Search NASA⌕ Search

Engineering topics

Ratliff, J. M.

Publications and source records attributed to Ratliff, J. M..

15 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Ballistic Limit Equation for Single Wall Titanium

Hypervelocity impact tests and hydrocode simulations were used to determine the ballistic limit equation (BLE) for perforation of a titanium wall, as a function of wall thickness. Two titanium alloys were considered, and separate BLEs were derived for each. Tested wall thicknesses ranged from 0.5mm to 2.0mm. The single-wall damage equation of Cour-Palais [ref. 1] was used to analyze the Ti wall's shielding effectiveness. It was concluded that the Cour-Palais single-wall equation produced a non-conservative prediction of the ballistic limit for the Ti shield. The inaccurate prediction was not a particularly surprising result; the Cour-Palais single-wall BLE contains shield material properties as parameters, but it was formulated only from tests of different aluminum alloys. Single-wall Ti shield tests were run (thicknesses of 2.0 mm, 1.5 mm, 1.0 mm, and 0.5 mm) on Ti 15-3-3-3 material custom cut from rod stock. Hypervelocity impact (HVI) tests were used to establish the failure threshold empirically, using the additional constraint that the damage scales with impact energy, as was indicated by hydrocode simulations. The criterion for shield failure was defined as no detached spall from the shield back surface during HVI. Based on the test results, which confirmed an approximately energy-dependent shield effectiveness, the Cour-Palais equation was modified.

Ratliff, J. M.↗
NASA NTRS2005

Saturn Radiation (SATRAD) Model

The Saturnian radiation belts have not received as much attention as the Jovian radiation belts because they are not nearly as intense-the famous Saturnian particle rings tend to deplete the belts near where their peak would occur. As a result, there has not been a systematic development of engineering models of the Saturnian radiation environment for mission design. A primary exception is that of Divine (1990). That study used published data from several charged particle experiments aboard the Pioneer 1 1, Voyager 1, and Voyager 2 spacecraft during their flybys at Saturn to generate numerical models for the electron and proton radiation belts between 2.3 and 13 Saturn radii. The Divine Saturn radiation model described the electron distributions at energies between 0.04 and 10 MeV and the proton distributions at energies between 0.14 and 80 MeV. The model was intended to predict particle intensity, flux, and fluence for the Cassini orbiter. Divine carried out hand calculations using the model but never formally developed a computer program that could be used for general mission analyses. This report seeks to fill that void by formally developing a FORTRAN version of the model that can be used as a computer design tool for missions to Saturn that require estimates of the radiation environment around the planet. The results of that effort and the program listings are presented here along with comparisons with the original estimates carried out by Divine. In addition, Pioneer and Voyager data were scanned in from the original references and compared with the FORTRAN model s predictions. The results were statistically analyzed in a manner consistent with Divine s approach to provide estimates of the ability of the model to reproduce the original data. Results of a formal review of the model by a panel of experts are also presented. Their recommendations for further tests, analyses, and extensions to the model are discussed.

Garrett, H. B.↗
NASA NTRS2005

Saturn radiation (SATRAD) model

The Saturnian radiation belts have not received as much attention as the Jovian radiation belts because they are not nearly as intense—the famous Saturnian particle rings tend to deplete he belts near where their peak would occur. As a result, there has not been a systematic development of engineering models of the Saturnian radiation environment for mission design. A primary exception is that of Divine (1990). That study used published data from several charged particle experiments aboard the Pioneer 11, Voyager 1, and Voyager 2 spacecraft during their flybys at Saturn to generate numerical models for the electron and proton radiation belts between 2.3 and 13 Saturn radii. The Divine Saturn radiation model described the electron distributions at energies between 0.04 and 10 MeV and the proton distributions at energies between 0.14 and 80 MeV. The model was intended to predict particle intensity, flux, and fluence for the Cassini orbiter. Divine carried out hand calculations using the model but never formally developed a computer program that could be used for general mission analyses. This report seeks to fill that void by formally developing a FORTRAN version of the model that can be used as a computer design tool for missions to Saturn that require estimates of the radiation environment around the planet. The results of that effort and the program listings are presented here along with comparisons with the original estimates carried out by Divine. In addition, Pioneer and Voyager data were scanned in from the original references and compared with the FORTRAN model’s predictions. The results were statistically analyzed in a manner consistent with Divine’s approach to provide estimates of the ability of the model to reproduce the original data. Results of a formal review of the model by a panel of experts are also presented. Their recommendations for further tests, analyses, and extensions to the model are discussed.

Evans, R. W.↗
NASA NTRS2003

Status of Galileo interim radiation electron model

Measurements of the high energy, omni-directional electron environment by the Galileo spacecraft Energetic Particle Detector (EDP) were used to develop a new model of Jupiter's trapped electron radiation in the jovian equatorial plane for the range 8 to 16 Jupiter radii.

Galileo radiation model Jupiter radiation↗
NASA NTRS1995

Single Event Upset Effects on the Clementine Solid State Data Recorder

The sensitivity of the Clementine 2.1 Gbit Solid State Data Recorder (SSDR) to single event upsets was characterized in ground tests. Subsequent in-situ measurements of the ambient radiation environment by experiments on-board Clementine permitted evaluation of the ability of models of the single event phenomenon in the SSDR to be tested using actual data. Initial results from the analysis reveal a nearly constant background upset rate of ~71 bit flips/day for the SSDR. There is no obvious correlation with a solar proton event recorded by Clementine and several other spacecraft on 20-21 February 1994, indicating that the SSDR was not sensitive to protons. The constant rate is thus interpreted as being a function of the Galactic Cosmic Ray heavy ion environment. A pronounced lunar orbit altitude dependence has also been identified in the data though the cause has not yet been unambiguously identified.

Clementine↗
NASA NTRS1991

Electron impact excitation and dissociation of N2 via the b 1Pi(u) state

Electron impact excitation of the b 1Pi(u) state in N2 plays a prominent role in the dissociation of the molecule and thus in the production of atomic nitrogen in planetary atmospheres. Electron impact excitation cross sections combined with electron-impact-induced fluorescence measurements can yield the corresponding dissociation cross sections. Serious discrepancies exist among excitation cross sections reported in the literature. To clarify the situation, these cross sections were measured at two impact energies using electron energy loss spectroscopy. The new results are in agreement with recent values deduced from optical measurements and fall midway between previous results which are too high or low by factors of 2.

Ratliff, J. M.↗
NASA NTRS1990

Electron impact excitation of coronene

A preliminary study of the electron-impact excitation of thermally evaporated coronene at 550 C was carried out using electron-energy-loss spectroscopy. Measurements of the energy-loss spectra of coronene at high (100 eV) and low (5-20 eV) impact energies are presented. One of the high-energy spectra was converted to an apparent generalized oscillator strength spectrum and compared to the photoabsorption spectrum of coronene. Observations concerning vibrational excitation of coronene by electron impact are also presented and discussed.

Khakoo, M. A.↗