Engineering topics

Reddy, A. S. S. R.

Publications and source records attributed to Reddy, A. S. S. R..

32 records · Page 2

NASA NTRS1983

On the shape and orientation control of orbiting shallow spherical shell structure

The dynamics of orbiting shallow flexible spherical shell structures under the influence of control actuators was studied. Control laws are developed to provide both attitude and shape control of the structure. The elastic modal frequencies for the fundamental and lower modes are closely grouped due to the effect of the shell curvature. The shell is gravity stabilized by a spring loaded dumbell type damper attached at its apex. Control laws are developed based on the pole clustering techniques. Savings in fuel consumption can be realized by using the hybrid shell dumbbell system together with point actuators. It is indicated that instability may result by not including the orbital and first order gravity gradient effects in the plant prior to control law design. Previously announced in STAR as N82-17243

Bainum, P. M.↗

NASA NTRS1982

The dynamics and control of large flexible space structures-V

A general survey of the progress made in the areas of mathematical modelling of the system dynamics, structural analysis, development of control algorithms, and simulation of environmental disturbances is presented. The use of graph theory techniques is employed to examine the effects of inherent damping associated with LSST systems on the number and locations of the required control actuators. A mathematical model of the forces and moments induced on a flexible orbiting beam due to solar radiation pressure is developed and typical steady state open loop responses obtained for the case when rotations and vibrations are limited to occur within the orbit plane. A preliminary controls analysis based on a truncated (13 mode) finite element model of the 122m. Hoop/Column antenna indicates that a minimum of six appropriately placed actuators is required for controllability. An algorithm to evaluate the coefficients which describe coupling between the rigid rotational and flexible modes and also intramodal coupling was developed and numerical evaluation based on the finite element model of Hoop/Column system is currently in progress.

Bainum, P. M.↗

NASA NTRS1982

On the modelling and simulation of the dynamics and control of large flexible orbiting systems

This paper attempts to review the steps involved in the development of mathematical models that can be used to simulate the in-orbit dynamics of large flexible systems. The use of graph theoretic techniques can often be used to reduce the computational effort involved for calculating the eigenvalues of large ordered systems. Computer generated graphical techniques may provide additional insight into the understanding of elastic modal shape functions of complex systems. Finally the numerical techniques commonly used to develop shape and attitude control laws will be briefly reviewed.

Bainum, P. M.↗

NASA NTRS1982

On the shape and orientation control of an orbiting shallow spherical shell structure

The dynamics of orbiting shallow flexible spherical shell structures under the influence of control actuators was studied. Control laws are developed to provide both attitude and shape control of the structure. The elastic modal frequencies for the fundamental and lower modes are closely grouped due to the effect of the shell curvature. The shell is gravity stabilized by a spring loaded dumbbell type damper attached at its apex. Control laws are developed based on the pole clustering techniques. Savings in fuel consumption can be realized by using the hybrid shell dumbbell system together with point actuators. It is indicated that instability may result by not including the orbital and first order gravity gradient effects in the plant prior to control law design.

Bainum, P. M.↗

NASA NTRS1982

Controllability of inherently damped large flexible space structures

Graph theoretic techniques are used to study controllability of linear systems which represent large flexible orbiting space systems with inherent damping. The controllability of the pair of matrices representing the system state and control influence matrices is assured when all states in the model are reachable in a digraph sense from at least one input and also when the term rank of a Boolean matrix whose non trivial components are based on the state and control influence matrices has a term rank of the order of the state vector. The damping matrix does not influence the required number of actuators but gives flexibility to the possibility locations of the actuators for which the system is controllable.

Reddy, A. S. S. R.↗

NASA NTRS1981

The dynamics and control of large flexible space structures

The dynamics and attitude and shape control of very large, inherently flexible spacecraft systems were investigated. Increasingly more complex examples were examined, beginning with a uniform free-free beam, next a free-free uniform plate/platform and finally by considering a thin shallow spherical shell structure in orbit. The effects devices were modeled. For given sets of assumed actuator locations, the controllability of these systems was first established. Control laws for each of the actuators were developed based on decoupling techniques (including distributed modal control) pole placement algorithms and a application of the linear regulator problem for optical control theory.

Bainum, P. M.↗

NASA NTRS1981

The dynamics and control of large flexible space structures-IV

The effects of solar radiation pressure as the main environmental disturbance torque were incorporated into the model of the rigid orbiting shallow shell and computer simulation results indicate that within the linear range the rigid modal amplitudes are excited in proportion to the area to mass ratio. The effect of higher order terms in the gravity-gradient torque expressions previously neglected was evaluated and found to be negligible for the size structures under consideration. A graph theory approach was employed for calculating the eigenvalues of a large flexible system by reducing the system (stiffness) matrix to lower ordered submatrices. The related reachability matrix and term rank concepts are used to verify controllability and can be more effective than the alternate numerical rank tests. Control laws were developed for the shape and orientation control of the orbiting flexible shallow shell and numerical results presented.

Bainum, P. M.↗

NASA NTRS1981

On the shape and orientation control of an orbiting shallow spherical shell structure

A proposed method for controlling the shape and orientation of very large shallow dish type receiver/reflectors to be used in communication, radiometry and in electronic orbital based mail systems involves connecting a rigid light weight dumbell with heavy tip masses to the shell at its apex by a spring loaded double gimballed joint with dampling. To completely damp the system transient motion in all of the important lower frequency modes, an active control system is required. A mathematical model is extended to include the effects of point actuators located at preselected positions on the shell surface. The formulation of the uncontrolled dynamics assumes an a priori knowledge of the frequencies of all the elastic modes to be incorporated within the system model. As an example, three rigid body modes and six elastic modes are included in the model and six actuators are assumed, none of which lies on a nodal line or circle.

Bainum, P. M.↗

NASA NTRS1981

Graph theory approach to the eigenvalue problem of large space structures

Graph theory is used to obtain numerical solutions to eigenvalue problems of large space structures (LSS) characterized by a state vector of large dimensions. The LSS are considered as large, flexible systems requiring both orientation and surface shape control. Graphic interpretation of the determinant of a matrix is employed to reduce a higher dimensional matrix into combinations of smaller dimensional sub-matrices. The reduction is implemented by means of a Boolean equivalent of the original matrices formulated to obtain smaller dimensional equivalents of the original numerical matrix. Computation time becomes less and more accurate solutions are possible. An example is provided in the form of a free-free square plate. Linearized system equations and numerical values of a stiffness matrix are presented, featuring a state vector with 16 components.

Reddy, A. S. S. R.↗

NASA NTRS1980

Control of a large flexible platform in orbit

The dynamics and attitude and shape control of a large thin flexible platform in orbit are studied. Attitude and shape control is assumed to result from actuators placed perpendicular to the main surface and one edge and their effect on the rigid body and elastic modes is modelled to first order. The equations of motion are linearized about nominal orientations where the undeformed plate follows either the local vertical or local horizontal. The stability of the uncontrolled system is investigated analytically. Once controllability is established for a set of actuator locations, control law development is based on pole placement, decoupling, and linear optimal control theory.

Reddy, A. S. S. R.↗

NASA NTRS1980

The dynamics and control of large flexible space structures, 3. Part A: Shape and orientation control of a platform in orbit using point actuators

The dynamics, attitude, and shape control of a large thin flexible square platform in orbit are studied. Attitude and shape control are assumed to result from actuators placed perpendicular to the main surface and one edge and their effect on the rigid body and elastic modes is modelled to first order. The equations of motion are linearized about three different nominal orientations: (1) the platform following the local vertical with its major surface perpendicular to the orbital plane; (2) the platform following the local horizontal with its major surface normal to the local vertical; and (3) the platform following the local vertical with its major surface perpendicular to the orbit normal. The stability of the uncontrolled system is investigated analytically. Once controllability is established for a set of actuator locations, control law development is based on decoupling, pole placement, and linear optimal control theory. Frequencies and elastic modal shape functions are obtained using a finite element computer algorithm, two different approximate analytical methods, and the results of the three methods compared.

Bainum, P. M.↗

NASA NTRS1979

The dynamics and control of large flexible space structures, 2. Part A: Shape and orientation control using point actuators

The equations of planar motion for a flexible beam in orbit which includes the effects of gravity gradient torques and control torques from point actuators located along the beam was developed. Two classes of theorems are applied to the linearized form of these equations to establish necessary conditions for controlability for preselected actuator configurations. The feedback gains are selected: (1) based on the decoupling of the original coordinates and to obtain proper damping, and (2) by applying the linear regulator problem to the individual model coordinates separately. The linear control laws obtained using both techniques were evaluated by numerical integration of the nonlinear system equations. Numerical examples considering pitch and various number of modes with different combination of actuator numbers and locations are presented. The independent model control concept used earlier with a discretized model of the thin beam in orbit was reviewed for the case where the number of actuators is less than the number of modes. Results indicate that although the system is controllable it is not stable about the nominal (local vertical) orientation when the control is based on modal decoupling. An alternate control law not based on modal decoupling ensures stability of all the modes.

Bainum, P. M.↗

NASA NTRS1979

Decoupling control of a long flexible beam in orbit

The paper presents a method of control for large flexible systems using state variable feedback, with a long flexible beam given as an example. These feedback gains are selected: (1) based on the decoupling of the original coordinates and to obtain proper damping and (2) by applying the linear regulator problem to the individual modal coordinates separately. It is shown that the linear control law thus obtained are then evaluated by numerical integration of the non-linear system equations. Also included are results showing the effects (control spillover) on the uncontrolled modes when the number of controllers is less than the number of modes, and the effects of inaccurate knowledge of the control influence coefficients which lead to errors in the calculated feedback gains.

Reddy, A. S. S. R.↗

NASA NTRS1979

On the controllability of a long flexible beam in orbit

The equations of planar motion for a long, flexible free-free beam in orbit are developed and include the effects of gravity-gradient torques and control torques resulting from actuators assumed to be located at specific points along the beam. The control devices are used to control both the orientation as well as the shape of the beam. Application of two classes of theorems to the linearized form of these equations is used to establish necessary and sufficient conditions for controllability for different combinations of number/location of actuators with the number of modes contained in the mathematical model. It is seen that the number of actuators, if properly located, can be less than the number of modes in the system model. A numerical example illustrates the controlled response to an initial perturbation in both pitch angle as well as beam shape.

Bainum, P. M.↗