Search NASASearch

Engineering topics

Refaat, T. F.

Publications and source records attributed to Refaat, T. F..

Column CO2 Measurement From an Airborne Solid-State Double-Pulsed 2-Micron Integrated Path Differential Absorption Lidar

NASA LaRC is developing and integrating a double-Pulsed 2-micron direct detection IPDA lidar for CO2 column measurement from an airborne platform. The presentation will describe the development of the 2-micrometers IPDA lidar system and present the airborne measurement of column CO2 and will compare to in-situ measurement for various ground target of different reflectivity.

Singh, U. N.

Infrared Detector Activities at NASA Langley Research Center

Infrared detector development and characterization at NASA Langley Research Center will be reviewed. These detectors were intended for ground, airborne, and space borne remote sensing applications. Discussion will be focused on recently developed single-element infrared detector and future development of near-infrared focal plane arrays (FPA). The FPA will be applied to next generation space-based instruments. These activities are based on phototransistor and avalanche photodiode technologies, which offer high internal gain and relatively low noise-equivalent-power. These novel devices will improve the sensitivity of active remote sensing instruments while eliminating the need for a high power laser transmitter.

Abedin, M. N.

Two-micron Detector Development using Sb-based Material Systems

NASA Langley Research Center (LaRC), in partnership with the University of Delaware (UD), developed AlGaAsSb/InGaAsSb custom-designed phototransistors in the 0.6-2.5 micron wavelength range for applications to laser remote sensing. The phototransistor s performance greatly exceeds the previously reported results at this wavelength range in the literature. The performances of the custom-designed phototransistor, such as responsivity, detectivity, and gain, are improved significantly as compared to the previously published detectors as well as commercial detectors. Detection in the 0.6- to 2.5- micron broadband with a single phototransistor will result in reduction or elimination of heavy and complex optical components now required for multiple wavelength detection in atmospheric remote sensors resulting in smaller, lighter, simpler instruments with higher performance. This high performance broadband phototransistor will eliminate the need for high power laser for active remote sensing and also the Si (1.0- micron cutoff) and InGaAs (extended 2.3- micron cutoff) detectors. The developed broadband phototransistor will be applicable for the next generation of space-based Earth observations and other planetary instruments for active and passive remote sensing with substantial reduction in size, complexity, and weight to measure water vapor, methane, and carbon dioxide in planetary atmospheres as well as aerosol, cloud, water vapor, O2, CO, and CO2 for a broad range of applications to Earth and Space Science Missions under Science Mission Directorate (SMD) research programs.

Abedin, M. N.

2.4 Micrometer Cutoff Wavelength AlGaAsSb/InGaAsSb Phototransistors

We report the first AlGaAsSb/InGaAsSb phototransistors with a cutoff wavelength (50% of peak responsivity) of 2.4 micrometers operating in a broad range of temperatures. These devices are also the first AlGaAsSb/InGaAsSb heterojunction phototransistors (HPT) grown by molecular beam epitaxy (MBE). This work is a continuation of a preceding study, which was carried out using LPE (liquid phase epitaxy)-grown AlGaAsSb/InGaAsSb/GaSb heterostructures. Although the LPE-related work resulted in the fabrication of an HPT with excellent parameters [1-4], the room temperature cutoff wavelength of these devices (approximately 2.15 micrometers) was determined by fundamental limitations implied by the close-to-equilibrium growth from Al-In-Ga-As-Sb melts. As the MBE technique is free from the above limitations, AlGaAsSb/InGaAsSb/GaSb heterostructures for HPT with a narrower bandgap of the InGaAsSb base and collector - and hence sensitivity at longer wavelengths (lambda) - were grown in this work. Moreover, MBE - compared to LPE - provides better control over doping levels, composition and width of the AlGaAsSb and InGaAsSb layers, compositional and doping profiles, especially with regard to abrupt heterojunctions. The new MBE-grown HPT exhibited both high responsivity R (up to 2334 A/W for lambda=2.05 micrometers at -20 deg C.) and specific detectivity D* (up to 2.1 x 10(exp 11) cmHz(exp 1/2)/W for lambda=2.05 micrometers at -20 deg C).

Sulima, O. V.