Search NASASearch

Engineering topics

Rhodes, C.

Publications and source records attributed to Rhodes, C..

Nighttime observations of thunderstorm electrical activity from a high altitude airplane

Observations of nocturnal thunderstorms from three aerial cameras flown at an altitude of 20 km and at an airspeed of 200 m/s are analyzed and compared with previous ground-based observations. Both diffuse illumination in the cloud and unobscured segments of lightning channels a kilometer or longer in clear air around and above the cloud are observed. A similarity is noted to exist between the airborne and the ground-based lightning spectra registered. It is further asserted that discrimination between cloud-to-ground and intracloud flashes and the counting of ground strokes can be achieved through the use of optical pulse pairs identified with leader return-stroke events in the cloud-to-ground flashes studied.

Brook, M.

Increasing the Ductility of Electroplated Metals

Hot isostatic pressing effective in improving ductility of metal plating. Previously hot isostatic pressing used on powder-metallurgy parts and castings but not on electroplated parts. To test idea, copperplated heated to 800 degrees C at pressure of 23,000 psi (160 MN/m2) for 4 hours. When part examined metallographically, completely free from porosity.

Paton, N.

Nighttime observations of thunderstorm electrical activity from a high altitude airplane

Photographs from a NASA U-2 airplane flying over nocturnal thunderstorms show frequent lightning activity in the upper part of the cloud. In some cases, unobscured segments of lightning channels 1 km or longer are visible in clear air around and above the cloud. Multiple images of lightning channels indicate multiple discharges in the same channel. Photographs taken through a diffraction grating show that the lightning has a spectrum similar to that observed in the lower troposphere. Lightning spectra obtained with a slitless line-scan spectrometer show strong singly ionized nitrogen emissions at 463.0 and 500.5 nm. Field changes measured with an electric field-change meter correlate with pulses measured with a photocell optical system. Optical signals corresponding to dart leader, return stroke, and continuing current events are readily distinguished in the scattered light emerging from the cloud surface. The variation of light intensity with time in lightning events is consistent with predicted modification of optical lightning signals by clouds. It appears that satellite based optical sensor measurements cannot provide reliable information on current rise times in return strokes. On the other hand, discrimination between cloud-to-ground and intracloud flashes and the counting of ground strokes is possible using the optical pulse pairs which have been identified with leader, return-stroke events in the cloud-to-ground flashes studied.

Brook, M.

Least-Squares Prediction of Solar Activity

Studies of statistical methods for predicting future solar activity described in report containing extensive graphical and tabular presentations of analyses. Lagrangian-least-squares method, which gives best predictions presented in detail. FORTRAN source code for method given.

Holland, R. L.

Thunderstorm Overflight Program

The Thunderstorm Overflight Program is being conducted by NASA, NOAA, and universities to evaluate the feasibility of making meaningful measurements of lightning parameters from an orbiting platform above thunderstorms. A NASA instrumented U-2 high-altitude research aircraft was used during the summer of 1979 and spring of 1980 to collect data over the tops of the thunderstorms while ground-based measurements were being made simultaneously. Test sites at Langmuir Laboratory, Socorro, N. Mex., and the National Severe Storms Laboratory, Norman, Okla. were used for this program. Additional flights are planned for the spring and summer of 1981. Data from the NASA U-2 flights will also be used to interpret measurements made during the Nighttime/Daytime Optical Survey Lightning Experiment to be flown on the Space Shuttle in late 1981.

Vaughan, O. H., Jr.

Web-dendritic growth

The effects of various machine design parameters on the growth of web dendritic silicon ribbon were investigated. Ribbons were grown up to lengths of one meter, with widths increasing linearly up to one cm at the point of termination of growth. Thermal data were collected and evaluated for actual seeding and growth with variations in parameters affecting heat loss. It was found that for suitable growth, the mechanical system should be very rigid and stable, and the tolerances and specifications of the quartz crucibles must be far tighter than normal quartz tolerances. The widening rates of the ribbons were found to be a function of the temperature gradient rather than the temperature differences alone. A twin spacing in the seed of 3 microns to 2 microns was found to be unfavorable for growth; whereas spacing of 0.9 microns to 2 microns and 8 microns to 2 microns were favorable. Thermal modeling studies of the effects of furnace design parameters on the temperature distributions in melt and the growth of the dendritic web ribbon showed that the pull rate of the ribbon is strongly dependent on the temperature of the top thermal shield, the spacing between this shield and the melt, and the thickness of the growing web.

Hilborn, R. B.