Engineering topics
Publications and source records attributed to Rapp, Donald.
A report discusses the development of a Mars surface, laboratory-based solar simulator to create solar cells that can function better on Mars. The Mars Optimized Solar cell Technology (MOST) required defining the surface incident spectrum, developing an appropriate laboratory solar simulator measurement capability, and developing and testing commercial cells modified for the Mars surface spectrum.
The unparalleled success of the Mars Exploration Rovers (MER) powered by GaInP/GaAs/Ge triple-junction solar cells has demonstrated a lifetime for the rovers that exceeded the baseline mission duration by more than a factor of five. This provides confidence in future longer-term solar powered missions on the surface of Mars. However, the solar cells used on the rovers are not optimized for the Mars surface solar spectrum, which is attenuated at shorter wavelengths due to scattering by the dusty atmosphere. The difference between the Mars surface spectrum and the AM0 spectrum increases with solar zenith angle and optical depth. The recent results of a program between JPL and Spectrolab to optimize GaInP/GaAs/Ge solar cells for Mars are presented. Initial characterization focuses on the solar spectrum at 60-degrees zenith angle at an optical depth of 0.5. The 60-degree spectrum is reduced to ~1/6 of the AM0 intensity and is further reduced in the blue portion of the spectrum. JPL has modeled the Mars surface solar spectra, modified an X-25 solar simulator, and completed testing of Mars-optimized solar cells previously developed by Spectrolab with the modified X-25 solar simulator. Spectrolab has focused on the optimization of the higher efficiency Ultra Triple-Junction (UTJ) solar cell for Mars. The attenuated blue portion of the spectrum requires the modification of the top sub-cell in the GaInP/GaAs/Ge solar cell for improved current balancing in the triple-junction cell. Initial characterization confirms the predicted increase in power and current matched operation for the Mars surface 60-degree zenith angle solar spectrum.
The unparalleled success of the Mars Exploration Rovers (MER) powered by GaInP/GaAs/Ge triple-junction solar cells has demonstrated a lifetime for the rovers that exceeded the baseline mission duration by more than a factor of five.
We carried out a system analysis of processes for utilization of Mars resources to support human exploration of Mars by production of propellants from indigenous resources. Seven ISRU processes were analyzed to determine mass. power and propellant storage volume requirements. The major elements of each process include C02 acquisition, chemical conversion, and storage of propellants. Based on a figure of merit (the ratio of the mass of propellants that must be brought from Earth in a non-ISRU mission to the mass of the ISRU system. tanks and feedstocks that must be brought from Earth for a ISRU mission) the most attractive process (by far); is one where indigenous Mars water is accessible and this is processed via Sabatier/Electrolysis to methane and oxygen. These processes are technically relatively mature. Other processes with positive leverage involve reverse water gas shift and solid oxide electrolysis.
A flight-prototype zeolite adsorption compressor is being developed as a reliable, efficient, cost-effective means of extracting and compressing atmospheric C02 on the surface of Mars for use as the first stage of a Mars in-sity C02 to 02 chemical conversion process.
Warping of precise composite-material (graphite-fiber/epoxy-matrix) laminated panels reduced, according to proposal, by improved combination of design and method of fabrication. Essence of proposal to stack plies during fabrication in such pattern that effects of unavoidable ply-orientation errors in individual layers cancel each other out, on whole, in final product. Emerged from study of warping of composite-material laminated face sheets undergoing development for use as lightweight substrates for precise, curved mirrors in submillimeter-wave astronomical telescopes and optical communication systems.
Report presents comparative study of several proposed astronomical observatories intended to operate in infrared and submillimeter wavelength range. Observatories would be, spaceborne, airborne, and Earth-based.
Report proposes use of multiple shades to prevent solar heating of infrared telescope in high orbit around Earth. Shades part of lightweight stowable structure deployed by inflating it. Shades oriented so as not to interfere with field of view of telescope. In conjunction with telescope design providing for passive self-cooling by radiation to outer space in directions away from sun, multilayer shade design with provision for similar radiative cooling enables telescope to reach low temperature in range of 10 to 30 K.
Report surveys methods of measuring coefficients of thermal expansion of materials.
An evaluation is made of the potential benefits of C60 molecules as a basis for ion propulsion. Because C60 is storable, its use may result in a larger usable propellant fraction than previous methods of cluster ion propulsion. C60 may also relax such engineering constraints as grid spacing, which restrict the performance of noble gas ion propulsion. The behavior of C60 in a plasma discharge environment, as well as various electron impact cross sections of the molecule, will greatly afftect the feasibility of the concept.
The potential of active structures technology for future IR and sub-mm telescopes deployed in space is discussed. A space infrared telescope with an aperture of at least 8 m, operating at about 50 k with surface precision better that 0.5 microns is required for future work in space IR and sub-mm astronomy. Telescope parameters, noise, and sensitivity are discussed. The effects of large scale figure errors are examined and conceptual designs of future space IR and sub-mm telescopes are presented. Possible uses of active structures technology and feedback control in future IR and sub-mm space observatories are suggested.
This paper discusses the application of active structures technology to the control of precision structures for future space-based astrophysics observatories. The state of the art in active structures is reviewed and technology developments applicable to large optical systems are discussed.