Search NASA⌕ Search

Engineering topics

Ramanathan, M

Publications and source records attributed to Ramanathan, M.

Mesoscale morphologies in polymer thin films.

In the midst of an exciting era of polymer nanoscience, where the development of materials and understanding of properties at the nanoscale remain a major R&D endeavor, there are several exciting phenomena that have been reported at the mesoscale (approximately an order of magnitude larger than the nanoscale). In this review article, we focus on mesoscale morphologies in polymer thin films from the viewpoint of origination of structure formation, structure development and the interaction forces that govern these morphologies. Mesoscale morphologies, including dendrites, holes, spherulites, fractals and honeycomb structures have been observed in thin films of homopolymer, copolymer, blends and composites. Following a largely phenomenological level of description, we review the kinetic and thermodynamic aspects of mesostructure formation outlining some of the key mechanisms at play. We also discuss various strategies to direct, limit, or inhibit the appearance of mesostructures in polymer thin films as well as an outlook toward potential areas of growth in this field of research.

36 MATERIALS SCIENCE↗

Nanopatterning of ultrananocrystalline diamond thin films via block copolymer lithography.

Nanopatterning of diamond surfaces is critical for the development of diamond-based microelectromechanical system/nanoelectromechanical system (MEMS/NEMS), such as resonators or switches. Micro-/nanopatterning of diamond materials is typically done using photolithography or electron beam lithography combined with reactive ion etching (RIE). In this work, we demonstrate a simple process, block copolymer (BCP) lithography, for nanopatterning of ultrananocrystalline diamond (UNCD) films to produce nanostructures suitable for the fabrication of NEMS based on UNCD. In BCP lithography, nanoscale self-assembled polymeric domains serve as an etch mask for pattern transfer. The authors used thin films of a cylinder-forming organic-inorganic BCP, poly(styrene-block-ferrocenyldimethylsilane), PS-b-PFS, as an etch mask on the surface of UNCD films. Orientational control of the etch masking cylindrical PFS blocks is achieved by manipulating the polymer film thickness in concert with the annealing treatment. We have observed that the surface roughness of UNCD layers plays an important role in transferring the pattern. Oxygen RIE was used to etch the exposed areas of the UNCD film underneath the BCP. Arrays of both UNCD posts and wirelike structures have been created using the same starting polymeric materials as the etch mask.

36 MATERIALS SCIENCE↗

Crossover behavior in hydrogen sensing mechanism for palladium ultrathin films.

Palladium has been extensively studied as a material for hydrogen sensors because of the simplicity of its reversible resistance change when exposed to hydrogen gas. Various palladium films and nanostructures have been used, and different responses have been observed with these diverse morphologies. In some cases, such as with nanowires, the resistance will decrease, whereas in others, such as with thick films, the resistance will increase. Each of these mechanisms has been explored for several palladium structures, but the crossover between them has not been systematically investigated. Here we report on a study aimed at deciphering the nanostructure-property relationships of ultrathin palladium films used as hydrogen gas sensors. The crossover in these films is observed at a thickness of {approx} 5 nm. Ramifications for future sensor developments are discussed.

08 HYDROGEN↗

Simple orientational control over cylindrical organic-inorganic block copolymer domains for etch mask applications.

Bottom-up patterning methodologies, predicated on chemical self-assembly, have the potential to transcend limitations associated with more traditional lithographies. By controlling the domain orientation of a cylinder-forming organic-inorganic block copolymer, poly(styrene-block-ferrocenyldimethylsilane), it is possible to straightforwardly fabricate massive arrays of either nanoscale dots or wires out of a film composed of a wide variety of materials. In the work reported here, orientational control is achieved by manipulating the polymer film thickness in concert with the annealing treatment. For films much thinner than the equilibrium periodicity of the microdomains, the cylinders spontaneously orient themselves perpendicular to the substrate. Films with thickness close to the equilibrium periodicity exhibit the more common in-plane orientation following thermal annealing. Solvent annealing leads to an in-plane orientation for the full range of film thicknesses studied. As a demonstration of the effectiveness of this method, semiconductor substrates were patterned with arrays of posts and wires, respectively, using the same starting polymeric material as the etch mask. Compatibility of this polymer with various substrate materials is also demonstrated.

36 MATERIALS SCIENCE↗

Thickness dependent hierarchical meso/nano scale morphologies of a metal-containing block copolymer thin film induced by hybrid annealing and their pattern transfer abilities.

In this paper we describe dewetting phenomena in organic (polystyrene, PS)/inorganic (polyferrocenyldimethylsilane, PFS) block copolymer thin films. Mesoscale dendritic structures are induced when the spin-cast thin film of this polymer is subjected to so-called hybrid annealing, which involves both thermal and solvent annealing. We show that the development and arrangement of these mesoscale dendritic structures depends on the initial film thickness in addition to the annealing time. Importantly, there are two criteria that must be fulfilled to achieve these mesoscale morphologies: (i) the film has to be subjected to hybrid annealing, i.e. either only thermal or only solvent annealing does not produce any notable mesostructures and (ii) both PS and PFS blocks must be present during the thermal and solvent annealing procedures; if one of the blocks, for instance PS, is removed before annealing then there is no mesostructure. Various possible mechanisms for the formation of these structures are discussed and results indicate that the PFS block dominates the structure formation. We also observe a ring- or worm-like nanostructure which develops only when the film is subjected to hybrid annealing at a particular film thickness. Apart from these results, here we demonstrate that mesoscale structures can be successfully transferred onto underlying substrates.

36 MATERIALS SCIENCE↗