Search NASA⌕ Search

Engineering topics

Rhim, W.-K.

Publications and source records attributed to Rhim, W.-K..

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Containerless Liquid to Solid Nucleation Pathways in Two Representative Grades of Commercially Available Zirconium

Experimental measurements were conducted to determine the solid metal nucleation pathways of radiatively cooling, molten zirconium spheres of two different commercially available purity grades in a high-vacuum, high-temperature electrostatic levitator. The ensemble distribution of maximum undercooling temperatures was interpreted using Poisson statistics to determine the temperature dependence of the solid metal nucleation rate. For a sample of nominally 99.95% pure zirconium, the results are consistent with heterogeneous solid metal nucleation either on static catalyst particles at least approx. 30 nm diameter or on a surface coating. For a sample of nominally 99% pure zirconium, however, it appears that heterogeneous solid metal nucleation occurred either on a polydispersion of approx. 10 nm (mean diameter) static catalyst particles or on dynamic catalyst particles that precipitated from a solution that became supersaturated as the melt cooled.

Rulison, A. J.↗
NASA NTRS1983

NMR studies of electronic structure in crystalline and amorphous Zr2PdH/x/

The proton Knight shifts and spin-lattice relaxation times have been measured in crystalline and amorphous Ze2PdH(x). Core polarization from the Zr d-band dominates the proton hyperfine interactions. The density of Fermi level d-electron states is reduced in the amorphous phase relative to the electron density in crystalline Zr2PdH(x).

Bowman, R. C., Jr.↗
NASA NTRS1982

Containerless processing technologies at the Jet Propulsion Laboratory

Acoustic and electrostatic levitation (EL) techniques for maintaining sample-wall distance in order to ensure contamination-free conditions during microgravity materials science experiments on board the Shuttle are examined. A laboratory model for acoustic containerless (AC) processing is described, noting the use of three commercially available drivers for sample levitation. The arrangement of the speakers results in a point node to which a liquid drop sample migrates. Varying the field through manipulation of the dB levels and phase of the drivers' outputs permits control of sample position and movement. Rotation of a styrofoam ball at 2000 rpm has been achieved. Oscillations can also be induced. An advanced version of the AC system is analytically defined, with further studies mentioned for stable levitation modes using a cylindrical chamber and optimizing acoustic power transfer between hot and cold regions. A tetrahedral EL system has proven to work in a reduced gravity environment. El involves imparting an electrical charge to an object and then positioning and maintaining it through use of EM fields. The presence of human operators to perform the processing on the Shuttle is mentioned as offering real-time capability of altering the experimental conditions.

Wang, T. G.↗
NASA NTRS1982

Application of microgravity and containerless environments to the investigation of fusion target fabrication technology

After the first observation of the core-centering force within a liquid shell in the KC-135 flight experiment, this force was successfully reproduced in terrestrial laboratories using two experimental techniques. The core-centering force generated for a compound drop system in the neutral buoyancy tank provides the first correlation between theoretical and experimental results. When this force was generated in a more realistic fusion-pellet system using the focusing-radiator levitating system, it was shown that this is a very strong force indeed in view of the fact that the ratio of specific gravities between the water and the core is approximately five. It is believed that this centering force will contribute significantly to an overall understanding of the fabrication physics of a fusion target system. Results from experiments in a vertical drag-free wind tunnel and in a 16-ft low pressure drop furnace suggest that eliminating or reducing the aerodynamic drag on fusion pellets during their formation stage will prevent the decentering of the bubble. Metallic and metallic glass fusion targets are seen as holding promise for improving and simplifying the fabrication process for ablative-type fusion targets.

Lee, M. C.↗
NASA NTRS1982

Development of electrostatic levitator at JPL

Preliminary results on the design and operation of electrostatic levitators developed at JPL are reported. Particular attention is given to the single-axis levitators for ground-based operation and for operation in the reduced gravity environment. Descriptions are given of the design principles and the performance of final products. A levitator designed for zero-g environment is shown. It is a single-axis system, so there is no active lateral damping. Two ring and two disk electrodes are included. The ring electrodes always maintain a constant voltage difference with respect to the central disk electrodes. This is to ensure that there is always a centering force that does not depend on the voltage difference between the top and bottom electrodes. As the ring-to-disk voltage increases, there is a proportionate increase in the centering force.

Rhim, W.-K.↗
NASA NTRS1978

A multiple pulse zero crossing NMR technique, and its application to F-19 chemical shift measurements in solids

A simple multiple-pulse 'zero crossing technique' for accurately determining the first moment of a solid-state NMR spectrum is introduced. This technique was applied to obtain the F-19 chemical shift versus pressure curves up to 5 kbar for single crystals of CaF2 (0.29 + or - 0.02 ppm/kbar) and BaF2 (0.62 + or - 0.05 ppm/kbar). Results at ambient temperature and pressure are also reported for a number of other fluorine compounds. Because of its high data rate, this technique is potentially several orders of magnitude more sensitive than similar CW methods.

Burum, D. P.↗
NASA NTRS1978

Calculation of spin-lattice relaxation during pulsed spin locking in solids

The spin-lattice relaxation time has been calculated for dipolar solids in the case where the spins are locked by an RF pulse sequence with pulses of arbitrary angle and finite width. Expressions are given for the homonuclear case in general and for the heteronuclear case in the delta-function limit. The results for the homonuclear case are experimentally confirmed using solid C6F12. The analysis shows that for small pulse angles, at which the direct spin heating effect is known to be small, the relaxation behavior will be identical to the CW irradiation case.

Rhim, W.-K.↗
NASA NTRS1976

Multiple-pulse spin locking in dipolar solids

We report our preliminary results on a multiple-pulse spin-locking effect in dipolar solids. This effect has significant experimental advantages over prior techniques because of its high duty cycle for data collection. We show that the spin temperature assumption can be applied to explain the rather long-term behavior of the spin system. We also demonstrate how this method can be applied to obtain magnetization curves almost instantly for T1 rho decay and adiabatic demagnetization.

Rhim, W.-K.↗
NASA NTRS1976

Extraction of quadrature phase information from multiple pulse NMR signals

A multiple pulse sequence (8-pulse sequence) used for high-resolution solid state NMR is analyzed with regard to the information available from each of the four wide sampling windows. It is demonstrated that full quadrature phase information can be obtained using only a single phase detector and that, for the commonly encountered situation where the spectral width is much less than the folding frequency, the signals from the various windows can be combined easily using standard complex Fourier transform software. An improvement in the signal-to-noise ratio equal to the square root of 3 is obtained over either standard single or quadrature phase detection schemes. Procedures for correcting spectral distortions are presented.

Rhim, W.-K.↗
NASA NTRS1974

Analysis of multiple pulse NMR in solids. II

A systematic method, an extension of the average Hamiltonian formalism, is presented for calculating the effects of pulse errors and imperfections in the multiple pulse nuclear magnetic resonance experiments. Application of this method to account for effects of pulse nonidealities such as phase errors, phase transient effects, pulse size errors, and rf inhomogeneity is found to agree with experimental observation, and the results furnish a basis for understanding the complex couplings between the pulse errors and other interactions such as the dipolar and the chemical shift Hamiltonians.

Rhim, W.-K.↗
NASA NTRS1973

Analysis of multiple pulse NMR in solids

The general problems associated with the removal of the effects of dipolar broadening from solid-state NMR spectra are analyzed. The effects of finite pulse width and H sub 1 inhomogeneity are shown to have limited the resolution of previous pulse cycles, and a new eight-pulse cycle designed to minimize these problems is discussed. Spectra for F-19 in CaF2 taken with this cycle are presented which show residual linewidth near 10 Hz. The feasibility of measuring proton chemical shift tensors is discussed.

Rhim, W.-K.↗