Search NASA⌕ Search

Engineering topics

Rials, Timothy G.

Publications and source records attributed to Rials, Timothy G..

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Bark morphological and chemical features are differentially correlated with disease resistance and yield in hybrid poplar taxa

In the southeastern United States, the establishment of short-rotation intensively cultured plantations of hybrid poplar has been hindered by its susceptibility to stem cankers. We evaluated the tradeoffs between biomass yield and disease tolerance in hybrid poplar genotypes belonging to P. deltoides × P. maximowiczii (DM), P. deltoides × P. nigra (DN), P. trichocarpa × P. maximowiczii (TM), and P. deltoides × P. deltoides (DD) taxa. We hypothesized that canker resistant genotypes will have thicker bark but bark thickness and biomass yield will be negatively correlated. After two growing seasons, the DD genotypes developed thicker bark compared to the genotypes of other taxa and bark thickness was not correlated with biomass yield in the DD genotypes (R 2 = 0.002). However, in the TM, DM, and DN genotypes, bark thickness was negatively correlated with biomass yield (R 2 = 0.33–0.77). Disease incidence studies revealed that the DM genotypes were most susceptible to canker whereas no disease was detected in DD genotypes. Furthermore, bark analysis conducted by Fourier transform infrared spectroscopy coupled with multivariate analysis showed that that DD genotypes to be chemically separate from the three hybrid genotypes and that bark chemistry was correlated with canker disease incidence. Taken together, these results reveal that it is possible to generate hybrid poplar genotypes with thicker bark, disease resistance, and higher biomass yields. This insight should guide further efforts to develop genetically improved hybrid poplar genotypes, both in terms of biomass yield and disease tolerance, for cultivation in the southeastern United States. Hybrid poplar cultivation in southeastern United States is hindered by its susceptibility to stem cankers. We evaluated tradeoffs between yield and canker disease resistance in various hybrid poplar genotypes. After two growing seasons, the DD genotypes showed disease resistance and developed thicker bark that was chemically distinct from the other genotypes. Bark thickness was not correlated with yield in the DD genotypes but was negatively correlated with yield in the other genotypes. These results will guide the development of hybrid poplar genotypes that are both disease resistant and high yielding for cultivation in the southeastern United States.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pilot-Scale Pelleting Tests on High-Moisture Pine, Switchgrass, and Their Blends: Impact on Pellet Physical Properties, Chemical Composition, and Heating Values

In this study, we evaluated the pelleting characteristics of southern yellow pine (SYP), switchgrass (SG), and their blends for thermochemical conversion processes, such as pyrolysis and gasification. Using a pilot-scale ring-die pellet mill, we specifically assessed the impact of blend moisture, length-to-diameter (L/D) ratio in the pellet die, and ratio of pine to SG on the physico-chemical properties of the resulting pellets. We found that an increase in pine content by 25–50% marginally affected the bulk density; however, it also led to an increase in calorific value by 7% and a decrease in ash content by 72%. A moisture content of 25% (wet basis) and an L/D ratio of 5 resulted in poor pellet durability at <90% and bulk density values of <500 kg/m 3 , but increasing the L/D ratio to 9 and lowering the moisture content to 20% (w.b.) improved the pellet durability to >90% and the bulk density to >500 kg/m 3 . Blends with ≥50% pine content resulted in lower energy consumption, while a lower L/D ratio resulted in higher pelleting energy. Based on these findings, we successfully demonstrated the high-moisture pelleting of 2.5 ton of pine top residues blended with SG at 60:40 and 50:50 ratios. The quality of the pellets was monitored off-line and at-line by near infrared (NIR) spectroscopy. Multivariate models constructed by combining the NIR data and the pelleting process variables could successfully predict the pine content (R 2 = 0.99), higher heating value (R 2 = 0.98), ash (R 2 = 0.95), durability (R 2 = 0.94), and bulk density (R 2 = 0.86) of the pellets. Thus, we established how blending and densification of SYP and SG biomass could improve feedstock specifications and that NIR spectroscopy can effectively monitor the pellet properties during the high-moisture pelleting process.

09 BIOMASS FUELS↗
DOE OSTI2021

Next Generation Logistics Systems for Delivering Optimal Biomass Feedstocks to Biorefining Industries in the Southeastern U.S.

The diverse portfolio of biomass sources that is available in the Southeastern U.S., including a significant supply of pine “residue”, represents a valuable strategic position for the region. Through blends formulated based on critical properties, this project will take full advantage of the range in biomass properties afforded by the portfolio to produce a consistent, high-performance feedstock for the industry, while lowering cost. Key developments being targeted to enable this potential include whole-tree transport to a state-of-the-art merchandising depot that will further access biomass from ongoing, forest industry operations. The approach will more effectively utilize the tree and distribute cost, while minimizing in-woods contamination of the woody biomass component. To implement this vision, information on the chemical composition and changes that are induced during multiple preprocessing steps (size reduction, moisture removal, densification, etc.) is needed. New NIR sensor technology will be developed for online monitoring of important biomass properties. The data will be incorporated into a statistical process control platform to improve process efficiency and meet required specifications. Advanced process models are being developed to inform the techno-economic and life-cycle assessment of the program’s impact. The new system will ultimately reduce operational risks from supply chain disruptions, and allow operation of larger-scale biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2019

Accurately estimating and minimizing costs for the cellulosic biomass supply chain with statistical process control and the Taguchi Loss Function

This research focuses on the statistical evaluation of the feedstock attributes of the biomass supply chain and the estimation of attribute costs as a function of the feedstock variability. Challenges of using cellulosic feedstocks include the variability of feedstock quality (e.g., ash content and moisture content), which impacts the final cost of the manufactured product. Statistical Process Control (SPC), Taguchi Loss Function, and components of variance techniques were illustrated for quantifying cumulative variance in the biomass supply chain. Costs in the presence of cumulative variance were estimated for switchgrass (Panicum virgatum L.) and loblolly pine residues (Pinus taeda L.). Findings of the study indicated that additional costs from ash content variability in switchgrass increased the net cost by $\$19.15$ per dry tonne. Additional costs from densification due to particle size variation increased net cost by $\$11.59$ per dry tonne. Moisture content variation increased costs by $\$14.86$ per dry tonne. This would represent a 50 to 100% increase in costs due to variation based on a $\$60$ to $\$70$ per dry tonne manufactured product cost. This study illustrates that total costs may be considerably underestimated if the influence of variance for key factors in the supply chain and associated costs are not estimated.

59 BASIC BIOLOGICAL SCIENCES↗