gale crater is variably enriched in Si, Fe, and S [e.g., 7,8]. The compositions are not consistent with pure volcanic glass, indicating water must have been involved in the formation of amorphous materials in Gale crater. We seek to better constrain the conditions under which amorphous materials on Mars formed by studying the composition and short-range atomic order of amorphous materials in terrestrial analog environments via XRD and transmission electron microscopy (TEM).

E B Rampe↗
NASA NTRSDate not supplied

Erodibility of Microbial mats and the Implications for Preservation of Microbially Induced Sedimentary Structures (MISS)

Microbial induced sedimentary structures (MISS) are frequently discussed as potential astrobiological markers on Mars and other planetary bodies[1,2,3]. The presence of fossilized microbial mat structures from the Archaean demonstrates the ability of microbial mats to remain preserved for billions of years[3,4,5].To be preserved microbial mats must survive erosion to be buried in their depositional environment[5]. Erosion of mats is typically due to water, but mats also exist in aeolian environments where wind is a dominant a gent of erosion. The susceptibility of microbial mats to erosion due to aeolian a nd subaqueous sediment transport has important implications for understanding the distribution a nd preservation of potential biological materials on the surface of Mars, Titan, a nd the early Earth. Here we measure the erodibility of microbial m a t s by water a nd wind using field experiments on hyper-saline tidal flats at Padre Island, Texas. The sandy sedimentary environment of Padre Island is a promising astrobiological analogue for Mars and Titan.

K R Fisher↗
NASA NTRSDate not supplied

Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (Metric)

Geological solids are characterized by their mineral structure, elemental composition, and morphology. The Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (METRIC) is an instrument payload that will quantify all three. METRIC comprises a suite of instruments in a lander to perform X-ray diffraction (XRD) for mineral structure, X-ray fluorescence (XRF) for elemental composition, and X-ray Micro Computed Tomography (XCT) for 3D internal micromorphology. The instruments are accompanied by an Infrared Spectrometer (IRS) provide geologic context. A Honeybee Robotics pneumatic sampling and transfer system [e.g., 1] will be positioned under the lander to deliver sieved regolith to the X-ray instruments for analysis. This payload is envisioned for deployment to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander but could be carried on a lander or rover to any solid surface in the solar system.

E B Rampe↗
NASA NTRSDate not supplied

Investigating Physical and Chemical Weathering of Fluvial and Aeolian Sediments in Mars-Analog Environments Using Close-Up Image Analysis

Results from the NASA Curiosity rover show that the ancient (>3 Ga) sedimentary rocks in Gale crater formed by fluvial and lacustrine processes, with aeolian processes dominating the geological record after the river-lake system ended in the Hesperian. The sedimentary system in Gale crater contains a mineralogy dominated by basaltic materials, not the quartzofeldspathic minerals that derive most sedimentary rocks on the Earth. There remains a knowledge gap for understanding how basaltic materials are physically and chemically weathered in fluvial and aeolian environments. This research aims to under-stand how the physical and chemical characteristics of basaltic sediments change as they are transported from source-to-sink in Mars-analog environments utilizing close-up images and X-Ray Diffraction (XRD) analysis. These data were collected as part of the SAND-E mission.

F D Garcia Ledezma↗