Search NASA⌕ Search

Engineering topics

Renna, Lawrence A.

Publications and source records attributed to Renna, Lawrence A..

Photoacid-Modified Nafion Membrane Morphology Determined by Resonant X-ray Scattering and Spectroscopy

Covalent attachment of photoacid dye molecules to perfluorinated sulfonic acid membranes is a promising route to enable active light-driven ion pumps, but the complex relationship between chemical modification and morphology is not well understood in this class of functional materials. In this study we demonstrate the effect of bound photoacid dyes on phase-segregated membrane morphology. Resonant X-ray scattering near the sulfur K-edge reveals that introduction of photoacid dyes to the end of the ionomer side chains enhances phase segregation among ionomer domains, and the ionomer domain spacing increases with increasing amount of bound dye. Furthermore, relative crystallinity is marginally enhanced within semicrystalline domains composed of the perfluorinated backbone. Finally, X-ray absorption spectroscopy coupled with first-principles density functional theory calculations suggest that above a critical concentration, the multiple hydrophilic groups on the attached photoacid dye may help increase residual water content and promote hydration of adjacent sulfonic acid side chains under dry or ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interplay between Ion Transport, Applied Bias, and Degradation under Illumination in Hybrid Perovskite p-i-n Devices

In this work, we studied ion transport in hybrid organic–inorganic perovskite p-i-n devices as a function of applied bias under device operating conditions. Using electrochemical impedance spectroscopy (EIS) and equivalent circuit modeling, we elucidated various resistive and capacitive elements in the device. We show that ion migration is predictably influenced by a low applied forward bias, characterized by an increased capacitance at the hole-transporting (HTM) and electron-transporting material (ETM) interfaces, as well as in bulk. However, unlike observations in n-i-p devices, we found that there is a capacitive discharge leading to ion redistribution in the bulk at high forward biases. Furthermore, we show that a chemical double-layer capacitance buildup as a result of ion accumulation impacts the electronic properties of the device, likely by inducing either charge pinning or charge screening, depending on the direction of the ion-induced field. Finally, we extrapolate ion diffusion coefficients (~10 –7 cm 2 s –1 ) and ionic conductivities (~10 –7 S cm –1 ) from the Warburg mass (ion) diffusion response and show that, as the device degrades, there is an overall depletion of capacitive effects coupled with increased ion mobility.

36 MATERIALS SCIENCE↗

A Polymer Hole Extraction Layer for Inverted Perovskite Solar Cells from Aqueous Solutions

Poly(Phenylene vinylene) anionic polyelectrolyte (PVBT-SO 3 ) was found to be an efficient hole extraction layer for inverted perovskite solar cells. It can be cast from an aqueous solution and does not require thermal annealing for improved device performance. The devices show maximum solar cell efficiency of 15.9% and exhibit improved stability under ambient conditions and enhanced charge extraction.

14 SOLAR ENERGY↗

Tunable Percolation in Semiconducting Binary Polymer Nanoparticle Glasses

Binary polymer nanoparticle glasses offer opportunities to realize the facile assembly of disparate components, with control over nanoscale and mesoscale domains, for the development of functional materials. Our report demonstrates that tunable electrical percolation can be achieved through semiconducting/insulating polymer nanoparticle glasses by varying the relative percentages of equal-sized nanoparticle constituents of the binary assembly. Using time-of-flight charge carrier mobility measurements and conducting atomic force microscopy, we show that these systems exhibit power law scaling percolation behavior with percolation thresholds of ~24–30%. We develop a simple resistor network model, which can reproduce the experimental data, and can be used to predict percolation trends in binary polymer nanoparticle glasses. Finally, we analyze the cluster statistics of simulated binary nanoparticle glasses, and characterize them according to their predominant local motifs as (p i , p 1-i )-connected networks that can be used as a supramolecular toolbox for rational material design based on polymer nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of Ion Transport in Perovskite Active Layers and Its Implications for Active Layer Stability

Solar cells fabricated using alkyl ammonium metal halides as light absorbers have the right combination of high power conversion efficiency and ease of fabrication to realize inexpensive but efficient thin film solar cells. However, they degrade under prolonged exposure to sunlight. In this work, we show that this degradation is quasi-reversible, and that it can be greatly lessened by simple modifications of the solar cell operating conditions. We studied perovskite devices using electrochemical impedance spectroscopy (EIS) with methylammonium (MA)-, formamidinium (FA)-, and MAxFA$_{1–x}$ lead triiodide as active layers. From variable temperature EIS studies, we found that the diffusion coefficient using MA ions was greater than when using FA ions. Structural studies using powder X-ray diffraction (PXRD) show that for MAPbI 3 a structural change and lattice expansion occurs at device operating temperatures. On the basis of EIS and PXRD studies, we postulate that in MAPbI 3 the predominant mechanism of accelerated device degradation under sunlight involves thermally activated fast ion transport coupled with a lattice-expanding phase transition, both of which are facilitated by absorption of the infrared component of the solar spectrum. Using these findings, we show that the devices show greatly improved operation lifetimes and stability under white-light emitting diodes, or under a solar simulator with an infrared cutoff filter or with cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer Nanoparticle Assemblies: A Versatile Route to Functional Mesostructures

Fabricating macromolecular mesoscale assemblies containing disparate components with targeted molecular order for each of the components on the nanoscale and targeted assembly of the components in the mesoscale is a challenge. In this Perspective, we explore the self-assembly of polymer nanoparticles as a viable route to obtain tunable mesostructured materials. Here, we describe the state-of-the-art methods available for and the challenges to obtain spherical and nonspherical polymer nanoparticles. We discuss the predicted ordered assemblies and disordered assemblies of nanoparticles and the challenges to obtain these assemblies in polymer nanoparticles. We also comment on the rich and future opportunities in the burgeoning field of polymer nanoparticle assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗