Search NASA⌕ Search

Engineering topics

Rallo, Robert

Publications and source records attributed to Rallo, Robert.

A US perspective on closing the carbon cycle to defossilize difficult-to-electrify segments of our economy

Electrification to reduce or eliminate greenhouse gas emissions is essential to mitigate climate change. However, a substantial portion of our manufacturing and transportation infrastructure will be difficult to electrify and/or will continue to use carbon as a key component, including areas in aviation, heavy-duty and marine transportation, and the chemical industry. In this Roadmap, we explore how multidisciplinary approaches will enable us to close the carbon cycle and create a circular economy by defossilizing these difficult-to-electrify areas and those that will continue to need carbon. Here, we discuss two approaches for this: developing carbon alternatives and improving our ability to reuse carbon, enabled by separations. Furthermore, we posit that co-design and use-driven fundamental science are essential to reach aggressive greenhouse gas reduction targets.

09 BIOMASS FUELS↗

Advanced Research Directions on AI for Energy

This AI for Energy report further details grand challenges that provide significant opportunities for energy applications across nuclear energy, the power grid, carbon management, energy storage, and energy materials over the next decade. The main conclusions and opportunities from this study are available in the Key Findings section of this report.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Preparing for the next pandemic via transfer learning from existing diseases with hierarchical multi-modal BERT: a study on COVID-19 outcome prediction

Abstract Developing prediction models for emerging infectious diseases from relatively small numbers of cases is a critical need for improving pandemic preparedness. Using COVID-19 as an exemplar, we propose a transfer learning methodology for developing predictive models from multi-modal electronic healthcare records by leveraging information from more prevalent diseases with shared clinical characteristics. Our novel hierarchical, multi-modal model ( $${\textsc {TransMED}}$$ T R A N S MED ) integrates baseline risk factors from the natural language processing of clinical notes at admission, time-series measurements of biomarkers obtained from laboratory tests, and discrete diagnostic, procedure and drug codes. We demonstrate the alignment of $${\textsc {TransMED}}$$ T R A N S MED ’s predictions with well-established clinical knowledge about COVID-19 through univariate and multivariate risk factor driven sub-cohort analysis. $${\textsc {TransMED}}$$ T R A N S MED ’s superior performance over state-of-the-art methods shows that leveraging patient data across modalities and transferring prior knowledge from similar disorders is critical for accurate prediction of patient outcomes, and this approach may serve as an important tool in the early response to future pandemics.

59 BASIC BIOLOGICAL SCIENCES↗

CATMoS: Collaborative Acute Toxicity Modeling Suite

Background: Humans are exposed to tens of thousands of chemical substances that need to be assessed for their potential toxicity. Acute systemic toxicity testing serves as the basis for regulatory hazard classification, labeling, and risk management. However, it is cost- and time-prohibitive to evaluate all new and existing chemicals using traditional rodent acute toxicity tests. In silico models built using existing data facilitate rapid acute toxicity predictions without using animals. Objectives: The U.S. Interagency Coordinating Committee on the Validation of Alternative Methods Acute Toxicity Workgroup organized an international collaboration to develop in silico models for predicting acute oral toxicity based on five different endpoints: LD50 value, U.S. Environmental Protection Agency hazard categories, Globally Harmonized System for Classification and Labelling hazard categories, very toxic chemicals (LD50 =50 mg/kg), and non-toxic chemicals (LD50 >2000 mg/kg). Methods: An acute oral toxicity data inventory for 11,992 chemicals was compiled, split into training and evaluation sets, and made available to 35 participating international research groups that submitted a total of 139 predictive models. Predictions that fell within the applicability domains of the submitted models were evaluated using external validation sets. These were then combined into consensus models to leverage strengths of individual approaches. Results: The resulting consensus predictions, which leverage the collective strengths of each individual model, form the Collaborative Acute Toxicity Modeling Suite (CATMoS). CATMoS demonstrated high performance in terms of accuracy and robustness when compared to in vivo results. Discussion: CATMoS is being evaluated by regulatory agencies for its utility and applicability as a potential replacement for in vivo rat acute oral toxicity studies. CATMoS predictions for over 800,000 chemicals have been made available via the NTP’s Integrated Chemical Environment. The models are also implemented in a free, standalone open-source tool, OPERA, which allows predictions of new and untested chemicals to be made.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Distributed heterogeneous compute infrastructure for the study of additive manufacturing systems

We present the current status of a large-scale computing framework to address the need of the multidisciplinary effort to study chemical dynamics. Specifically, we are enabling scientists to process and store experimental data, run large-scale computationally expensive high-fidelity physical simulation, and analyze these results using the state-of-the-art data analytics tools, machine learning, and uncertainty quantification methods using heterogeneous computing resources, such as CPU and GPU cluster. The framework can integrate or abstract out multiple domains based on roles. In order to develop this framework, we have leveraged an existing framework coupled with in-house heterogeneous computing resources. We present the results of using this framework on a single metadata triggered workflow to accelerate an additive manufacturing use case.

heterogeneous computing, hpc, workflows, reproduci↗

Visualizing biomolecular electrostatics in virtual reality with UnityMol-APBS

The APBS software was developed to solve the equations of continuum electrostatics for large biomolecular assemblages. APBS has enjoyed widespread adoption throughout the biomedical community and is used in numerous applications involving biomolecular structures. However, visualization of complex biomolecular electrostatic properties can be challenging for two-dimensional graphics systems. Therefore, advanced visualization and manipulation capabilities have been incorporated. In particular, APBS tools have been integrated with the UnityMolX virtual reality platform to provide an immersive experience for preparing biomolecular systems for calculations as well as visualizing and comparing calculated results.

electrostatics, molecular visualization, solvation↗

Molecular dynamics simulations of zinc oxide solubility: From bulk down to nanoparticles

The solubility of metal oxides is one of the key descriptors for the evaluation of their potential toxic effects, both in the bulk form and in nanoparticulated aggregates. Current work presents a new methodology for the in silico assessment of the solubility of metal oxides, which is demonstrated using a well-studied system, ZnO. The calculation of the solubility is based on statistical thermodynamics tools combined with Density Functional Tight Binding theory for the evaluation of the free energy exchange during the dissolution process. Models of small ZnO clusters are used for describing the final dissolved material, since the complete ionic dissolution of ZnO is hindered by the formation of O2- anions in solution, which are highly unstable. Results show very good agreement between the computed solubility values and experimental data for ZnO bulk, up to 0.5 mg·L-1 and equivalents of 50 g·L-1 for the free Zn2+ cation in solution. However, the reference model for solid nanoparticles formed by free space nanoparticles can only give a limited quantitative solubility evaluation for ZnO nanoparticles.

DFTB modelling↗

Toward computational and experimental characterisation for risk assessment of metal oxide nanoparticles

Metal oxide (MeO) nanoparticles (NPs) have become common in our everyday life over the past years. However, there is still an important knowledge gap regarding their toxicological effect and, in particular, how the different physical and chemical properties of MeO NPs influence their cytotoxicity and the subsequent implications for risk assessment. This work analyses the physicochemical properties of MeO NPs that have been reported as relevant for risk assessment and the experimental and theoretical methods used to obtain them. The surface, physical and chemical properties of NPs have been critically revisited to shed light on the features that can cause toxicity. Due to the large number of existing MeO NPs, in silico studies are necessary to get a good understanding of the NPs' physicochemical properties; therefore this review focuses on the state of the art computational methods used to model MeO NP toxicity: QSAR and QSTR models and their alternative approaches provide a better understanding of MeO NP biological toxicity in organisms.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CompNanoTox2015: novel perspectives from a European conference on computational nanotoxicology on predictive nanotoxicology

A first European Conference on Computational Nanotoxicology, CompNanoTox, was held in November 2015 in Benahavís, Spain with the objectives to disseminate and integrate results from the European modeling and database projects (NanoPUZZLES, ModENPTox, PreNanoTox, MembraneNanoPart, MODERN, eNanoMapper and EU COST TD1204 MODENA) as well as to create synergies within the European NanoSafety Cluster. This conference was supported by the COST Action TD1204 MODENA on developing computational methods for toxicological risk assessment of engineered nanoparticles and provided a unique opportunity for crossfertilization among complementary disciplines. The efforts to develop and validate computational models crucially depend on high quality experimental data and relevant assays which will be the basis to identify relevant descriptors. The ambitious overarching goal of this conference was to promote predictive nanotoxicology, which can only be achieved by a close collaboration between the computational scientists (e.g. database experts, modeling experts for structure, (eco) toxicological effects, performance and interaction of nanomaterials) and experimentalists from different areas (in particular toxicologists, biologists, chemists and material scientists, among others). The main outcome and new perspectives of this conference are summarized here.

nanoqsar↗

Prioritization of in silico models and molecular descriptors for the assessment of ready biodegradability

Ready biodegradability is a key property for evaluating the long-term effects of chemicals on the environment and human health. As such, it is used as a screening test for the assessment of persistent, bioaccumulative and toxic substances. Regulators encourage the use of non-testing methods, such as in silico models, to save money and time. A dataset of 757 chemicals was collected to assess the performance of four freely available in silico models that predict ready biodegradability. They were applied to develop a new consensus method that prioritizes the use of each individual model according to its performance on chemical subsets driven by the presence or absence of different molecular descriptors. This consensus method was capable of almost eliminating unpredictable chemicals, while the performance of combined models was substantially improved with respect to that of the individual models. - Highlights: • Consensus method to predict ready biodegradability by prioritizing multiple QSARs. • Consensus reduced the amount of unpredictable chemicals to less than 2%. • Performance increased with the number of QSAR models considered. • The absence of 2D atom pairs contributed significantly to the consensus model.

54 ENVIRONMENTAL SCIENCES↗