Search NASA⌕ Search

Engineering topics

Richardson, W.

Publications and source records attributed to Richardson, W..

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Coaxial microwave electrothermal thruster performance in hydrogen

The microwave electro thermal thruster (MET) is an electric propulsion concept that offers the promise of high performance combined with a long lifetime. A unique feature of this electric propulsion concept is its ability to create a microwave plasma discharge separated or floating away from any electrodes or enclosing walls. This allows propellant temperatures that are higher than those in resistojets and reduces electrode and wall erosion. It has been demonstrated that microwave energy is coupled into discharges very efficiently at high input power levels. As a result of these advantages, the MET concept has been identified as a future high power electric propulsion possibility. Recently, two additional improvements have been made to the coaxial MET. The first was concerned with improving the microwave matching. Previous experiments were conducted with 10-30 percent reflected power when incident power was in excess of 600 W(exp 6). Power was reflected back to the generator because the impedance of the MET did not match the 50 ohm impedance of the microwave circuit. To solve this problem, a double stub tuning system has been inserted between the MET and the microwave power supply. The addition of the double stub tuners reduces the reflected power below 1 percent. The other improvement has prepared the coaxial MET for hydrogen experiments. To operate with hydrogen, the vacuum window which separates the coaxial line from the discharge chamber has been changed from teflon to boron nitride. All the microwave energy delivered to the plasma discharge passes through this vacuum window. This material change had caused problems in the past because of the increased microwave reflection coefficients associated with the electrical properties of boron nitride. However, by making the boron nitride window electrically one-half of a wavelength long, power reflection in the window has been eliminated. This technical note summarizes the experimental performance of the improved coaxial MET when operating in nitrogen, helium, and hydrogen gases.

Richardson, W.↗
NASA NTRS1986

Degenerate four-wave mixing in a mercury-argon discharge

Phase conjugation has been obtained with pump powers as low as 0.5 mW on the 546.1-nm line of atomic mercury. Collisional processes that oppose the effects of optical pumping sustain the signal. Line splittings observed in the Doppler regime are compared with theory. Reflectivities agree with those obtained from a model that includes pump absorption.

Richardson, W.↗
NASA NTRS1979

A study of the tolerance block approach to special stratification

The author has identified the following significant results. Twelve winter wheat LACIE segments in Kansas were used to compare the performance of three clustering methods: (1) BCLUST, which uses a spectral distance function to accumulate clusters; (2) blocks-alone, which divides spectral space into equally populated blocks; and (3) block-seeds, which uses spectral means of blocks-alone as seeds for accumulating distance-type clusters. Both BCLUST and block-seeds performed equally well and outperformed blocks-alone significantly. Their average variance ratio of about 0.5 showed imperfect separation of wheat from non-wheat. This result points to the need to explore the achievable crop separability in the spectral/temporal domain, and suggest evaluating derived features rather than data channels as a means to achieve purer spectral strata.

Richardson, W.↗
NASA NTRS1979

Feature extraction applied to agricultural crops as seen by LANDSAT

The physical interpretation of the spectral-temporal structure of LANDSAT data can be conveniently described in terms of a graphic descriptive model called the Tassled Cap. This model has been a source of development not only in crop-related feature extraction, but also for data screening and for haze effects correction. Following its qualitative description and an indication of its applications, the model is used to analyze several feature extraction algorithms.

Kauth, R. J.↗
NASA NTRS1979

Signature extension methods in crop area estimation

The Procedure B multispectral processing system is both multisegment and multistratum. It uses data from several LACIE-sized segments together and makes a proportion estimate for the entire group of segments as well as for the individual segments. In the clustering of data features, Procedure B produces multiple classes or strata rather than just two strata (as in Procedure 1), and performs stratified sampling on each of these mutliple strata in order to make a proportion estimate. Tests results for the components and for the overall performance of Procedure B are presented, and conclusions that can be drawn from these tests are discussed. The rationale for signature extension for crop area estimation is summarized.

Kauth, R. J.↗
NASA NTRS1979

Large Area Crop Inventory Experiment (LACIE). Development of procedure M for multicrop inventory, with tests of a spring-wheat configuration

The author has identified the following significant results. An outgrowth of research and development activities in support of LACIE was a multicrop area estimation procedure, Procedure M. This procedure was a flexible, modular system that could be operated within the LACIE framework. Its distinctive features were refined preprocessing (including spatially varying correction for atmospheric haze), definition of field like spatial features for labeling, spectral stratification, and unbiased selection of samples to label and crop area estimation without conventional maximum likelihood classification.

Horvath, R.↗
NASA NTRS1976

Evaluation of algorithms for estimating wheat acreage from multispectral scanner data

The author has identified the following significant results. Fourteen different classification algorithms were tested for their ability to estimate the proportion of wheat in an area. For some algorithms, accuracy of classification in field centers was observed. The data base consisted of ground truth and LANDSAT data from 55 sections (1 x 1 mile) from five LACIE intensive test sites in Kansas and Texas. Signatures obtained from training fields selected at random from the ground truth were generally representative of the data distribution patterns. LIMMIX, an algorithm that chooses a pure signature when the data point is close enough to a signature mean and otherwise chooses the best mixture of a pair of signatures, reduced the average absolute error to 6.1% and the bias to 1.0%. QRULE run with a null test achieved a similar reduction.

Nalepka, R. F.↗
NASA NTRS1976

Number of signatures necessary for accurate classification

This paper presents a procedure for determining the number of signatures to use in classifying multispectral scanner data. A large initial set of signatures is obtained by clustering the training points within each category (such as 'wheat' or 'other') to be recognized. These clusters are then combined into broader signatures by a program that considers each pair of signatures within a category, combines the best pair in the light of certain criteria, saves the combined signature and repeats the procedure until there is one signature for each category. The result is a collection of sets of signatures, one set for each number between the number of initial clusters and the number of categories. With the aid of statistics such as an estimate of the probability of misclassification between categories, the user can choose the smallest set satisfying his requirements for classification accuracy.

Richardson, W.↗
NASA NTRS1975

Multispectral processing based on groups of resolution elements

Several nine-point rules are defined and compared with previously studied rules. One of the rules performed well in boundary areas, but with reduced efficiency in field interiors; another combined best performance on field interiors with good sensitivity to boundary detail. The basic threshold gradient and some modifications were investigated as a means of boundary point detection. The hypothesis testing methods of closed-boundary formation were also tested and evaluated. An analysis of the boundary detection problem was initiated, employing statistical signal detection and parameter estimation techniques to analyze various formulations of the problem. These formulations permit the atmospheric and sensor system effects on the data to be thoroughly analyzed. Various boundary features and necessary assumptions can also be investigated in this manner.

Richardson, W.↗
NASA NTRS1974

A study of some nine-element decision rules

A nine-element rule is one that makes a classification decision for each pixel based on data from that pixel and its eight immediate neighbors. Three such rules, all fast and simple to use, are defined and tested. All performed substantially better on field interiors than the best one-point rule. Qualitative results indicate that fine detail and contradictory testimony tend to be overlooked by the rules.

Richardson, W.↗
NASA NTRS1974

Improvements in estimating proportions of objects from multispectral data

Methods for estimating proportions of objects and materials imaged within the instantaneous field of view of a multispectral sensor were developed further. Improvements in the basic proportion estimation algorithm were devised as well as improved alien object detection procedures. Also, a simplified signature set analysis scheme was introduced for determining the adequacy of signature set geometry for satisfactory proportion estimation. Averaging procedures used in conjunction with the mixtures algorithm were examined theoretically and applied to artificially generated multispectral data. A computationally simpler estimator was considered and found unsatisfactory. Experiments conducted to find a suitable procedure for setting the alien object threshold yielded little definitive result. Mixtures procedures were used on a limited amount of ERTS data to estimate wheat proportion in selected areas. Results were unsatisfactory, partly because of the ill-conditioned nature of the pure signature set.

Horwitz, H. M.↗
NASA NTRS1973

Discrimination techniques employing both reflective and thermal multispectral signals

Recent improvements in remote sensor technology carry implications for data processing. Multispectral line scanners now exist that can collect data simultaneously and in registration in multiple channels at both reflective and thermal (emissive) wavelengths. Progress in dealing with two resultant recognition processing problems is discussed: (1) More channels mean higher processing costs; to combat these costs, a new and faster procedure for selecting subsets of channels has been developed. (2) Differences between thermal and reflective characteristics influence recognition processing; to illustrate the magnitude of these differences, some explanatory calculations are presented. Also introduced, is a different way to process multispectral scanner data, namely, radiation balance mapping and related procedures. Techniques and potentials are discussed and examples presented.

Malila, W. A.↗
NASA NTRS1973

A study of techniques for processing multispectral scanner data

A linear decision rule to reduce the time required for processing multispectral scanner data is developed. Test results are presented which justify the use of the new rule for digital processing whenever both accuracy and processing time are important. A method of evaluating the performance of the rule is also developed and applied to the problem of choosing a subset of channels. A technique used to find linear combinations of channels is described. The ability to extend signatures throughout a small area of approximately fifty square miles is tested. After preprocessing, signatures derived from the first of seven overlapping data sets are applied to all data sets. The test results show that the average probability of misclassification tends to increase with an increase in the number of data sets over which the signatures are extended.

Crane, R. B.↗
NASA NTRS1972

Information extraction techniques for multi-spectral scanner data

Multispectral data recognition and information extraction problems considered are: (1) signature extension for improved recognition processing over large areas; (2) choice of density functions for recognition decision rules; (3) channel selection for cost reduction; and (4) radiation balance mapping for interpretation of wide spectrum scanner data. The formulation of a simulation model and reprocessing of both aircraft and space data reduces scan angle variations and extends signatures from one altitude to another. Comparison of the usefulness of empirical density functions and that of Gaussian density functions for recognition processing establishes the advantages of normal assumption for individual fields in processing of multispectral scanner data. Also reported is a procedure for producing radiation balance maps from wide spectra by analyzing energy budgets of vegetation and other surface materials through partitioning net absorbed radiant energy and estimating incoming power density at both short and long wavelengths.

Malila, W. A.↗
NASA NTRS1972

Rapid processing of multispectral scanner data using linear techniques.

Tests have been made to compare linear and quadratic techniques for processing multispectral scanner data. The tests have been limited to a few selected sets of agricultural data. Two aspects of processing were studied. The first, the selection of a subset of channels to be used in the decision function, was found to be faster by a factor of 50 when a linear method was used. Second, in recognition processing, our linear decision rule produced a lower error rate and utilized a larger number of channels for equal processing times. Nevertheless, when the criterion is lowest possible error rate, irregardless of processing time, the quadratic rule is preferable.

Crane, R. B.↗