Search NASA⌕ Search

Engineering topics

Rashid, Reem B.

Publications and source records attributed to Rashid, Reem B..

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Semiconducting Two‐Dimensional Polymer as an Organic Electrochemical Transistor Active Layer

Abstract Organic electrochemical transistors (OECTs) are devices with broad potential in bioelectronic sensing, circuits, and neuromorphic hardware. Their unique properties arise from the use of organic mixed ionic/electronic conductors (OMIECs) as the active channel. Typical OMIECs are linear polymers, where defined and controlled microstructure/morphology, and reliable characterization of transport and charging can be elusive. Semiconducting two‐dimensional polymers (2DPs) present a new avenue in OMIEC materials development, enabling electronic transport along with precise control of well‐defined channels ideal for ion transport/intercalation. To this end, a recently reported 2DP, TIIP, is synthesized and patterned at 10 µm resolution as the channel of a transistor. The TIIP films demonstrate textured microstructure and show semiconducting properties with accessible oxidation states. Operating in an aqueous electrolyte, the 2DP‐OECT exhibits a device‐scale hole mobility of 0.05 cm 2 V –1 s –1 and a µ C * figure of merit of 1.75 F cm –1 V –1 s –1 . 2DP OMIECs thus offer new synthetic degrees of freedom to control OECT performance and may enable additional opportunities such as ion selectivity or improved stability through reduced morphological modulation during device operation.

2D-polymer↗
DOE OSTI2022

Synthetic Nuances to Maximize n-Type Organic Electrochemical Transistor and Thermoelectric Performance in Fused Lactam Polymers

A series of fully fused n-type mixed conduction lactam polymers p(g 7 NC n N), systematically increasing the alkyl side chain content, are synthesized via an inexpensive, nontoxic, precious-metal-free aldol polycondensation. Employing these polymers as channel materials in organic electrochemical transistors (OECTs) affords state-of-the-art n-type performance with p(g 7 NC 10 N) recording an OECT electron mobility of 1.20 x 10 -2 cm 2 V -1 s -1 and a μC* figure of merit of 1.83 F cm -1 V -1 s -1. In parallel to high OECT performance, upon solution doping with (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine (N-DMBI), the highest thermoelectric performance is observed for p(g 7 NC 4 N), with a maximum electrical conductivity of 7.67 S cm -1 and a power factor of 10.4 μWm -1 K -2 . These results are among the highest reported for n-type polymers. Importantly, while this series of fused polylactam organic mixed ionic-electronic conductors (OMIECs) highlights that synthetic molecular design strategies to bolster OECT performance can be translated to also achieve high organic thermoelectric (OTE) performance, a nuanced synthetic approach must be used to optimize performance. Herein, we outline the performance metrics and provide new insights into the molecular design guidelines for the next generation of high-performance n-type materials for mixed conduction applications, presenting for the first time the results of a single polymer series within both OECT and OTE applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

From p- to n-Type Mixed Conduction in Isoindigo-Based Polymers through Molecular Design

Organic mixed ionic and electronic conductors are of significant interest for bioelectronic applications. Here, we use three different isoindigoid building blocks to obtain polymeric mixed conductors with vastly different structural and electronic properties which can be further fine-tuned through the choice of comonomer unit. We show how careful design of the isoindigoid scaffold can afford highly planar polymer structures with high degrees of electronic delocalization, while subtle structural modifications can control the dominant charge carrier (hole or electron) when probed in organic electrochemical transistors. We employ a combination of experimental and computational techniques to probe electrochemical, structural and mixed ionic and electronic properties of the polymer series which in turn allows us to derive important structure-property relations for this promising class of materials in the context of organic bioelectronics. Ultimately, we use these findings to outline robust molecular design strategies for isoindigo-based mixed conductors that can support efficient p-type, n-type and ambipolar transistor operation in an aqueous environment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

n ‐Type Rigid Semiconducting Polymers Bearing Oligo(Ethylene Glycol) Side Chains for High‐Performance Organic Electrochemical Transistors

Abstract N‐type conjugated polymers as the semiconducting component of organic electrochemical transistors (OECTs) are still undeveloped with respect to their p‐type counterparts. Herein, we report two rigid n‐type conjugated polymers bearing oligo(ethylene glycol) (OEG) side chains, PgNaN and PgNgN, which demonstrated an essentially torsion‐free π‐conjugated backbone. The planarity and electron‐deficient rigid structures enable the resulting polymers to achieve high electron mobility in an OECT device of up to the 10 −3 cm 2 V −1 s −1 range, with a deep‐lying LUMO energy level lower than −4.0 eV. Prominently, the polymers exhibited a high device performance with a maximum dimensionally normalized transconductance of 0.212 S cm −1 and the product of charge‐carrier mobility μ and volumetric capacitance C* of 0.662±0.113 F cm −1 V −1 s −1 , which are among the highest in n‐type conjugated polymers reported to date. Moreover, the polymers are synthesized via a metal‐free aldol‐condensation polymerization, which is beneficial to their application in bioelectronics.

Chen, Xingxing↗
DOE OSTI2020

Semiconducting Small Molecules as Active Materials for p-Type Accumulation Mode Organic Electrochemical Transistors

A series of semiconducting small molecules with bithiophene or bis-3,4-ethylenedioxythiophene cores are designed and synthesized. The molecules display stable reversible oxidation in solution and can be reversibly oxidized in the solid state with aqueous electrolyte when functionalized with polar triethylene glycol side chains. Evidence of promising ion injection properties observed with cyclic voltammetry is complemented by strong electrochromism probed by spectroelectrochemistry. Blending these molecules with high molecular weight polyethylene oxide (PEO) is found to improve both ion injection and thin film stability. The molecules and their corresponding PEO blends are investigated as active layers in organic electrochemical transistors (OECTs). For the most promising molecule:polymer blend (P4E4:PEO), p-type accumulation mode OECTs with µA drain currents, μS peak transconductances, and a µC* figure-of-merit value of 0.81 F V -1 cm -1 s -1 are obtained.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Energetic Control of Redox-Active Polymers toward Safe Organic Bioelectronic Materials

Avoiding faradaic side reactions during the operation of electrochemical devices is important to enhance the device stability, to achieve low power consumption, and to prevent the formation of reactive side-products. This is particularly important for bioelectronic devices, which are designed to operate in biological systems. While redox-active materials based on conducting and semiconducting polymers represent an exciting class of materials for bioelectronic devices, they are susceptible to electrochemical side-reactions with molecular oxygen during device operation. In this work, electrochemical side reactions with molecular oxygen are shown to occur during organic electrochemical transistor (OECT) operation using high-performance, state-of-the-art OECT materials. Depending on the choice of the active material, such reactions yield hydrogen peroxide (H 2 O 2 ), a reactive side-product, which may be harmful to the local biological environment and may also accelerate device degradation. A design strategy is reported for the development of redox-active organic semiconductors based on donor–acceptor copolymers that prevents the formation of H 2 O 2 during device operation. This study elucidates the previously overlooked side-reactions between redox-active conjugated polymers and molecular oxygen in electrochemical devices for bioelectronics, which is critical for the operation of electrolyte-gated devices in application-relevant environments.

36 MATERIALS SCIENCE↗