Search NASA⌕ Search

Engineering topics

Ren, J

Publications and source records attributed to Ren, J.

Solid state synthesis of LiFePO{sub 4} studied by in-situ high energy x-ray diffraction.

The phase evolution and crystal structure transition of materials during solid-state synthesis of LiFePO{sub 4} were investigated by in situ high energy X-ray diffraction. It was found that the solid state reaction forming LiFePO{sub 4} started at a very low temperature, and LiFePO{sub 4} was clearly observed when the reaction temperature was above 173 C. In situ X-ray diffraction data also revealed that several impurities appeared when the reaction temperature was above 400 C. These impurities were successfully indexed with ex situ X-ray diffraction as Li3PO{sub 4}, Fe{sub 2}P, and Fe{sub 3}P.

36 MATERIALS SCIENCE↗

Functional Anatomy of Phospholipid Binding And Regulation of Phosphoinositide Homeostasis By Proteins of the Sec14 Superfamily

Sec14, the major yeast phosphatidylinositol (PtdIns)/phosphatidylcholine (PtdCho) transfer protein, regulates essential interfaces between lipid metabolism and membrane trafficking from the trans-Golgi network (TGN). How Sec14 does so remains unclear. We report that Sec14 binds PtdIns and PtdCho at distinct (but overlapping) sites, and both PtdIns- and PtdCho-binding activities are essential Sec14 activities. We further show both activities must reside within the same molecule to reconstitute a functional Sec14 and for effective Sec14-mediated regulation of phosphoinositide homeostasis in vivo. This regulation is uncoupled from PtdIns-transfer activity and argues for an interfacial presentation mode for Sec14-mediated potentiation of PtdIns kinases. Such a regulatory role for Sec14 is a primary counter to action of the Kes1 sterol-binding protein that antagonizes PtdIns 4-OH kinase activity in vivo. Collectively, these findings outline functional mechanisms for the Sec14 superfamily and reveal additional layers of complexity for regulating phosphoinositide homeostasis in eukaryotes.

59 BASIC BIOLOGICAL SCIENCES↗

Demonstration of detuning and wavebreaking effects on Raman amplification efficiency in plasma

A plasma-based resonant backward Raman amplifier/compressor for high power amplification of short laser pulses might, under ideal conditions, convert as much as 90% of the pump energy to the seed pulse. While the theoretical highest possible efficiency of this scheme has not yet been achieved, larger efficiencies than ever before obtained experimentally (6.4%) are now being reported, and these efficiencies are accompanied by strong pulse compression. Based on these recent extensive experiments, it is now possible to deduce that the experimentally realized efficiency of the amplifier is likely constrained by two factors, namely the pump chirp and the plasma wavebreaking, and that these experimental observations may likely involve favorable compensation between the chirp of the laser and the density variation of the mediating plasma. Several methods for further improvement of the amplifier efficiency in current experiments are suggested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Distribution and occurrence of arsenic in two typical Chinese coals

Two complementary methods, float-sink experience and sequential chemical leaching were used to probe into the occurrence of arsenic in two Chinese coals: Yima (YM) and Datong (DT). Flow injection-hydride generation atomic fluorescence spectrometry was employed to measure the arsenic content in parent coals as well as the size and density-fraction samples. Float-sink experiment indicated that the heavy density fractions were enriched mineral containing arsenic in two bituminous coals studied, as confirmed by the sequential chemical leaching method. Sequential chemical leaching revealed that sulfide arsenic was the primary mode of occurrence (>50%) stable from also abounded in coal with content between 30 and 40%, and a small amount of arsenic took the occurrence of arganic form.

01 COAL, LIGNITE, AND PEAT↗

Removing arsenic from coal under ultrasonic and microwave radiation: The influence of processing parameter

Arsenic is one of the trace elements in coal that we are most concerned about because of its toxicity and environmental persistence. Poisoning is endemic in China and is widespread and locally very severe, which is receiving increased attention throughout the world. In this study, an oxidation method was applied for removing arsenic from two Chinese coals (Yima and Datong) under ultrasonic and microwave radiation. There are many processing parameters that impact the effect of removing arsenic from coal: power of ultrasonic, time in ultrasonic, time in microwave radiation, and the concentration of coal, and these were considered with several levels in this article.

01 COAL, LIGNITE, AND PEAT↗

A compact double-pass Raman backscattering amplifier/compressor

The enhancement of stimulated Raman backscattering (SRBS) amplification was demonstrated by introducing a plasma density gradient along the pump and the seed interaction path and by a novel double-pass design. The energy transfer efficiency was significantly improved to a level of 6.4%. The seed pulse was amplified by a factor of more than 20 000 from the input in a 2 mm long plasma, which also exceeded the intensity of the pump pulse by 2 orders of magnitude. This was accompanied by very effective pulse compression, from 500 fs to 90 fs in the first pass measurements and in the second pass down to approximately 50 fs, as it is indicated by the energy-pulse duration relation. Further improvements to the energy transfer efficiency and the SRBS performance by extending the region of resonance is also discussed where a uniform {approx}4 mm long plasma channel for SRBS was generated by using two subsequent laser pulses in an ethane gas jet.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗