Search NASA⌕ Search

Engineering topics

Ragusa, Jean C.

Publications and source records attributed to Ragusa, Jean C..

At least 19 records

Parametric dynamic mode decomposition for reduced order modeling

Dynamic Mode Decomposition (DMD) is a model-order reduction approach, whereby spatial modes of fixed temporal frequencies are extracted from numerical or experimental data sets. The DMD low-rank or reduced operator is typically obtained by singular value decomposition of the temporal data sets. For parameter-dependent models, as found in many multi-query applications such as uncertainty quantification or design optimization, the only parametric DMD technique developed was a stacked approach, with data sets at multiple parameter values were aggregated together, increasing the computational work needed to devise low-rank dynamical reduced-order models. Here in this paper, we present two novel approach to carry out parametric DMD: one based on the interpolation of the reduced-order DMD eigen-pair and the other based on the interpolation of the reduced DMD (Koopman) operator. Numerical results are presented for diffusion-dominated nonlinear dynamical problems, including a multiphysics radiative transfer example. All three parametric DMD approaches are compared.

97 MATHEMATICS AND COMPUTING↗

Parametric model-order reduction for radiation transport using multi-resolution proper orthogonal decomposition

For parametric high-fidelity simulations, it is often desirable to utilize a reduced-order model (ROM) to emulate, at a reduced computational cost, parametric solutions of the governing partial differential equations (PDEs) for unseen parameter values. One commonly employed option is to utilize a data-driven, projection-based ROM supplemented with subspace identification via proper orthogonal decomposition (POD). POD discovers the ROM subspace by computing the singular value decomposition (SVD) of a set of training data from the full-order model (FOM). In streaming-dominated radiation transport simulations with localized sources, solutions often greatly vary over the spatial domain by many orders of magnitude. In such cases, machine-precision arithmetic can be insufficient to obtain an accurate SVD, resulting in a poorly performing ROM. We present a method called multiresolution POD (mrPOD) that mitigates these inaccuracies. The mrPOD method works by decomposing the spatial domain into regions and performing proper orthogonal decomposition on the training dataset separately in each region. In conclusion, mrPOD is tested on single energy group and multigroup atmospheric shielding transport problems and is shown to outperform classic POD.

42 ENGINEERING↗

Development of a Single-Phase, Transient, Subchannel Code, within the MOOSE Multi-Physics Computational Framework

Subchannel codes have been widely used for thermal-hydraulics analyses in nuclear reactors. This paper details the development of a novel subchannel code within the Idaho National Laboratory’s (INL) Multi-physics Object Oriented Simulation Environment (MOOSE). MOOSE is a parallel computational framework targeted at the solution of systems of coupled, nonlinear partial differential equations, that often arise in the simulation of nuclear processes. As such, it includes codes/modules able to solve the multiple linear and nonlinear physics that describe a nuclear reactor, under normal operation conditions or accidents. This includes thermal-hydraulics, fuel performance, and neutronics codes, between others. A MOOSE-based subchannel code is a new addition to the fleet of INL-developed codes, based on the MOOSE framework. In this work, we present the derivation of the subchannel equations for a single-phase fluid, we proceed with the description of the algorithm that is used to solve these equations and describe how this algorithm was implemented within MOOSE. We also present how this code can be coupled to the BISON fuel performance code. Next, we verify the friction model and the turbulent mixing model. We calibrate the turbulent modeling parameters for momentum mixing and enthalpy mixing, C T , β. We validate the code using experimental results and last demonstrate the coupling capabilities using a simple example.

42 ENGINEERING↗

GeN-ROM—An OpenFOAM®-based multiphysics reduced-order modeling framework for the analysis of Molten Salt Reactors

This work presents a projection-based multiphysics Model Order Reduction (MOR) framework for the analysis of nuclear systems and its application to parametric simulations of Molten Salt Reactors (MSR). The framework, named GeN-ROM, is developed using OpenFOAM® and employs a Proper Orthogonal Decomposition aided Reduced-Basis technique (POD-RB). It can be used to reduce steady-state and transient multiphysics problems involving parametric fluid dynamics, heat exchange, and neutronics phenomena. For the treatment of structural elements in the hydraulic systems, a porous medium approach has been adopted. The reduction process is data-driven and snapshot information is extracted via POD to learn the solution manifold and to build global spatial basis functions. At the data collection phase, GeN-ROM makes use of the solvers available in GeN-Foam, a similarly OpenFOAM®-based multiphysics framework developed for the analysis of nuclear reactors. The global bases are used both to approximate the solution fields and to project the full-order equations onto lower-dimensional subspaces, thus considerably reducing the number of unknowns in a numerical system. This reduction leads to significant computational speedups, which is ideal for multi-query applications such as uncertainty quantification or design optimization. The developed tool has been tested using a 2D multiphysics model of the Molten Salt Fast Reactor (MSFR) with steady-state and transient scenarios, with speedups on the order of 10 – 10 5 .

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Massively parallel transport sweeps on meshes with cyclic dependencies

When solving the first-order form of the linear Boltzmann equation, a common misconception is that the matrix-free computational method of “sweeping the mesh”, used in conjunction with the Discrete Ordinates method, is too complex or does not scale well enough to be implemented in modern high performance computing codes. This has led to considerable efforts in the development of matrix-based methods that are computationally expensive and is partly driven by the requirements placed on modern spatial discretizations. In particular, modern transport codes are required to support higher order elements, a concept that invariably adds a lot of complexity to sweeps because of the introduction of cyclic dependencies with curved mesh cells. In this article we will present a comprehensive implementation of sweeping, to a piecewise-linear DFEM spatial discretization with particular focus on handling cyclic dependencies and possible extensions to higher order spatial discretizations. We find that these methods are implemented in a new C++ simulation framework called Chi-Tech (). We present some typical simulation results with some performance aspects that one can expect during real world simulations, we also present a scaling study to >100k processes where Chi-Tech maintains greater than 80% efficiency solving a total of 87.7 trillion angular flux unknowns for a 116 group simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Space-energy separated representations for multigroup neutron diffusion using proper generalized decompositions

Proper generalized decomposition (PGD) can be described as a numerical extension of separation of variables and thus be employed as a solution technique for multi-dimensional problems, where dimensions should be understood in the phase-space context of the governing law at hand. This paper presents a PGD approach on efficiently solving problems involving multigroup neutron diffusion. Two PGD approaches are described: space-only and space-energy decompositions. Numerical results include 2-D and 3-D examples with two-, seven-, and 145-group structures. The PGD solutions are compared against traditional multi-dimensional finite element discretization. For few-group problems, both PGD approaches prove effective for mildly heterogeneous geometries, but showed reduced performance with increasing heterogeneity. The space-energy representation was found to be slower than the space-only approach for two-group problems, but proved more effective for seven-group problems. For even larger numbers of groups, the space-energy PGD decomposition was very effective at reducing the computational time.

42 ENGINEERING↗

Uncollided flux techniques for arbitrary finite element meshes

The uncollided angular flux can be difficult to compute accurately in discrete-ordinate radiation transport codes, especially in weakly-scattering configurations with localized sources. It has long been recognized that an analytical or semi-analytical treatment of the uncollided flux, coupled with a discrete-ordinate solution for the collided flux, can yield dramatic improvements in solution accuracy and computational efficiency. In this paper, we present such an algorithm for the semi-analytical calculation of the uncollided flux. This algorithm is unique in several aspects: (1) it applies to arbitrary polyhedral cells (and can be thus coupled with collided flux solvers that support arbitrary polyhedral meshes without the need for explicit tetrahedral re-meshing), (2) it provides accurate uncollided solutions near sources, (3) it is devised with parallel implementation in mind, and (4) it minimizes the total number of traced rays and maintains a reasonable ray density on each local subdomain. This paper provides a complete derivation of the algorithm and demonstrates its important features on a set of simple examples and a standard transport benchmark. Assessment of its parallel performance will be the subject of a subsequent paper.

42 ENGINEERING↗

Reduced-order modeling of parameterized multi-group diffusion k-eigenvalue problems

In this paper, a group-wise Reduced-Order Model, based on a Proper Orthogonal Decomposition (POD) technique, is presented for parameterized multi-group diffusion k-eigenvalue problems. The group-wise approach is shown to be more robust than model-order reduction based on monolithic multi-group POD modes. In addition, fewer POD modes are required. The method of snapshots is employed to generate the offline training set. Two Naïve and a Greedy snapshot-generation strategies are compared. The input parameter space is surveyed using Latin Hypercube Sampling techniques. The effectiveness of the group-wise model-order reduction method is demonstrated on two reactor-physics benchmarks, a two-group 3D Pressurized Water Reactor problem with 26 uncertain input parameters and a seven-group UO 2 -MOX fuel 3D mini-core with 287 uncertain input parameters. In both examples the Reduced-Order Models built using the snapshots generated by the Greedy algorithm proved to be slightly better. Model-order reduction yields results that are within 1 pcm of the full-order model, with speed-up factors of about 1000–3000, depending upon the test case.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simulations of single- and two-phase shock tubes and gravity-driven wave problems with the RELAP-7 nuclear reactor system analysis code

Propagation of pressure waves in single and two-phase flows is of key interest for nuclear safety analyses, reactor design, construction and life extension of nuclear reactors. In this work, we assess the capabilities of RELAP-7, the next-generation nuclear reactor system code, to solve single- and two-phase flows developing pressure waves. RELAP-7 is based on a 7-equation, two-phase flow model, with distinct phasic pressures. It is well established that these hyperbolic conservation laws can develop shocks and discontinuities and thus, require a stabilization numerical method. The all-Mach flow Entropy Viscosity Method (EVM) is now employed in RELAP-7 as a viscous stabilization approach. In this paper, we briefly describe the implementation of the EVM and use open-literature test cases that exhibit pressure waves to show that the entropy viscosity method performs adequately for these single- and two-phase cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Viscous regularization of the full set of nonequilibrium-diffusion Grey Radiation-Hydrodynamic equations

A viscous regularization technique, based on the local entropy residual, was proposed by Delchini et al. (2015) to stabilize the nonequilibrium-diffusion Grey Radiation-Hydrodynamic equations using an artificial viscosity technique. This viscous regularization is modulated by the local entropy production and is consistent with the entropy minimum principle. However, Delchini et al. (2015) only based their work on the hyperbolic parts of the Grey Radiation-Hydrodynamic equations and thus omitted the relaxation and diffusion terms present in the material energy and radiation energy equations. Here in this paper, we extend the theoretical grounds for the method and derive an entropy minimum principle for the full set of nonequilibrium-diffusion Grey Radiation-Hydrodynamic equations. This further strengthens the applicability of the entropy viscosity method as a stabilization technique for radiation-hydrodynamic shock simulations. Radiative shock calculations using constant and temperature-dependent opacities are compared against semi-analytical reference solutions, and we present a procedure to perform spatial convergence studies of such simulations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗