Search NASA⌕ Search

Engineering topics

Rebekah A. Austin

Publications and source records attributed to Rebekah A. Austin.

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Si5345, SY88422L, LT3482, and MSK130 components Total Ionizing Dose Test Report

The purpose of this test was to characterize the SI-5345, SY88422L, LT3482 and MSK130 parameter degradation for total dose response. The components are associated with REAG ID #21-024. In the test, each device was exposed to high dose rate (HDR) irradiation using gamma radiation. Device parameters such as leakage currents, timing, and overall chip health were investigated. These devices were tested for an interstellar mission on a trajectory between 0.9 AU and 5.3 AU with a 2.5-year mission, yielding an expected overall dose of 29 krad(Si)behind 1 mm of aluminum shielding (at 95% confidence; environment and dose determined through SPENVIS). This test report gives an initial look at candidate parts. Extremely small sample sizes (only 1 or 2 devices tested) do not allow consideration of part-to-part variability. High dose rates were used despite LT3482 and MSK130 having potential enhanced low dose rate sensitivity (ELDRS). Care should be taken in interpreting results given these limitations.

Total Ionizing Dose (TID)↗
NASA NTRS2019

Inclusion of Radiation Environment Variability for Reliability Estimates for SiC Power MOSFETs

Variability of the solar energetic particle environment is investigated for single-event-burnout reliability of silicon-carbide power metal-oxide-semiconductor field effect transistors. A probabilistic assessment of failure evaluates the benefits of de-rating voltage, shielding, and mission length. The Prediction of Solar particle Yields for Characterizing Integrating Circuits code is used to calculate a cumulative density function for the fluence of the environment. The lethal ion method is then used to determine what proportion of the environment will cause single-event-burnout. The operating voltage determines the lowest linear-energy-transfer particle that will cause single-event-burnout and that should be included in the environment distribution. The shielding and mission length also determine the final environment distribution of the mission fluence. Through calculating the reliability for different operating voltages, shielding, and mission length for a specific device, it is shown that shielding thickness and operating voltage have a large effect on reliability and can be traded off during the design.

Heavy ion↗
NASA NTRSDate not supplied

Connecting Mission Profiles and Radiation Vulnerability Assessment

Radiation vulnerability assessment early in spacecraft development is cheaper and faster than in late development phases. RGENTIC and SEAM are two software platforms that can be coupled to provide this type of early assessment. Specifically, RGENTIC is a tool that outputs descriptions of radiation risks based on a selected mission environment and the system’s electronic part portfolio, while SEAM models how radiation-induced faults in electronic parts propagate through a system. In this work, we propose a spacecraft evaluation flow where RGENTIC’s outputs, which are radiation vulnerabilities of electronic parts for a given mission, become inputs to SEAM, resulting in an automatic part-type template palette presented to users so that they can easily begin modeling the occurrence and propagation of radiation-induced faults in their spacecraft. In this context, fault propagation modeling shows how radiation effects impact the spacecraft’s electronics.

Richard H. Nederlande↗