Engineering topics
Publications and source records attributed to Reilly, H..
The first Ka-Band Deep Space Network downlink demonstration was recently carried out by the Ka-Band Link Experiment (KABLE) in association with the Mars Observer spacecraft.
The results of an X/X/Ka-band feed design concept demonstration are presented. The purpose is to show the feasibility of adding a Ka-band beacon to the Mars Observer spacecraft. Scale model radiation patterns were made and analyzed.
A prototype X/S-band common aperture horn feed for future use at various DSN sites and the Network Consolidation Program is discussed. The final design and fabrication of the second generation feedhorn and combiner is dealt with. The results of the measurements obtained with the second generation, full scale feed configuration are presented.
A prototype X-S band horn feed for future use at various DSN sites, dealing with the testing of the final fabricated feed at DSS 13 are discussed. Measured feedhorn patterns are presented, and efficiencies calculated. Preliminary results of system noise temperature and 26-m antenna system gain measurements are presented. Some measurements leading to an improved second generation feed are described. The results of the field measurements indicate that this horn will perform as originally specified and required. The tests for the second generation feed have indicated the potential cause of minor X-band moding.
The design of a K-band radiometer for use in the microwave weather project is discussed. The major components of the system, such as feedhorn, waveguide switch, and receiver assembly are described. The system will be installed at DSS 13 at Goldstone, California, when completed.
The rationale for a Water Vapor Radiometer (WVR) as an aid in predicting tropospheric delay correction is presented. Included is a block diagram and a description of the present developmental WVR with the semiautomated operating sequence outlined. A brief summary of field tests at El Monte airport and Pt. Mugu is given.