Search NASA⌕ Search

Engineering topics

Richards, G A

Publications and source records attributed to Richards, G A.

Materials and Component Development for Advanced Turbine Systems

Hydrogen-fired and oxy-fueled land-based gas turbines currently target inlet operating temperatures of ~1425-1760°C (~2600-3200°F). In view of natural gas or syngas-fired engines, advancements in both materials, as well as aerothermal cooling configurations are anticipated prior to commercial operation. This paper reviews recent technical accomplishments resulting from NETL’s collaborative research efforts with the University of Pittsburgh and West Virginia University for future land-based gas turbine applications.

03 NATURAL GAS↗

System issues and tradeoffs associated with syngas production and combustion

The purpose of this article is to provide an overview of the basic technology of coal gasification for the production of syngas and the utilization of that syngas in power generation. The common gasifier types, fixed/moving bed, fluidized bed, entrained flow, and transport, are described, and accompanying typical product syngas compositions are shown for different coal ranks. Substantial variation in product gas composition is observed with changes in gasifier and coal feed type. Fuel contaminants such as sulfur, nitrogen, ash, as well as heavy metals such as mercury, arsenic, and selenium, can be removed to protect the environment and downstream processes. A variety of methods for syngas utilization for power production are discussed, including both present (gas turbine and internal combustion engines) and future technologies, including oxy-fuel, chemical looping, fuel cells, and hybrids. Goals to improve system efficiencies, further reduce NOx emissions, and provide options for CO2 sequestration require advancements in many aspects of IGCC plants, including the combustion system. Areas for improvements in combustion technology that could minimize these tradeoffs between cost, complexity, and performance are discussed.

01 COAL, LIGNITE, AND PEAT↗

Factors in reactor design for carbon dioxide capture with solid, regenerable sorbents

Fossil-fuel burning power plants, which produce a substantial amount of electric power within the United States, are point sources that can emit significant quantities of carbon dioxide (CO2). In a carbon sequestration scenario, the CO2 must first be captured from the point source, or flue gas, and then be permanently stored. Since the capture/separation step dominates the cost of sequestration, various capture/separation technologies are being investigated, and regenerable, solid sorbents are the basis for one promising technique for capturing CO2 from flue gas. The solid sorbent must be able to absorb the CO2 in the first step and then be regenerated by releasing the CO2 in the second step. Due to the low operating pressure of a conventional pulverized coal-fired combustor and its subsequent low partial pressure of CO2, it is envisioned that temperature swing absorption is applicable to the sorbent capture technology. Various CO2 capture sorbents are being examined in this research area, for example physical adsorbents as well as chemical absorbents. However, with respect to process development, various reactor configurations are presently being considered. The reactor designs range from stationary beds of sorbent to those systems where the sorbent is transported between the absorber and regenerator. Emphasis is placed on design implications of employing a regenerable solid sorbent system. Key sorbent parameters required for the sorbents have been identified, including the heat of adsorption, heat capacity of the solid, delta CO2 loading between the absorption and regeneration steps, and any role co-sorption of competitive gases, such as moisture, may play. Other sorbent properties, such as the effect of acid gases within the flue gas or the attrition of the sorbent, must be considered in the reactor design. These factors all impact the reactor design for a particular type of sorbent. For a generic sorbent, reactor designs have been formulated, including a stationary, isothermal reactor, a fluidized bed, and a moving bed. Through calculations, benefits and disadvantages of the designs have been outlined. The implication of the sorbent properties (and thus desired experimental information) on sorbent reactor design are described, and recommendations for operation of these types of capture systems are discussed.

20 FOSSIL-FUELED POWER PLANTS↗