Engineering topics
Reid, R.
Publications and source records attributed to Reid, R..
Closeout Report for the Refractory Metal Accelerated Heat Pipe Life Test Activity
With the selection of a gas-cooled reactor, this heat pipe accelerated life test activity was closed out and its resources redirected. The scope of this project was to establish the long-term aging effects on Mo-44.5%Re sodium heat pipes when subjected to space reactor temperature and mass fluences. To date, investigators have demonstrated heat pipe life tests of alkali metal systems up to .50,000 hours. Unfortunately, resources have not been available to examine the effect of temperature, mass fluence, or impurity level on corrosion or to conduct post-test forensic examination of heat pipes. The key objective of this effort was to establish a cost/time effective method to systematically test alkali metal heat pipes with both practical and theoretical benefits. During execution of the project, a heat pipe design was established, a majority of the laboratory test equipment systems specified, and operating and test procedures developed. Procurements for the heat pipe units and all major test components were underway at the time the stop work order was issued. An extremely important outcome was the successful fabrication of an annular wick from Mo-5%Re screen (the single, most difficult component to manufacture) using a hot isostatic pressing technique. This Technical Publication (TP) includes specifics regarding the heat pipe calorimeter water-cooling system, vendor design for the radio frequency heating system, possible alternative calorimeter designs, and progress on the vanadium equilibration technique. The methods provided in this TP and preceding project documentation would serve as a good starting point to rapidly implement an accelerated life test. Relevant test data can become available within months, not years, and destructive examination of the first life test heat pipe might begin within 6 months of test initiation. Final conclusions could be drawn in less than a quarter of the mission duration for a long-lived, fission-powered, deep space probe.
Experimental Evaluation of a Water Shield for a Surface Power Reactor
A water based shielding system is being investigated for use on initial lunar surface power systems. The use of water may lower overall cost (as compared to development cost for other materials) and simplify operations in the setup and handling. The thermal hydraulic performance of the shield is of significant interest. The mechanism for transferring heat through the shield is natural convection. A representative lunar surface reactor design is evaluated at various power levels in the Water Shield Testbed (WST) at the NASA Marshall Space Flight Center. The evaluation compares the experimental data from the WST to CFD models. Performance of a water shield on the lunar surface is predicted by CFD models anchored to test data, and by matching relevant dimensionless parameters.
Mars Lander Robotics and Machine Vision Capabilities for in situ Planetary Science
We overview our recent progress in lander-based robotics for Mars planetary science. Utilizing a 1:1 scale laboratory replica of the NASA Mars Surveyor '98 mission, JPL engineers and Mars sciencce colleagues have demonstrated approaches to lander science functions such as robotic sample acquisiiton and deposition, end-effector based microscopic viewing, hand-carried science instrument data collection, and science instrument emplacement by a robot.
A piloted simulation study to evaluate the docking control of the LM/ATM vehicle. Project Apollo
Piloted simulation of docking with various configurations of jet failures and solar panels extended or retracted
ORBITAL FLIGHT SIMULATION
Package, hybrid, and integrated approaches to orbital flight simulation