Search NASA⌕ Search

Engineering topics

Raney, J. P.

Publications and source records attributed to Raney, J. P..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

A methodology for selective removal of orbital debris

Earth-orbiting objects, large enough to be tracked, were surveyed for possible systematic debris removal. Based upon the statistical collision studies of others, it was determined that objects in orbits approximately 1000 km above the Earth's surface are at greatest collisional risk. Russian C-1B boosters were identified as the most important target of opportunity for debris removal. Currently, more than 100 in tact boosters are orbiting the Earth with apogees between 950 km and 1050 km. Using data provided by Energia USA, specific information on the C-1B booster, in terms of rendezvous and capture strategies, was discussed.

Ash, R. L.↗
NASA NTRS1986

Analysis of the effects of firing Orbiter primary reaction control system jets with an attached truss structure

A study was conducted to determine the dynamic effects of firing the orbiter primary reaction control jets during assembly of protoflight space station structure. Maximum longeron compressive load was calculated as a function of jet pulse time length, number of jet pulses, and total torque imposed by the reaction control jets. The study shows that it is possible to fire selected jets to achieve a pitch maneuver without causing failure of the attached structure.

Kaszubowski, M.↗
NASA NTRS1986

A space station Structures and Assembly Verification Experiment, SAVE

The Space Station structure has been baselined to be a 5 M (16.4 ft) erectable truss. This structure will provide the overall framework to attach laboratory modules and other systems, subsystems and utilities. The assembly of this structure represents a formidable EVA challenge. To validate this capability the Space Station Structures/Dynamics Technical Integration Panel (TIP) met to develop the necessary data for an integrated STS structures flight experiment. As a result of this meeting, the Langley Research Center initiated a joint Langley/Boeing Aerospace Company study which supported the structures/dynamics TIP in developing the preliminary definition and design of a 5 M erectable space station truss and the resources required for a proposed flight experiment. The purpose of the study was to: (1) devise methods of truss assembly by astronauts; (2) define a specific test matrix for dynamic characterization; (3) identify instrumentation and data system requirements; (4) determine the power, propulsion and control requirements for the truss on-orbit for 3 years; (5) study the packaging of the experiment in the orbiter cargo bay; (6) prepare a preliminary cost estimate and schedule for the experiment; and (7) provide a list of potential follow-on experiments using the structure as a free flyer. The results of this three month study are presented.

Russell, R. A.↗
NASA NTRS1984

Creating competitive rotorcraft noise technology

Rotorcraft noise includes turbofan engine noise components, as well as noise from the main and tail rotors that is conditioned by the aircraft's various operational modes. Both of the rotors generate loading noise and broadband noise. Another noise contributor is blade/vortex interaction noise, which results when shed vortices are encountered by a following blade, releasing impulsive acoustic energy. Attention is presently given to the experimental and developmental initiatives to be made by a NASA/industry five-year program that began in 1983. Aeroacoustic data acquired from experiments conducted in NASA facilities can be used in the development of empirical noise prediction methods, in the improvement of existing noise prediction methodology, in the evaluation of proposed reduced noise designs, and in the establishment of useful scaling relationships for selected noise-generating mechanisms.

Raney, J. P.↗
NASA NTRS1981

NASA progress in aircraft noise prediction

Some of the essential features of aircraft noise prediction are described and the basis for evaluating its capability and future potential is discussed. A takeoff noise optimizing procedure is described which calculates a minimum noise takeoff procedure subject to multiple site noise constraints.

Raney, J. P.↗
NASA NTRS1981

NASA progress in aircraft noise prediction

Langley Research Center efforts to develop a methodology for predicting the effective perceived noise level (EPNL) produced by jet-powered CTOL aircraft to an accuracy of + or - 1.5 dB are summarized with emphasis on the aircraft noise prediction program (ANOPP) which contains a complete set of prediction methods for CTOL aircraft including propulsion system noise sources, aerodynamic or airframe noise sources, forward speed effects, a layered atmospheric model with molecular absorption, ground impedance effects including excess ground attenuation, and a received noise contouring capability. The present state of ANOPP is described and its accuracy and applicability to the preliminary aircraft design process is assessed. Areas are indicated where further theoretical and experimental research on noise prediction are needed. Topics covered include the elements of the noise prediction problem which are incorporated in ANOPP, results of comparisons of ANOPP calculations with measured noise levels, and progress toward treating noise as a design constraint in aircraft system studies.

Raney, J. P.↗
NASA NTRS1980

Predicted airframe noise levels

Calculated values of airframe noise levels corresponding to FAA noise certification conditions for six aircraft are presented. The aircraft are: DC-9-30; Boeing 727-200; A300-B2 Airbus; Lockheed L-1011; DC-10-10; and Boeing 747-200B. The prediction methodology employed is described and discussed.

Raney, J. P.↗
NASA NTRS1980

An overview of NASA's propeller and rotor noise research

This paper presents a summary of NASA's propeller and rotor noise research. The objective of this research is to develop the technology and data base required to reduce propeller and rotor noise with minimum performance penalties. The status of current research will be described for both low- and high-speed propellers and for helicopter rotors. Recent results and future research thrusts are also discussed

Greene, G. C.↗
NASA NTRS1979

Preliminary noise tradeoff study of a Mach 2.7 cruise aircraft

NASA computer codes in the areas of preliminary sizing and enroute performance, takeoff and landing performance, aircraft noise prediction, and economics were used in a preliminary noise tradeoff study for a Mach 2.7 design supersonic cruise concept. Aerodynamic configuration data were based on wind-tunnel model tests and related analyses. Aircraft structural characteristics and weight were based on advanced structural design methodologies, assuming conventional titanium technology. The most advanced noise prediction techniques available were used, and aircraft operating costs were estimated using accepted industry methods. The 4-engines cycles included in the study were based on assumed 1985 technology levels. Propulsion data was provided by aircraft manufacturers. Additional empirical data is needed to define both noise reduction features and other operating characteristics of all engine cycles under study. Data on VCE design parameters, coannular nozzle inverted flow noise reduction and advanced mechanical suppressors are urgently needed to reduce the present uncertainties in studies of this type.

Mascitti, V. R.↗
NASA NTRS1979

Noise reduction

The turbofan engine's noise-producing components are discussed in terms of efficient and economical noise reduction techniques that do not penalize the engine performance or weight significantly. Specific topics covered include fan noise, acoustic suppression, jet noise technology, combustor noise, and aircraft noise prediction.

Feiler, C. E.↗
NASA NTRS1978

Noise prediction technology for CTOL aircraft

The application of a new aircraft noise prediction program to CTOL noise prediction is outlined. Noise prediction is based on semiempirical methods for each of the propulsive system noise sources, such as the fan, the combustor, the turbine, and jet mixing, with noise-critical parameter values derived from the thermodynamic cycle of the engine. Comparisons of measured and predicted noise levels for existing CTOL aircraft indicate an acceptable level of accuracy.

Raney, J. P.↗
NASA NTRS1978

Noise prediction technology for CTOL aircraft

The application of a new aircraft noise prediction program to CTOL noise prediction is outlined. Noise prediction is based on semiempirical methods for each of the propulsive system noise sources, such as the fan, the combustor, the turbine, and jet mixing, with noise-critical parameter values derived from the thermodynamic cycle of the engine. Comparisons of measured and predicted noise levels for existing CTOL aircraft indicate an acceptable level of accuracy.

Raney, J. P.↗
NASA NTRS1975

Research needs in aircraft noise prediction

Progress needed in understanding the mechanisms of aircraft noise generation and propagation is outlined using the focus provided by the need to predict accurately the noise produced and received at the ground by an aircraft operating in the vicinity of an airport. The components of internal engine noise generation, jet exhaust, airframe noise and shielding and configuration effects, and the roles of atmospheric propagation and ground noise attenuation are presented and related to the prediction problem. The role of NASA in providing the focus and direction for needed advances is discussed, and possible contributions of the academic community in helping to fulfill the needs for accurate aircraft noise prediction methods are suggested.

Raney, J. P.↗
NASA NTRS1975

Development of a new computer system for aircraft noise prediction

The paper presents an overview of the activities of NASA's Aircraft Noise Prediction Office (ANOPO). The principal goal of ANOPO is to develop a comprehensive, user-oriented, Aircraft Noise Prediction Program (ANOPP). ANOPO's activities in support of ANOPP development are briefly discussed. They include acquisition, implementation, and evaluation of an in-house, interim collection of programs and implementation of a plan for acquiring, in the form of Key Technology Documents, state-of-the-art methodology for aircraft noise prediction. The paper is primarily devoted to a presentation of the general architecture and functional capability planned for ANOPP together with the rationale supporting major design decisions.

Raney, J. P.↗
NASA NTRS1974

New computer system for aircraft noise prediction

The purpose of the Aircraft Noise Prediction Office (ANOPO) at Langley Research Center is to provide a focal point for NASA's aircraft noise prediction activities and an appropriate interface with other agencies and industry. An interim prediction system is now in operation, which includes a program for source modeling leading to noise prediction for a single event, two complementary multiple event prediction programs which predict NEF contours on the basis of interpolation of noise, thrust, and altitude data, and the FAA data base for the commercial fleet. An integrated multimode aircraft noise prediction program has been designed, and a mechanism for continuously providing current prediction technology to be incorporated in the program has been implemented.

Raney, J. P.↗
NASA NTRS1972

NASTRAN: A progress report

Significant NASTRAN-related events since September, 1971 are reviewed. The present operation of the NASTRAN systems management office is described, as well as new capabilities and improvements incorporated in Level 15 of NASTRAN, and priorities for future levels of NASTRAN.

Raney, J. P.↗