Search NASA⌕ Search

Engineering topics

Ramsen, John A

Publications and source records attributed to Ramsen, John A.

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1957

An Experimental Hydrodynamic Investigation of the Inception of Vortex Ventilation

Results are presented from a hydrodynamic investigation of the inception of vortex ventilation on modified-flat-plate rectangular lifting surfaces of aspect ratio 0.25 differing in scale and thickness ratio. Two types of bubble-formation processes are described. Inception speeds were correlated for bubble formation in the high angle-of-attack range by using the Froude number and for that in the low angle-of-attack range by expressing the speed as a function of the thickness ratio.

REYNOLDS NUMBER EFFECTS - COMPLETE WINGS↗
NASA NTRS1957

Hydrodynamic characteristics over a range of speeds up to 80 feet per second of a rectangular modified flat plate having an aspect ratio of 0.25 and operating at several depths of submersion

Results of an investigation of the hydrodynamic characteristics over an extended speed range of a rectangular modified flat plate having an aspect ratio of 0.25 and operating at several depths of submersion are presented. Comparisons between these data and data over a lower speed range on a similar aspect-ratio-0.25 flat plate but having one-half the thickness are presented. These comparisons show no significant differences at the low speeds. At high speeds and high angles of attack, where extensive cavitation was present, the lift coefficients were lower than would have been indicated by the results of the previous investigations and the present investigation at the lower angles of attack. A brief discussion and comparison of ventilation are presented which shows two types of planing bubble formation and the effect of increasing the thickness of the model on the ventilation boundary.

REYNOLDS NUMBER EFFECTS - COMPLETE WINGS↗
NASA NTRS1955

The Hydrodynamic Characteristics of Modified Rectangular Flat Plates Having Aspect Ratios of 1.00, 0.25, and 0.125 and Operating near a Free Water Surface

Report presents the results of an investigation conducted to determine the hydrodynamic forces and moments acting on modified rectangular flat plates with aspect ratios of 1.00, 0.25, and 0.125 mounted on a single strut and operating at several depths of submersion. A simple method has been developed by modification of Falkner's vortex-lattice theory which enables the prediction of the lift characteristics in unseparated flow at large depths. This method shows good agreement with experimental data from the present tests and with aerodynamic data at all angles investigated for aspect ratios of 1.00 and 0.25 and at angles up to 16 degrees for aspect ratio 0.125. Above 16 degrees for aspect ratio 0.125, the predicted lift proved too high.

Wadlin, Kenneth L↗