Engineering topics
Radulescu, Costin
Publications and source records attributed to Radulescu, Costin.
The Advanced Multi-Mission Operations System (AMMOS): An Introduction to the Multi-Mission Tools and Services Used by 70+ NASA Missions
No abstract provided
Systems and Methods for Advanced Rapid Imaging and Analysis for Earthquakes
Many embodiments provide a hybrid data processing system (HySDS) of an end-to-end geodetic imaging data system enabling near-real-time science, assessment, response, and rapid recovery. The HySDS may be an operation data processing system that integrates data from many different geodetic data sources and/or sensors, including interferometric synthetic aperture radar (InSAR), GPS, pixel tracking, seismology, and/or modeling, and processes the data to generate actionable high quality science data products. The HySDS may provide for an automated imaging and analysis capabilities that is able to handle the imminent increases in raw data from new and existing geodetic monitoring sensor systems.
A Standard Reference Model for Data Archives
An implementable Data Archive Architecture is being developed for trusted digital repositories based on the Reference Model for an Open Archival Information System (OAIS) – ISO 14721. A set of interoperable protocols and interface specifications are planned that will offer capabilities for accessing, merging, and re-using data, both within and across the operational boundaries of trustworthy digital repositories. The model will also provide support for the fundamental scientific need to verify the reproducibility of results. This standards development task is being performed by the Data Archive Interoperability (DAI) working group within the Consultative Committee for Space Data Systems (CCSDS). The architecture integrates concepts from the OAIS Reference Model, the ISO/IEC 11179 Metadata Registry (MDR) standard, the CCSDS Reference Architecture for Space Information Management (RASIM), the proposed draft recommended practice document, Information Preparation to Enable Long Term Use (IPELTU), and three decades of digital repository development for science research.
PDS Label Assistant for Interactive Design (PLAID): simplifying PDS4 label template building
UNKNOWN
Hybrid-cloud Science Data System Enabling Advanced Rapid Imaging and Analysis for Monitoring Hazards
No abstract available
In-Situ Focusing Inside a Thermal Vacuum Chamber
Traditionally, infrared (IR) space instruments have been focused by iterating with a number of different thickness shim rings in a thermal vacuum chamber until the focus meets requirements. This has required a number of thermal cycles that are very expensive as they tie up many integration and test (I&T)/ environmental technicians/engi neers work ing three shifts for weeks. Rather than creating a test shim for each iteration, this innovation replaces the test shim and can focus the instrument while in the thermal vacuum chamber. The focus tool consists of three small, piezo-actuated motors that drive two sets of mechanical interface flanges between the instrument optics and the focal- plane assembly, and three optical-displacement metrology sensors that can be read from outside the thermal vacuum chamber. The motors are used to drive the focal planes to different focal distances and acquire images, from which it is possible to determine the best focus. At the best focus position, the three optical displacement metrology sensors are used to determine the shim thickness needed. After the instrument leaves the thermal vacuum chamber, the focus tool is replaced with the precision-ground shim ring. The focus tool consists of two sets of collars, one that mounts to the backside of the interface flange of the instrument optics, and one that mounts to the backside of the interface flange of the focal plane modules. The collars on the instrument optics side have the three small piezo-actuated motors and the three optical displacement metrology systems. Before the instrument is focused, there is no shim ring in place and, therefore, no fasteners holding the focal plane modules to the cameras. Two focus tooling collars are held together by three strong springs. The Orbiting Carbon Observatory (OCO) mission spectrometer was focused this way (see figure). The motor described here had to be moved five times to reach an acceptable focus, all during the same thermal cycle, which was verified using pupil slicing techniques. A focus accuracy of .20.100 microns was achieved.