Search NASA⌕ Search

Engineering topics

Register, Richard A

Publications and source records attributed to Register, Richard A.

The crystal-crystal transition in hydrogenated ring-opened polynorbornenes: Tacticity, crystal thickening, and alignment

At a temperature T cc well below its melting point T m , hydrogenated ring-opened polynorbornene (hPN) is known to exhibit a crystal-crystal transition; above T cc , the hPN chains are rotationally disordered. This transition is examined in a series of hPNs polymerized with different Mo- and Ru-based catalysts, each of which imparts a slightly different tacticity to the polymer. T cc is found to correlate well with the ratio of meso to racemo dyads (m:r); small changes in m:r (from 0.8 to 1.1) are sufficient to raise T cc by nearly 20 °C. For the homogeneous Mo-based 'Schrock-type' catalyst examined, such a change in m:r is easily achieved by simply adding the reversibly binding ligand trimethylphosphine during polymerization. T cc approaches T m with increasing m:r, indicating that r dyads stabilize the rotationally disordered structure. When heated above T cc , hPN crystals thicken at a rate much greater than conventional three-dimensionally ordered crystals, but below the rates shown by the two-dimensional hexagonal (columnar) phase formed by some polymers, reflecting the intermediate level of order and chain mobility present in the high-temperature hPN crystal phase. Solid-state processing of hPN between T cc and T m yields highly aligned macroscopic specimens.

36 MATERIALS SCIENCE↗

Melt and Solid-State Structures of Polydisperse Polyolefin Multiblock Copolymers

Crystallization in polydisperse ethylene-octene multiblock copolymers, polymerized via chain shuttling chemistry, is examined using two-dimensional synchrotron small- and wide-angle X-ray scattering on flow-aligned specimens. The multiblocks are composed of alternating crystalline (hard) blocks of low 1-octene content and amorphous (soft) blocks of high 1-octene content; the block lengths and the number of blocks per chain are characterized by most-probable distributions. These polymers self-assemble into lamellar domain morphologies in the melt, and the melt morphology is retained in the solid state. Despite extensive mixing between hard and soft blocks, the high crystallinity (>50%) of the hard blocks leads to an alignment of the crystallites within the domain structure, with the orthorhombic polyethylene c-axis generally perpendicular to the lamellar domain normal. The interlamellar domain spacings exhibited by the multiblocks, which exceed 100 nm, are estimated to be 5 times larger than those in near-monodisperse block copolymers having a similar chemical composition and a number-average molecular weight equivalent to the multiblock's 'constituent diblock' repeating unit. This swelling factor exceeds the value of 3 previously reported for analogous polydisperse olefin diblock copolymers, due to the lower segregation strength and enhanced phase mixing of the multiblocks studied here.

36 MATERIALS SCIENCE↗

Solid-State Structure and Crystallization in Double-Crystalline Diblock Copolymers of Linear Polyethylene and Hydrogenated Polynorbornene

Double-crystalline diblock copolymers of linear polyethylene (LPE) and hydrogenated polynorbornene (hPN) are synthesized, and their crystallization behavior and morphology are examined using small-angle (SAXS) and wide-angle X-ray scattering (WAXS). In symmetric hPN/LPE diblocks with molecular weights above 50 kg/mol, the hPN block has previously been shown to crystallize first and set the solid-state microstructure. Two-dimensional WAXS on hand-drawn fiber specimens reveals that the LPE crystals formed in confinement stack orthogonally to the hPN crystals. By adjusting total molecular weight, the order of block crystallization may be reversed, even while holding the block length ratio fixed. At a diblock molecular weight of 20 kg/mol, simultaneous time-resolved SAXS/WAXS reveals that the LPE block crystallizes first, even when LPE is the minority component, and restricts hPN to crystallize between the LPE lamellae. The relative orientation of the LPE and hPN crystals in the lower molecular weight diblocks is examined by modeling changes in the SAXS primary peak intensity on cooling two diblocks through the hPN crystal-crystal transition, where hPN densifies as it adopts a rotationally ordered crystal structure. Only a perpendicular stacking of hPN and LPE crystals consistently yields the large reduction in primary SAXS peak intensity observed for both diblocks. Thus, even though the templating block switches from hPN to LPE as the diblock molecular weight is reduced, the orthogonal stacking motif is retained for both high- and low-molecular-weight copolymers.

36 MATERIALS SCIENCE↗

Crystallization in Ordered Polydisperse Polyolefin Diblock Copolymers

The morphologies of polydisperse ethylene-octene diblock copolymers, synthesized via a novel coordinative chain transfer polymerization process, are examined using two-dimensional synchrotron small-angle and wide-angle X-ray scattering on flow-aligned specimens. The diblock copolymers comprise one amorphous block with high 1-octene content and one semicrystalline block with relatively low 1-octene content, and each block ideally exhibits the most-probable distribution. Near-symmetric diblocks with a sufficiently large octene differential between the amorphous and semicrystalline blocks show well-ordered lamellar domain structures with long periods exceeding 100 nm. Orientation of these domain structures persists through multiple melting/recrystallization cycles, reflecting a robust structure which self-assembles in the melt. The domain spacings are nearly 3-fold larger than those in near-monodisperse polyethylene block copolymers of similar molecular weights. Although the well-ordered lamellar domain structure established in the melt is preserved in the solid state, the crystallites are isotropic in orientation. These materials display crystallization kinetics consistent with a spreading growth habit, indicating that the lamellae do not confine or template the growing crystals. The exceptionally large domain spacings and isotropic crystal growth are attributed to interblock mixing resulting from the large polydispersity; short hard blocks dissolved in the soft-block-rich domains swell the domain spacing in the melt and allow hard block crystallization to proceed across the lamellar domain interfaces.

43 PARTICLE ACCELERATORS↗

Rheology and Structure of Molten, Olefin Multiblock Copolymers

Several samples of a recently developed olefin multiblock copolymer were studied by means of rheology, differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS). The synthesis involves a chain shuttling agent (CSA) that switches the growing chain between two catalysts, one that favors the incorporation of an {alpha}-olefin comonomer and one that suppresses incorporation. The data were used to determine the effect of octene comonomer content and CSA level on rheological behavior and the occurrence of mesophase separation transition (MST) in the melt. To distinguish between crystallization and MST, we made calorimetry scans and measured the density and rheological properties over a range of temperatures. Small angle X-ray scattering analysis of a sample that had undergone planar extensional flow revealed strong alignment of lamellar mesodomains, which maintained their alignment after annealing. This result confirmed the hypothesis based on rheological evidence that a lamellar mesophase is present in the melt at temperatures well above the melting point.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗