Search NASA⌕ Search

Engineering topics

Radel, Ross F

Publications and source records attributed to Radel, Ross F.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

Modeling and experimental results for condensing supercritical CO2 power cycles.

This Sandia supported research project evaluated the potential improvement that 'condensing' supercritical carbon dioxide (S-CO{sub 2}) power cycles can have on the efficiency of Light Water Reactors (LWR). The analytical portion of research project identified that a S-CO{sub 2} 'condensing' re-compression power cycle with multiple stages of reheat can increase LWR power conversion efficiency from 33-34% to 37-39%. The experimental portion of the project used Sandia's S-CO{sub 2} research loop to show that the as designed radial compressor could 'pump' liquid CO{sub 2} and that the gas-cooler's could 'condense' CO{sub 2} even though both of these S-CO{sub 2} components were designed to operate on vapor phase S-CO{sub 2} near the critical point. There is potentially very high value to this research as it opens the possibility of increasing LWR power cycle efficiency, above the 33-34% range, while lowering the capital cost of the power plant because of the small size of the S-CO{sub 2} power system. In addition it provides a way to incrementally build advanced LWRs that are optimally designed to couple to S-CO{sub 2} power conversion systems to increase the power cycle efficiency to near 40%.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2010

Methods for modeling impact-induced reactivity changes in small reactors.

This paper describes techniques for determining impact deformation and the subsequent reactivity change for a space reactor impacting the ground following a potential launch accident or for large fuel bundles in a shipping container following an accident. This technique could be used to determine the margin of subcriticality for such potential accidents. Specifically, the approach couples a finite element continuum mechanics model (Pronto3D or Presto) with a neutronics code (MCNP). DAGMC, developed at the University of Wisconsin-Madison, is used to enable MCNP geometric queries to be performed using Pronto3D output. This paper summarizes what has been done historically for reactor launch analysis, describes the impact criticality analysis methodology, and presents preliminary results using representative reactor designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2010

Operation and analysis of a supercritical CO2 Brayton cycle.

Sandia National Laboratories is investigating advanced Brayton cycles using supercritical working fluids for use with solar, nuclear or fossil heat sources. The focus of this work has been on the supercritical CO{sub 2} cycle (S-CO2) which has the potential for high efficiency in the temperature range of interest for these heat sources, and is also very compact, with the potential for lower capital costs. The first step in the development of these advanced cycles was the construction of a small scale Brayton cycle loop, funded by the Laboratory Directed Research & Development program, to study the key issue of compression near the critical point of CO{sub 2}. This document outlines the design of the small scale loop, describes the major components, presents models of system performance, including losses, leakage, windage, compressor performance, and flow map predictions, and finally describes the experimental results that have been generated.

42 ENGINEERING↗