Search NASA⌕ Search

Engineering topics

Regen, Steven L.

Publications and source records attributed to Regen, Steven L..

Hyperthin Membranes for Gas Separations (Final Technical Report)

This final technical report summarizes DOE-supported research that we have carried out over the past 18 years; i.e., 09/01/2005-08/31/2023. Two hyperthin types of membranes that were reported most recently, which have practical potential for the separation of CO 2 from N 2 in flue are highlighted in this final technical report.

36 MATERIALS SCIENCE↗

Increased CO 2 /N 2 selectivity of PTMSP by surface crosslinking

The surface crosslinking of poly[1-(trimethylsilyl)-1-propyne] (PTMSP) membranes by dithiothreitol under thiol–ene click reaction conditions has yielded membranes having CO 2 /N 2 selectivities in excess of 30 with CO 2 permeances in excess of 300 GPU (gas permeation units). Here, the simplicity of this surface crosslinking strategy together with these permeation results suggests that PTMSP that is modified in such ways could lead to useful materials for the separation of CO 2 /N 2 from flue gas and for certain other gaseous mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Layer-by-Layer Nanoarchitectonics of Electrochemically Active Thin Films Comprised of Radical-Containing Polymers

Electroactive coatings based on non-conjugated redox-active polymers have increased in popularity with the development of thin film organic batteries. Here, control over coating deposition, redox-activity, and ion transport are key to improving their energy storage performance. In this work, the synthesis, solution state electrochemical characterization, and layer-by-layer (LbL) assembly of a nitroxide-based polycation and polyanion are presented. Solution state electrochemical characterization indicates that the rate of electron transfer for the nitroxide polyanion is much higher as compared to the nitroxide polycation. LbL thin films of the nitroxide polyanion and nitroxide polycation are assembled, demonstrating linear growth and tunable thickness (28 nm/layer pair). This work confirms that the ion transport mechanism of the LbL films during the redox reaction is influenced depending on the charge of the terminating layer, where the nitroxide polyanion can participate in self-doping, which leads to a contribution from cation transport. The nitroxide polyanion-terminated film also exhibits a higher capacity and a slightly reduced charge transfer resistance. However, it was also observed that a more pronounced capacity fade occurred for the polyanion-terminated film than the polycation-terminated film. Taken together, this highlights how oppositely charged radical-containing polyelectrolytes can form electroactive coatings for possible applications in energy storage or sensing.

25 ENERGY STORAGE↗

Defect Repair of Polyelectrolyte Bilayers Using SDS: The Action of Micelles Versus Monomers

Defects within single, double, and triple polyelectrolyte bilayers derived from poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethyammonium chloride) (PDDA) have been repaired using aqueous solutions of sodium dodecyl sulfate (SDS), as evidenced by a reduction in their permeability and an increase in their permeation selectivity. In contrast to the use of monomer solutions of SDS, which were moderately effective in repairing only double and triple bilayers, micellar solutions proved highly effective for all three assemblies. Here, evidence for intact micelles or micellar fragments being deposited on the surface of single bilayers of PSS/PDDA has been obtained from a combination of atomic force microscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle measurements. Observed CO 2 permeances of ca. 200 GPU and CO 2 /N 2 selectivities of ca. 30 for SDS-repaired, single bilayers of PSS/PDDA suggest that further development of such assemblies could have the practical potential for the separation of CO 2 from N 2 in the flue gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Clicking the Surface of Poly[1-(trimethylsilyl)propyne] (PTMSP) via a Thiol–Ene Reaction: Unexpected CO 2 /N 2 Permeability

The surface modification of poly[1-(trimethylsilyl)- propyne] (PTMSP) film via a thiol-ene click reaction with sodium 3-mercapto-1-propanesulfonate has yielded membranes having a CO 2 permeance as high as 530 GPU with a CO 2 /N 2 selectivity of 21. This level of performance, together with the simplicity of this surface modification, indicates that such materials could become viable alternatives to some of the most enticing membrane materials that are currently being explored for the practical capture of CO 2 from flue gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Layer-by-layer assembly of a polymer of intrinsic microporosity: targeting the CO 2 /N 2 separation problem

A polymer of intrinsic microporosity, 1, has been incorporated into a series of polyelectrolyte multilayers via the layer-by-layer deposition method. One of these assemblies [a 6 nm multilayer derived from 1 plus poly(diallyldimethylammonium chloride)] showed exceptional permeation properties with respect to CO 2 and N 2 . Specifically, this film exhibited a CO 2 permeance of 130 GPU and a CO 2 /N 2 selectivity of 33.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Glued Langmuir-Blodgett bilayers from calix[ n ]arenes: Influence of calix[ n ]arene size on ionic cross-linking, film thickness, and permeation selectivity

A homologous series of calix[4]arene-, calix[5]arene- and calix[6]arene-based surfactants, containing pendant trimethylammonium and n-hexadecyl groups, have been compared with respect to their ability (i) to undergo ionic crosslinking at the air/water interface, (ii) to incorporate poly(4-styrenesulfonate) (PSS) in Langmuir-Blodgett (LB) bilayers, and (iii) to act as barriers towards He, N 2 and CO 2 when assembled into crosslinked LB bilayers. As these calix[n]arenes increase in size, their ability to undergo ionic crosslinking has been found to increase, the thickness of corresponding glued LB bilayers has been found to decrease, and their barrier properties and permeation selectivities have been found to increase. In conclusion, the likely origin for these effects and the probable mechanism by which He, N 2 and CO 2 cross these ultrathin films are discussed.

36 MATERIALS SCIENCE↗