Engineering topics

Ratajczak, A. F.

Publications and source records attributed to Ratajczak, A. F..

35 records · Page 2

NASA NTRS1977

Solar cell shingle

A solar cell shingle was made of an array of solar cells on a lower portion of a substantially rectangular shingle substrate made of fiberglass cloth or the like. The solar cells may be encapsulated in flourinated ethylene propylene or some other weatherproof translucent or transparent encapsulant to form a combined electrical module and a roof shingle. The interconnected solar cells were connected to connectors at the edge of the substrate through a connection to a common electrical bus or busses. An overlap area was arranged to receive the overlap of a cooperating similar shingle so that the cell portion of the cooperating shingle may overlie the overlap area of the roof shingle. Accordingly, the same shingle serves the double function of an ordinary roof shingle which may be applied in the usual way and an array of cooperating solar cells from which electrical energy may be collected.

Forestieri, A. F.↗

NASA NTRS1977

Photovoltaic-powered refrigerator experiment at Isle Royale National Park

The use of a photovoltaic power system to operate an electric refrigerator at a trail construction camp at Isle Royale, Michigan is investigated. The use of P/V power for refrigeration in a remote installation is demonstrated. System design as well as predicted and measured system performance are presented.

Ratajczak, A. F.↗

NASA NTRS1975

Solar power roof shingle

Silicon solar cell module provides both all-weather protection and electrical power. Module consists of array of circular silicon solar cells bonded to fiberglass substrate roof shingle with fluorinated ethylene propylene encapsulant.

Forestieri, A. F.↗

NASA NTRS1975

FEP-TEFLON encapsulated solar cell modules Further progress

A progress report, starting with November 1973, is given in the design, development, and performance of lightweight flexible FET (Fluorinated Ethylene Propylene) encapsulated solar cell modules intended to form standardized building blocks for large roll-up or fold-up solar cell blankets with performances on the order of 100 W/sq m and 80 W/kg in near space. It is shown that interconnected FEP encapsulated modules of advanced design can withstand all typical ground handling, assembly, storage, and launch conditions, and are well suited for high-power space applications.

Rauschenbach, H. S.↗

NASA NTRS1974

Terrestrial applications of FEP-encapsulated solar cell modules

FEP-encapsulated solar cell modules and arrays have been designed and built expressly for terrestrial applications. System design including solar cell array mechanical design and the approach to system sizing is outlined. Such solar cell systems have been installed at six sites. Individual modules have undergone marine environment tests. Results from seven months of operation indicate that the system is meeting its electrical design requirements. No mechanical degradation has been reported. An array on Mammoth Mountain, California has been damaged by rime ice but shows no loss in electrical output. Marine environment tests on single modules have shown that elements of the module must be completely sealed by the FEP. Based on the limited test data available, the FEP-encapsulated solar cell module appears well suited to terrestrial applications.

Forestieri, A. F.↗

NASA NTRS1974

Status of FEP encapsulated solar cell modules used in terrestrial applications

The Lewis Research Center has been engaged in transferring the FEP encapsulated solar cell technology developed for the space program to terrestrial applications. FEP encapsulated solar cell modules and arrays were designed and built expressly for terrestrial applications. Solar cell power systems were installed at three different land sites, while individual modules are undergoing marine environment tests. Four additional power systems are being completed for installation during the summer of 1974. These tests have revealed some minor problems which have been corrected. The results confirm the inherent utility of FEP encapsulated terrestrial solar cell systems.

Ratajczak, A. F.↗

NASA NTRS1974

Terrestrial applications of FEP-encapsulated solar cell modules

FEP-encapsulated solar cell modules and arrays have been designed and built expressly for terrestrial applications. System design including solar cell array mechanical design and the approach to system sizing is outlined. Such solar cell systems have been installed at six sites. Individual modules have undergone marine environment tests. Results from seven months of operation indicate that system is meeting its electrical design requirements. No mechanical degradation has been reported. The array on Mammoth Mountain, California has been damaged by rime ice but shows no loss in electrical output. Marine environment tests on single modules have shown that elements of the module must be completely sealed by the FEP. Based on the limited test data available, the FEP-encapsulated solar cell module appears well suited to terrestrial applications.

Forestieri, A. F.↗

NASA NTRS1974

FEP-Teflon covered solar cell array advancements

Progress is reported on the design and development of lightweight, flexible, FEP encapsulated solar cell modules. Such modules are intended to form standardized building blocks for larger roll-up or fold-up solar cell blankets having specific performance in the order of 100 W/sq m and 80 W/kg in space near earth. Modules are constructed by heat-laminating interconnected 200-micron thick single crystal silicon solar cells with solderless front and back contacts between two layers of clear FEP. The outer FEP layer is 125 microns thick and serves as the solar cell cover material. The inner layer is 50 microns thick and serves as the adhesive between the solar cells and a 25-micron thick loadbearing Kapton substrate sheet.

Rauschenbach, H. S.↗

NASA NTRS1974

Status of FEP encapsulated solar cell modules used in terrestrial applications

FEP (fluorinated ethylene propylene) encapsulated solar cell modules and arrays have been designed and built expressly for terrestrial applications. Solar cell power systems have been installed at three different land sites, while individual modules are undergoing marine-environment tests. Four additional power systems are being completed for installation during the summer of 1974. These tests have revealed some minor problems which have been corrected. The results confirm the inherent utility of FEP encapsulated terrestrial solar cell systems.

Ratajczak, A. F.↗

NASA NTRS1974

Terrestrial applications of FEP-encapsulated solar cell modules

The NASA-Lewis Research Center program of transferring the FEP-encapsulated solar cell technology developed for the space program to terrestrial applications is presented. The electrical power system design and the array mechanical design are described, and power systems being tested are discussed. The latter are located at NOAA-RAMOS weather stations at Sterling, Va., and Mammoth Mountain, Calif.; on the roof of the Lewis Research Center; on a NOAA-Coast Guard buoy in the Gulf of Mexico; in a U.S. Forest Service mountaintop voice repeater station in the Inyo National Forest, Calif., and in a backpack charger for portable transmitter/receivers being used in the same place. Preliminary results of testing are still incomplete, but show that rime ice can cause cracks in modular cells without damaging the FEP though, which keeps the grid lines intact, and that electrically active elements of the module must be completely sealed from salt water to prevent FEP delamination.

Forestieri, A. F.↗

NASA NTRS1971