Search NASA⌕ Search

Engineering topics

Reuter, D.

Publications and source records attributed to Reuter, D..

At least 37 records · Page 2

Calibration of the Thermal Infrared Sensor on the Landsat Data Continuity Mission

The Landsat series of satellites provides the longest running continuous data set of moderate-spatial-resolution imagery beginning with the launch of Landsat 1 in 1972 and continuing with the 1999 launch of Landsat 7 and current operation of Landsats 5 and 7. The Landsat Data Continuity Mission (LDCM) will continue this program into a fourth decade providing data that are keys to understanding changes in land-use changes and resource management. LDCM consists of a two-sensor platform comprised of the Operational Land Imager (OLI) and Thermal Infrared Sensors (TIRS). A description of the applications and design of the TIRS instrument is given as well as the plans for calibration and characterization. Included are early results from preflight calibration and a description of the inflight validation.

Thome, K↗

The QWIP Focal Plane Assembly for NASA's Landsat Data Continuity Mission

The Thermal Infrared Sensor (TIRS) is a QWIP based instrument intended to supplement the Operational Land Imager (OLI) for the Landsat Data Continuity Mission (LDCM). The TIRS instrument is a dual channel far infrared imager with the two bands centered at 10.8 m and 12.0 m. The focal plane assembly (FPA) consists of three 640x512 GaAs Quantum Well Infrared Photodetector (QWIP) arrays precisely mounted to a silicon carrier substrate that is mounted on an invar baseplate. The two spectral bands are defined by bandpass filters mounted in close proximity to the detector surfaces. The focal plane operating temperature is 43K. The QWIP arrays are hybridized to Indigo ISC9803 readout integrated circuits (ROICs). Two varieties of QWIP detector arrays are being developed for this project, a corrugated surface structure QWIP and a grating surface structure QWIP. This paper will describe the TIRS system noise equivalent temperature difference sensitivity as it affects the QWIP focal plane performance requirements: spectral response, dark current, conversion efficiency, read noise, temperature stability, pixel uniformity, optical crosstalk and pixel yield. Additional mechanical constraints as well as qualification through Technology Readiness Level 6 (TRL 6) will also be discussed.

Jhabvala, M.↗

The QWIP Focal Plane Assembly for NASA's Landsat Data Continuity Mission

The Thermal Infrared Sensor (TIRS) is a QWIP based instrument intended to supplement the Operational Land Imager (OLI) for the Landsat Data Continuity Mission (LDCM). The TIRS instrument is a dual channel far infrared imager with the two bands centered at 10.8[mu]m and 12.0[mu]m. The focal plane assembly (FPA) consists of three 640x512 GaAs Quantum Well Infrared Photodetector (QWIP) arrays precisely mounted to a silicon carrier substrate that is mounted on an invar baseplate. The two spectral bands are defined by bandpass filters mounted in close proximity to the detector surfaces. The focal plane operating temperature is 43K. The QWIP arrays are hybridized to Indigo ISC9803 readout integrated circuits (ROICs). Two varieties of QWIP detector arrays are being developed for this project, a corrugated surface structure QWIP and a grating surface structure QWIP. This paper will describe the TIRS system noise equivalent temperature difference sensitivity as it affects the QWIP focal plane performance requirements: spectral response, dark current, conversion efficiency, read noise, temperature stability, pixel uniformity, optical crosstalk and pixel yield. Additional mechanical constraints as well as qualification through Technology Readiness Level 6 (TRL 6) will also be discussed.

Jhabvala, M↗

Development of a 4-15 micron Infrared GaAs Hyperspectral QWlP Imager (HQI)

A viewgraph presentation on the development of a 4-15 micron Infrared GaAs Hyperspectral QWIP Imager (HQI) is provided. The topics include: 1) Background and Project Goals; 2) Instrument Overview; 3) Subassembly Description; 4) Operating Conditions; 5) Current System Performance Status; and 6) Near-Term Improvements.

Jhabvala, M.↗

Infrared spectroscopy of comets

An observational search for cometary parent molecules using infrared spectroscopy was conducted in the 1 to 5 micron region. The investigation involved two different observing programs, one at moderate spectral resolution and one at fairly high resolution. The lower resolution was used to study cometary spectra in the vicinity of 3.5 micron at wavelength/change in wavelength is approximately or equal to 10(exp 3). Comets P/Brorsen-Metcalf (1989o), Okazaki-Levy-Rudenko (1989r), and Austin (1990c1) were observed with the Cryogenic Spectrometer (CRSP) at Kitt Peak. The detector incorporated an InSb array with 58 spatial elements, each 2.7 min on the sky, and 62 spectral channels per spatial element. An, as yet, unidentified feature was detected at approximately 3.52 micron in Comet Austin (on 1990 May 4, 5, and 6). The feature is possibly present in P/Brorsen-Metcalf (observed on 1989 August 23 and 25), as well. Comet Okazaki-Levy-Rudenko exhibited continuum emission only in this spectral region at the time of the observations (1989 November 14 and 16). The data are presented, and the relationship between the 3.52 micron feature and cometary activity (e.g., water production rate, visibility of the 3.4 micron emission feature) are discussed. The high resolution program probed comet Austin in the 4.8 micron region. These observations were used to search for emission lines comprising the (1-0) vibration-rotation band of the ground electronic state of CO. Retrieval of the lines allows a probe of the population distribution of levels J' = 1 through 4 of the excited (v' = 1) vibrational state within the ground electronic state of CO. Knowledge of this distribution can be used to constrain the rotational temperature. Preliminary analysis suggests the P3 line was present UT May 16 at roughly the 5 sigma level. Results concerning the existence of other lines, and physical conditions inferred therefrom are discussed.

Disanti, Michael A.↗

Fiber-coupled high resolution infrared array spectrometer for the Kuiper Airborne Observatory

A novel cryogenic grating spectrometer (FCAS) is being designed for observations of volatiles in cometary and planetary atmospheres, and in newly forming planetary systems. The instrument features two-dimensional detector arrays coupled to a high-dispersion echelle by infrared fibers, and will achieve a spectral resolving power of about 40,000. The primary observational platform for this instrument will be the Kuiper Airborne Observatory, but it will also be configured for use at ground-based observatories. Initially, the spectrometer will use a 58 x 62, 1- to 5-micron InSb array. Larger-format IR arrays and arrays of different composition, will later be incorporated as they become available. The instrument will be used in two modes. The first uses a large format IR array in the spectral image plane for the customary one-dimensional spectral-one-dimensional spatial coverage. In the second mode, a massive, coherent bundle of infrared transmitting ZrF4 fibers will be installed after the dispersive element, to reformat the two-dimensional array into an elongated one-dimensional array for wide spectral coverage, allowing multiple lines to be measured in a single integration with high sensitivity. The overall instrument design is discussed, and the system sensitivity is estimated.

Glenar, D. A.↗

First-guess dependence of a physically based set of temperature-humidity retrievals from HIRS2/MSU data

The first-guess dependence of temperature and humidity fields retrieved from HIRS2/MSU data using the GLA (Goddard Laboratory for Atmospheres) physically based retrieval scheme is examined. Retrievals were performed over the ALPEX region for two successive synoptic periods, 1200 UTC March 4 and 00000 UTC March 5, 1982, using three different initial guesses for each period. Results show rather low first-guess dependence for the thickness fields and larger first-guess dependence for the precipitable water fields, especially close to the surface. The humidity retrieval algorithm used is described. The processing system has the property of maintaining the accuracy of a good guess and improving a poor one for both thickness and precipitable water at all levels.

Reuter, D.↗

The use of TOMS-modified VAS data for large-scale NWP

Collocation statistics obtained by comparing VISSR Atmospheric Sounder (VAS) temperature soundings with those from nearby rawinsondes indicate good agreement. However, the VAS soundings exhibited a substantial cold bias in the middle and upper troposphere. The error makes promising the use of the Total Ozone Mapping Spectrometer (TOMS) to obtain an independent estimate of tropopause pressure for use in the retrieval program. Good agreement is found between TOMS data and tropopause pressure. A quantitative assessment for the correlation of tropopause pressure, obtained from TOMS by regression and from rawinsondes over Europe, is reported.

Baker, Wayman E.↗

Cloud fields retrieved from analysis of HIRS2/MSU sounding data

The methods used to determine effective cloud fraction (cloud fraction times cloud emissivity at 11-14 microns) and cloud top pressure from analysis of HIRS2/MSU sounding data are described. Identical procedures are used day and night so as to allow for meaningful day-night difference fields. Results are shown for June 1979. The monthly mean effective cloud fraction is 43.4 percent, resulting from a 45.2 percent value at 0300 LT and 41.6 percent at 1500 LT. The retrieved single-day cloud field for June 11 shows good agreement with high spatial resolution visible and infrared imagery.

Susskind, J.↗

Remote sensing of land-surface temperature from HIRS/MSU data

A relaxation algorithm which permits meteorological parameters to be obtained from satellite data, without a priori assumptions about the properties of the other unknowns in the field of view, was developed. Atmospheric temperature profiles, atmospheric humidity, cloud cover, cloud top height, cloud top temperature, sea-surface temperature, land-surface temperature, snow cover, and ice cover are derived. Simultaneous determination of atmospheric and surface thermal structure and the cloud distribution provides information on heat sources and sinks, storage rates, and transport phenomena in the atmosphere. Such information is critical in determining the driving mechanisms for motions in the atmosphere and oceans and in improving numerical weather prediction.

Chahine, M. T.↗

Determination of cloud fields from analysis of HIRS2/MSU sounding data

IR and microwave remote sensing data collected with the HIRS2 and MSU sensors on the NOAA polar-orbiting satellites were evaluated for their effectiveness as bases for determining the cloud cover and cloud physical characteristics. Techniques employed to adjust for day-night alterations in the radiance fields are described, along with computational procedures applied to compare scene pixel values with reference values for clear skies. Sample results are provided for the mean cloud coverage detected over South America and Africa June 1979, with attention given to concurrent surface pressure and cloud top pressure values.

Susskind, J.↗

Determination of water vapor profiles and total ozone burden from HIRS2/MSU sounding data

Algorithms for determining total ozone content and humidity from HIRS2/MSU data are examined. The methods are based on the ability to accurately model the response of a given channel to changes in a given atmospheric component. The steps of the iterative relaxation method for determining atmospheric water vapor and ozone content are described. Examples of retrieved fields of total ozone and precipitable water are presented.

Reuter, D.↗

Cloud and moisture fields derived from the GLA retrievals of HIRS2/MSU data

The GLA retrieval scheme for the analysis of HIRS and MSU radiances is applied to derive cloud and humidity fields from the HIRS2/MSU data for June 1979. For the retrieval of cloud fraction and cloud top pressure, the original algorithm of Susskind et al. (1983) and Susskind et al. (1984) was improved. The derived profiles of the monthly mean fields of cloud fraction and cloud top pressure clearly show the intertropical convergence zone, with the most intense convection in the monsoonal region of the southern Asia and over Central America, which show up as containing the highest cloud top levels and largest cloud amount. For the retrieval of humidity profiles, which are not one of the products of the original processing system, a new algorithm was derived.

Reuter, D.↗

Retrieval of sea surface temperatures from HIRS2/MSU

The methods used at the Goddard Laboratory for Atmospheres (GLA) to retrieve sea surface temperatures from HIRS2/MSU data for the last 2 months of the NASA sea surface temperature intercomparison workshop are described. Results are shown that compare anomaly fields produced by using data from ships, AVHRR, and HIRS2/MSU for these months. Monthly mean fields derived from AVHRR and HIRS2 data show roughly comparable statistical accuracy compared to ship fields. Errors in the HIRS2 fields appear more random, while AVHRR data have larger regionally dependent biases and show large area spatially coherent errors. The random errors in the HIRS2 fields should be further reduced by performing the retrievals at a higher spatial resolution.

Susskind, J.↗

Retrieval of sea-surface temperatures from HIRS2/MSU

The methods used at the Goddard Laboratory for Atmospheres to retrieve sea surface temperatures from HIRS2/MSU data for the four months of the NASA sea surface temperature intercomparison workshop are described. Results are shown comparing anomaly fields produced using data from ships, AVHRR, HIRS2/MSU, SMMR AND VAS for the last three of these months. Fields from AVHRR and HIRS2 show the highest accuracy compared to ship fields. Errors in the HIRS2 fields appear more random while AVHRR data shows large area, spatially coherent errors. The random errors in the HIRS2 fields can be further reduced by performing the retrievals at a higher spatial resolution.

Susskind, J.↗

Remote sensing of atmosphere-surface interaction parameters

Examples are given of the accuracy of the results obtained from the HIRS 2/MSU (High Resolution Infrared Sounder and Microwave Sounding Unit) analysis of ocean, atmosphere, and land parameters. Sea surface temperatures are compared with available ship and buoy radiosonde data, and land surface temperatures are compared with shelter temperatures. The seasonal change in land and ocean skin surface temperature is reviewed. The distribution of clouds is examined and their opacities in the visible and infrared parts of the spectrum are compared.

Chahine, M. T.↗