Engineering topics

Reethof, G.

Publications and source records attributed to Reethof, G..

5 records

NASA NTRS1976

A source array for generating higher order acoustic modes in circular ducts

A unique source array has been developed for the generation of both spinning and non-spinning higher order modes in a circular duct. The array consists of two concentric rings of sources. Through individual control of the response of each element, the array provided phase and amplitude control in the radial as well as circumferential directions. Radial modes shapes were measured in a 12-inch diameter anechoically-terminated hollow duct. These modes could be generated at their cut-off frequency and throughout a frequency range extending to the cut-off frequency for the next higher order radial mode. Comparisons are given between theory and experiment for the generation of specific modes. The radial dependence of the measured mode shapes was enhanced considerably by the design of this array. The results indicate a significant improvement over previous mode generation mechanisms. The contamination of the generated mode by additional spurious modes is also considered for variations between individual elements within the source array.

Wyerman, B. R.↗

NASA NTRS1976

The propagation and attenuation of complex acoustic waves in treated circular and annular ducts

The propagation of plane waves and higher order acoustic modes in a circular multisectioned duct was studied. A unique source array consisting of two concentric rings of sources, providing phase and amplitude control in the radial, as well as circumferential direction, was developed to generate plane waves and both spinning and nonspinning higher order modes. Measurements of attenuation and radial mode shapes were taken with finite length liners between the hard wall sections of an anechoically terminated duct. Materials tested as liners included a glass fiber material and both sintered fiber metals and perforated sheet metals with a honeycomb backing. The fundamental acoustic properties of these materials were studied with emphasis on the attenuation of sound by the liners and the determination of local versus extended reaction behavior for the boundary condition. The experimental results were compared with a mathematical model for the multisectioned duct.

Reethof, G.↗

NASA NTRS1975

The propagation of plane waves and higher order acoustic modes in multisectioned ducts

A theoretical and experimental study of acoustic propagation in an anechoically terminated multisectioned duct was performed. A unique source array consisting of two concentric rings of sources, providing phase and amplitude control in the radial as well as circumferential direction, was developed to generate plane waves and both spinning and non-spinning higher order modes. Measurement of attenuation and radial mode shapes were taken with various finite length liners inserted between the hard wall sections of a duct with an anechoic termination. A search technique was developed to find the complex eigenvalues for a liner under the assumption of a locally reacting boundary condition. The experimental results were compared with a theoretical analysis which includes the modal transmission and reflection at the interface of each duct section, and this indicated that the local reaction boundary condition is valid for three liner configurations.

Wyerman, B. R.↗

NASA NTRS1974

On the distribution of source coherency in subsonic jets

Recent experimental and theoretical studies on the sources of far field noise generated by subsonic circular jets have given convincing indications that a coherent wave motion does exist in the potential core of subsonic jets. Cross-covariance measurements using single and cross hot-wire probes in the potential core as well as the turbulent mixing region and microphone measurements in the far field have resulted in cross-correlation coefficients of sufficiently high magnitudes to indicate that significant, if not dominant, noise sources may be located in the potential core. The paper presents the analytical and experimental results of this research.

Seiner, J. M.↗

NASA NTRS1973

Design and development of the spinning mode synthesizer

Design and development of a flexible source of spinning modes which is capable of generating independent spinning waves of controlled complexity and spin speed without the introduction of broad band elements is reported. These features were accomplished through the use of eight commercial loudspeakers located in an equally spaced circular array with diameter of 11 inches and properly phased so that the system could generate a spinning wave. The constructed apparatus was tested in an anechoic environment and found capable of generating a plane, one and two lobed spinning wave of high quality with a sound pressure level of 120 db and at frequencies ranging from 1500 to 2500 Hz at a distance of 4 ft in the far field. The wave speeds investigated varied from 8000 to 18000 rad/sec which represent supersonic peripheral speeds.

Seiner, J. M.↗