Search NASA⌕ Search

Engineering topics

Rai, M. M.

Publications and source records attributed to Rai, M. M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

A numerical analysis of tonal acoustics in rotor-stator interactions

In this study, the unsteady, thin-layer, Navier-Stokes equations are solved using a system of patched grids for a rotor-stator configuration of an axial turbine. The study focuses on the plurality of spinning modes that are present in such an interaction. The propagation of these modes in the upstream and downstream regions is analyzed and compared with numerical results. It was found that the numerically calculated tonal acoustics could be affected by the type of numerical boundary conditions employed at the inlet and exit of the computational boundaries and the grid spacing in the upstream and downstream regions. Results in the form of surface pressure amplitudes and the spectra of turbine tones and their far field behavior are presented. Numerical results and experimental data are compared wherever possible. The 'mode-content' for different harmonics of blade-passage frequency is shown to conform with that predicted by a kinematical analysis.

Rangwalla, A. A.↗
NASA NTRS1991

Computation Of Flow In A Turbine Stage On A Refined Grid

Finer grid yields more accurate results. Report describes numerical simulation of flow in axial-turbine stage, showing interactions between rotor- and stator-airfoil rows. Complements earlier three-dimensional, time-accurate Navier-Stokes numerical simulation.

Madavan, N. K.↗
NASA NTRS1991

A multi-passage three-dimensional Navier-Stokes simulation of turbine rotor-stator interaction

This paper deals with the development and validation of a 3D multipassage Navier-Stokes code for predicting the unsteady effects due to rotor-stator interaction in turbomachines. Prior work in two dimensions has demonstrated the necessity of including multiple rotor and stator passages in order to closely approximate the stator-to-rotor airfoil count ratio and thus accurately predict the unsteady flowfield resulting from rotor-stator interaction. In the present paper, this multipassage capability is extended to three dimensions. Numerical results obtained from a multipassage (three stator and four rotor passage) calculation of an axial turbine stage are presented. The stator-to-rotor airfoil count ratio (3:4) used in the present calculations is a close approximation to that in the actual turbine configuration (22:28). The present multipassage calculation results in a more accurate prediction of the unsteady flowfield than that possible from a single-passage calculation.

Madavan, N. K.↗
NASA NTRS1991

Temporally and spatially resolved flow in a two-stage axial compressor. II - Computational assessment

Fluid dynamics of turbomachines are complicated due to aerodynamic interactions between rotors and stators. It is necessary to understand the aerodynamics associated with these interactions in order to design turbomachines that are both light and compact as well as reliable and efficient. The current study uses an unsteady, thin-layer Navier-Stokes zonal approach to investigate the unsteady aerodyamics of a multistage compressor. Relative motion between rotors and stators is made possible by use of systems of patched and overlaid grids. Results have been computed for a 2 1/2-stage compressor configuration. The numerical data compares well with experimental data for surface pressures and wake data. In addition, the effect of grid refinement on the solution is studied.

Gundy-Burlet, K. L.↗
NASA NTRS1989

Grid refinement studies of turbine rotor-stator interaction

Results from a three-dimensional, time-accurate Navier-Stokes simulation of rotor-stator interaction in an axial turbine stage are presented. The present study uses a fine grid in the spanwise direction to better resolve endwall and tip cllearance effects and complements coarse-grid calculations that were reported earlier. A realistic turbine stage with 22 stator vanes and 28 rotor blades is simulated as a single-stator, single-rotor airfoil combination with the stator geometry modified to properly account for blockage effects. This is in contrast to the earlier coarse-grid calculations where the rotor geometry was modified. The improved grid resolution and the unmodified rotor geometry result in a more accurate simulation of the flow field, particularly in the rotor channel where the interaction effects are more severe. The numerical results are compared to experimental data wherever possible and to earlier calculations.

Madavan, N. K.↗
NASA NTRS1988

Unsteady aerodynamics of rotor-stator interaction in a turbine stage

The two-dimensional, compressible, unsteady, thin-layer Navier-Stokes equations have been used to study the turbulent flow field of a turbine rotor/stator configuration in the high pressure oxidizer turbopump of the Space Shuttle main engine. The calculations were performed on a system of patched and overlaid grids. The grid system consists of 'O-' and 'H-' grids, with the inner 'O-'grid enclosing the blade surface for an accurate resolution of the leading and trailing edges, while the outer 'H-'grid makes the treatment of boundary conditions easier. The integration scheme used is an iterative, factored, implicit method with numerical fluxes evaluated by the third-order accurate upwind-biased Osher scheme. Computed results in the form of pressure contours, Mach number contours, time-averaged surface pressure, unsteady pressure amplitude and unsteady velocity vectors are presented. Many flow phenomena, such as wake cutting by rotor airfoils and evolution of unsteady passage vortices, are discussed.

Yang, R.-J.↗
NASA NTRS1988

Applications of domain decomposition methods to turbomachinery flows

Domain decomposition techniques can be used to great advantage by computational fluid dynamicists in computing flows about complex geometries and adapting the grid to the solution. These techniques are particularly useful in computing flows about several bodies that are in relative motion such as rotor/stator configurations in turbomachinery or helicopter rotor/fuselage configurations. This paper discusses some of the basic ideas involved in transferring information between subdomains in a multidomain calculation and presents results for a simple rotor/stator configuration.

Rai, M. M.↗
NASA NTRS1986

Three-dimensional, conservative, Euler computations using patched grid systems and explicit methods

The method of 'zonal approach' (in which the flow field is partitioned into regions with independent grids) for computation of flow over complex geometries, such as aircraft configuration, requires application of a grid-interfacing procedure. A three-dimensional conservative, boundary scheme for patched grids, applicable in generalized coordinates for arbitrary point distributions on a planar zonal surface is presented. The computation technique is derived within the framework of the Osher (1983) upwind scheme, using Euler equations. The three-dimensional interfacing method is applied to the computation of flow about a wing-canard combination using a two-zone, patched grid.

Hessenius, K. A.↗
NASA NTRS1986

Patched-grid calculations with the Euler and Navier-Stokes equations: Theory and applications

A patched-grid approach is one in which the flow region of interest is divided into subregions which are then discretized independently using existing grid generator. The equations of motion are integrated in each subregion in conjunction with patch-boundary schemes which allow proper information transfer across interfaces that separate subregions. The patched-grid approach greatly simplifies the treatment of complex geometries and also the addition of grid points to selected regions of the flow. A conservative patch-boundary condition that can be used with explicit, implicit factored and implicit relaxation schemes is described. Several example calculations that demonstrate the capabilities of the patched-grid scheme are also included.

Rai, M. M.↗
NASA NTRS1986

Patched-grid calculations with the Euler and Navier-Stokes equations: Theory and application

The Rai (1984,85) patch-boundary scheme for the Euler equations is described. The integration methods used to update the interior grid points are are discussed. Stability of patch-boundary schemes and the use of these schemes in Navier-Stokes calculations are mentioned. Results for inviscid, supersonic flow over a cylinder, blast wave diffraction by ramp, and the motion of a vortex in a freestream are presented. These test cases demonstrate the quality of solutions possible with the scheme.

Rai, M. M.↗
NASA NTRS1985

A simulation of rotor-stator interaction using the Euler equations and patched grids

An unsteady Euler code to study rotor-stator interaction problem was developed. The code uses patched grids that move relative to each other to simulate the motion of the rotor airfoils with respect to the stator airfoils. The Osher integration scheme is used in conjunction with an implicit relaxation approach. The scheme is second order accurate in space and time, and is also TVD in each spatial direction. The numerical results were found to be periodic in time, thus demonstrating the capability of the integration and zonal schemes in simulating periodic time dependent flow. The pressure contours obtained are almost oscillation free because of the TVD nature of the scheme. A new procedure was developed to simulate flows about bodies that move relative to each other. This capability should prove to be very useful in the areas of rotor-stator interaction, propeller-nacelle interaction, and helicopter rotor-fuselage interaction.

Rai, M. M.↗
NASA NTRS1985

An implicit, conservative, zonal-boundary scheme for Euler equation calculations

A zonal, or patched, grid approach is one in which the flow region of interest is divided into subregions which are then discretized independently, using existing grid generators. The equations of motion are integrated in each subregion in conjunction with zonal boundary schemes which allow proper information transfer across interfaces that separate subregions. The zonal approach greatly simplifies the treatment of complex geometries and also the addition of grid points to selected regions of the flow. A conservative, zonal boundary condition that could be used with explicit schemes was extended so that it can be used with existing second order accurate implicit integration schemes such as the Beam-Warming and Osher schemes. In the test case considered, the implicit schemes increased the rate of convergence considerably (by a factor of about 30 over that of the explicit scheme). Results demonstrating the time accuracy of the zonal scheme and the feasibility of performing calculations on zones that move relative to each other are also presented.

Rai, M. M.↗
NASA NTRS1985

A relaxation approach to patched-grid calculations with the Euler equations

A conservative zonal-boundary condition that was used with explicit integration schemes is extended to implicit, upwind, relaxation schemes; in particular to the Osher scheme. The rate of convergence was found to increase considerably with the use of the implicit, relaxation-zonal scheme when compared to the explicit scheme. The relaxation-zonal scheme has also been used in a time-accurate mode. Results demonstrating the time accuracy of the scheme and the feasibility of performing calculations in cases where some parts of the given system move relative to others (for example, rotor-stator configurations) are presented.

Rai, M. M.↗
NASA NTRS1985

An implicit, conservative, zonal-boundary scheme for Euler equation calculations

A 'zonal', or 'patched-grid', approach is one in which the flow region of interest is divided into subregions which are then discretized independently, using existing grid generators. The equations of motion are integrated in each subregion in conjunction with zonal-boundary schemes which allow proper information transfer across interfaces that separate subregions. The zonal approach greatly simplifies the treatment of complex geometries and also the addition of grid points to selected regions of the flow. In this study a conservative, zonal-boundary condition that could be used with explicit schemes has been extended so that it can be used with existing second-order-accurate implicit integration schemes such as the Beam-Warming and Osher schemes. In the test case considered, the implicit schemes increased the rate of convergence considerably (by a factor of about 30 over that of the explicit scheme). Results demonstrating the time-accuracy of the zonal scheme and the feasibility of performing calculations on zones that move relative to each other are also presented.

Rai, M. M.↗
NASA NTRS1985

Navier-Stokes simulations of rotor-stator interaction using patched and overlaid grids

An accurate numerical analysis of the flows associated with rotor-stator configurations in turbomachinery can be very helpful in optimizing the performance of turbomachinery. In this study the unsteady, thin-layer, Navier-Stokes equations are solved using a system of patched and overlaid grids for a rotor-stator configuration of an axial turbine. The equations necessary for an accurate transfer of information between the several grids are briefly described within the framework of an iterative, implicit algorithm. Results in the form of Mach number contours, time-averaged pressures, unsteady pressures, amplitudes, and phase are presented. The numerical results are also compared with experimental data and the agreement is found to be good.

Rai, M. M.↗